Search results

A variety of biomass plantations are being raised for energy production. This case study is on energy production potential of seasonal oil bearing crops in India. These crops have the advantage of producing oil (liquid fuel) as well as biomass as agro residue (solid fuel). The purpose of the study is to estimate total energy yields of oil bearing crops and compare with other types of energy plantations. Also oil bearing crops bioaccumulate metals and thus phytoremediate soil. This provides scope for waste water irrigation.

Relevant published papers on energy production by raising oil bearing crops have been analyzed. The effect of waste water irrigation and agronomic practices on increasing productivity is given special attention.

It is shown that the seasonal oil bearing crops such as castor have a high potential to generate energy and this is comparable to energy produced by many perennial grasses. The energy yields of castor under irrigated condition was 196×103 MJ/ha and this is comparable to the reed canary grass which yields 195×103 MJ/ha. Some of the oil bearing crops are also super accumulators of certain toxic metals.

In this study, only all the accessible papers on the topic could be analyzed.

This case study indicates that raising oil bearing crops such as castor using waste water has many advantages which include high energy yields, utilization of waste water for productive purpose and phytoremediation of soil.

The comparison made between various types of energy crops for their energy generation is an original contribution. Findings of economic and environmental benefits by waste water irrigation are also of value.

The study aimed at developing the bioremediation model of Lapindo mud through multisymbiotic organism.

The research was conducted using completely randomized design. The model plants chosen in this research were soybean. The interaction pattern during the treatment was used to develop the bioremediation model based on the parameters.

The results showed that there was an effect of the type of organism on the parameters, namely: the growth of plant (biomass, height, length of root, and number of leaves), the biomass of root nodules, the percentage of mycorrhizal infection, the content of water, nitrogen, phosphorus, and total petroleum hydrocarbons (TPHs). There was a pattern of multisymbiotic interaction between each organism and roles of each symbiont in that interaction. Therefore, the plants were capable of surviving in the environment of Sidoarjo Lapindo mud. This pattern can be named as the bioremediation model proposed, which is the analogy of tripartite symbiosis between plants, mycorrhizae, and Rhizobium but also adding plant growth bacteria such as phosphate-solubilizing bacteria and hydrocarbon degradation bacteria. The implementation of this model can be used to treat oil-contaminated soil in order to be used as a plant growth medium.

Phytoremediation is a new and promising approach to remove contaminants in the environment but using plants alone for remediation confronts many limitations. Therefore, the application of plant-growth-promoting rhizobia (PGPR) has been extended to remediate contaminated soils in association with plants (Zhuang et al., 2007). The development of the model will use the analogy of tripartite symbiosis between plants, mycorrhizae, and Rhizobium. The developed model will be based on the interaction pattern on each parameters obtained. Bioremediation is chosen because it is considered an effective technique to transform toxic components into less toxic products without disrupting the surrounding environment. Besides, bioremediation is cheaper and environment-friendly because it utilizes microorganisms to clean pollutants from the environment (Nugroho, 2006).

Sustainability involves a strong interrelationship of ecological, cultural, technological, scientific, economic and social aspects and deserves to undertake a holistic treatment. Abundant evidence has being collected related to the several risks and conflicts derived from unsustainable oil exploitation and fossil fuel energy sources. In the past few years, several environmentally friendly technologies are being developed for oil exploitation in the Argentine Patagonia. The purpose of this paper is to examine them under a holistic prospect to provide an overall outlook for a wide audience and making it attractive for teaching sustainability in higher education.

The environmentally friendly technologies chosen to be examined are Green Chemistry, cleaner production processes and alternative energy sources. Vaca Muerta, located at Neuquén Basin in Argentine Patagonia, is one of the world’s major deposits of tight oil and shale gas. Fracking technology, required for this exploitation, is controversial; it poses critical issues concerning ecological risks such as oil leakage and serious soil damage.

Research results on the germination of a native gramineae in polluted soils are described in this paper under several conditions and show its potential for the phytoremediation of damages aroused from unsustainable oil exploitation. In addition, student’s feedback regarding fracking was examined by a questionnaire presenting different and contradictory perspectives with open and Likert-type items. This study complements previous observation on the open acceptance of the Green Chemistry fundamentals as the contribution of the scientific-technological knowledge to the sustainable development and higher education approaches from Argentina.

A clear result of these experiences is that the immediate impact is stronger that that noted when just scientific and technological aspects are taught; teachers expressed they would try to repeat these exercises in their classes in middle and high schools. This feeling of fear is important for people to understand the severity of climate change, though it is also essential to help people move past fear, to use the urgency of the problem to motivate action. Results of this research suggest that the best way to understand climate risks is interactive learning.

This study describes related scientific, technological and societal research in the fields of soil remediation and sustainable production that are key values in higher education, as scientific and societal communities play an essential role. From a holistic approach to a complex problem, this paper describes research on different aspects that converge into the viewing of the radical change in the society’s behavior that is urgently required for a sustainable development in harmony with the planet. In spite of their importance, there are few publications with an interdisciplinary overview about sustainable development in Latin America. The value and originality of this work is that it focuses on the need of teaching sustainability in different areas of higher education with a holistic prospect.

Discusses the responses of plants to a variety of environmental stresses and considers different techniques that could potentially be used to detect and amplify such responses. Because plants may naturally produce steroids in response to raised stress levels, the paper suggests that genetic modification of crop plants to improve resistance to stress is worth investigating as a strategy. Sensitive to public concerns about the safety of transgenic crops, the authors suggest using such plants in carefully controlled locations.

Nature-based solutions (NBS) generate different impacts at the urban scale, such as the ability to regulate water or store carbon, comparable to traditional, gray infrastructures in a more cost-efficient way. On the other hand, by their intrinsic nature, NBS do deliver a series of other services that are commonly defined as social, economic, and environmental cobenefits. These benefits are not always valued in a consistent and complete way, so there is the need to compile a more comprehensive evidence base on the social, economic, and environmental effectiveness of NBS. The chapter attempts to identify a categorization of the existing NBS and define the ecosystem services (ES) provided by them. Furthermore, starting from the results achieved through the definition of the existing NBS frameworks assessment, the chapter will identify a set of key performance indicators KPIs, based on the ES produced by NBS, to measure the economic, social, and environmental benefits generated in by NBS at the urban level taking into account their multifunctional character. In total, 66 key performance indicators have been individuated: 3 for provisioning services, 38 for regulating services, 17 for cultural services, and 8 for supporting services. Each indicator has been associated to a category of ES in order to measure and evaluate the performances of NBS implemented in cities.

The purpose of this paper is to elucidate the effect of part thickness and build orientation upon the type and magnitude of distortion in material jetting processes.

Specimens with high (10:1) aspect ratio were printed in two orientations (XY and YX) and three thickness values (1, 3 and 6 mm) and scanned with a white-light profilometer to quantify distortion.

The results of this paper indicate that 1-mm thick specimens always distorted following a wavy edge type, while thicker specimens (3- and 6-mm) always distorted following a reverse coil set. The factor thickness, when measured with the indices height of the highest peak (H) and profile radius (R), was shown to be statistically significant, with 3-mm specimens experiencing distortions of 57 and 51 per cent, respectively, more severe than those in 6-mm specimens. The thickness effect is attributed to the percentage of build layers that receive maximum energy exposure (61-72 per cent in 1-mm, 87-91 per cent in 3-mm and 93-95 per cent in 6-mm specimens). With respect to the thinner 1-mm specimens, the factor orientation was found to be statistically significant with distortion 114 per cent less severe in the YX orientation when measured by the H index.

This paper provides the first known description of build orientation and part thickness effects on dimensional distortion as a pervasive consequence of the curing process in photopolymerization and explores one of the most common defects encountered in additive manufacturing. In addition to the characterization of the type and magnitude of distortion, the contributions of this paper also include establishing the foundation for design guidelines aiming at minimizing distortion in material jetting.

The purpose of this paper is to understand the critical factors associated with growing fertilizer usage culminating in contamination of soil/water in agriculturally intensive regions of Uttar Pradesh, India. The agriculture sector is seen as one of the major contributors in ensuring food security, however adoption of sustainable agriculture to protect water resources from contamination due to fertilizers and pesticides is becoming pressing to achieve long term environmental security.

A two staged study aimed at monitoring the soil quality status followed by stakeholder survey has been attempted. Attitude-behavior framework based on the theory of reasoned action has been tried to explain the fertilizer use behavior in the study. The results are analyzed through Analysis of variance.

Soil monitoring data showed nitrate and total nitrogen loadings beyond the permissible limit in the identified regions. A questionnaire aimed at determining farmer’s attitude toward fertilizer usage showed a significant influence of factors like net farm income, overall farm yield, extension services, farmer characteristics on one hand and risks associated with changing farming practices, costs of substitutes available, market-based instruments like subsidies and loans on the other. Divergent responses were observed with respect to farmer’s perceived risks from adopting to organic substitutes, linkages of fertilizer application with environmental degradation and the level of adoption of sustainable agricultural practices.

The study can be scaled up to study the inter-regional differences by benchmarking regional responses. It would be interesting to extend the work to find solutions from the farmers as alternative fertility management strategies. The items used in questionnaire are self-made; hence there is still a possibility of enhancing the robustness of scale by applying advanced statistical techniques.

Results of the study indicate excessive nitrogen loadings in farm soils which is an indicator of potential future nitrate contaminated zones or vulnerable zones emerging in agricultural intensive regions. Findings reinforce the role of education, knowledge transfer and awareness for long-term agricultural sustainability. The paper highlights the urgency for reorientation of the support system by the government and policymakers.

The paper attempts to understand the linkage between the agricultural productivity and the environmental implications followed by the reasons culminating in the agri-environmental imbalance. On-site monitoring study followed by assessment of reasons culminating in this scenario has not been attempted earlier and this paper contributes to understanding at dual level. This paper emphasizes on the insights of stakeholder which is instrumental in ensuring agricultural sustainability or otherwise. It takes the position that the farmer’s farm management behavior is strongly influenced by factors like food security and income, keeping environmental quality at second place. It also identifies the barriers for organic farming and other alternative systems as well as explores the economic, social, and philosophical aspects of sustainable agriculture.

There is a connection between cotton production and the Aral Sea disaster in Uzbekistan. Large-scale cotton production utilizes the practices of conventional agriculture and has severe environmental consequences in arid regions. Some of these problems, such as salinization, currently exist in Uzbekistan as a result of cotton production and these conventional farming practices. This chapter is a review of cotton production, the environmental consequences of conventional agriculture, and its relationship to the Aral Sea Disaster. Storm water management with biofiltration, sustainable farming practices, efficient irrigation, ecological horticultural practices, and a water conservation program are remedies that can help to reduce the environmental degradation caused by cotton production and restore some of the water resources in Uzbekistan.

The current era is characterized by hyperturbulence, population growth, attention to food security, the need to identify sustainable strategies to reduce pollution and poverty, and the disparity between developed and undeveloped economies. These circumstances force a global paradigm shift based on sustainable practices and processes that put people and the environment at the core of each activity, contributing to sustainable, social, and economic development and promoting well-being in the community.

In this spirit, a strong impulse can derive from the practices of Green Technology, considered here as that set of processes aimed at eco-sustainability that acquire undisputed relevance, especially for emerging economies.

This chapter focuses on the role that Green technology practices exert in generating local well-being in the world's fifth-largest country: Brazil. Dynamic growth and effective social policies lifted millions of people out of poverty in the 2000s, even if socio-economic development varies widely across the country. Brazil is a leading global agricultural, minerals, and oil producer. The natural environment represents the primary source of Brazil's development that deserves to be protected and push firms and citizens to find new sustainable solutions based on green policies. Drawing inspiration from a Brazilian case study, this chapter proposes a set of building blocks that foster sustainable business practices in emerging countries.

The chapter is organized as follows: the first part introduces the concept of green technology practices; the second highlights the opportunities of green technologies; the third focuses on a single case study.