Search results

The purpose of this paper is to obtain ZnO‐SiO₂ oxide composites of low bulk density, high homogeneity and consisting of the smallest possible particles. The optimum parameters of precipitation of ZnO‐SiO₂ oxide composites impregnated with natural latex rubber were established. The formation and impregnation the ZnO‐SiO₂ oxide composites were made to occur simultaneously.

The influence of non‐ionic surfactants added during the precipitation process on the physico‐chemical properties of the oxide systems obtained was investigated. The products were characterised by determination of bulk density, absorption capacities of water and paraffin oil, particle size distribution (applying NIBS and laser diffraction methods), as well as SEM observations of surface morphology and microstructure. Moreover, the colorimetric characteristics of the oxide composites obtained and sedimentation profiles in water were analysed. Energo‐dispersive microanalysis of the products enabled determination of the content of ZnO and SiO₂. The surface area (BET) and the size and volume of pores were also estimated.

Modification of the oxide composites with nonylphenylpolyoxyethyleneglycol ethers was found to improve the basic physico‐chemical parameters of the ZnO‐SiO₂ hybrid systems and to change the character of its surface to become more hydrophobic. The conditions in which samples with the best properties were obtained were concluded to be optimum.

Only the selected non‐ionic surfactants were applied as modifying agents of ZnO‐SiO₂.

There is a possible application of ZnO‐SiO₂ oxide composites as activators of rubber compounds and barrier materials in textiles.

The proposed method of ZnO‐SiO₂ oxide composite synthesis in the process of precipitation with simultaneous modification with non‐ionic surfactants provides products with desirable dispersive‐morphological parameters and a hydrophobic surface character.

This paper aims to express in detail the rheological, morphological and thermal properties of unpigmented and pigmented styrene-butadiene rubber composites with new prepared inorganic pigment based on kaolin covered with a thin layer of calcium and magnesium oxides or mixed oxide of both together. These new pigments combine the properties of both their constituents (kaolin and metal oxides), which are a new trend in inorganic pigments called core-shell pigments. The pigments used for comparison are kaolin (K), CaO/kaolin (CaO/K), MgO/kaolin (MgO/K) and CaO.MgO/kaolin (CaO.MgO/K).

The different pigments were characterized using different analytical and spectrophotometric techniques, such as X-ray diffraction, scanning electron microscopy/energy dispersive X-ray and transmission electron microscopy, while rubber vulcanizates' rheological, morphological, swelling and thermal properties were examined using different standard and instrumental testing and methods.

The study revealed that there is a significant effect of the new prepared pigments on SBR properties, where the optimum pigment loading was 40 phr for CaO/kaolin, while it was 2.5 phr for MgO/kaolin. Studying the effect of different ratios of oxides on kaolin (5, 10 and 20 per cent), different loadings of these pigments ranging between 2.5 and 40 phr were done for each pigment. These modified kaolin or core-shell metal oxide/kaolin pigments imparted new and improved reinforcing properties to SBR vulcanizates.

No research limitations were found.

Core-shell MgO/kaolin pigments are eco-friendly and can replace other expensive pigments that are usually used as fillers in the rubber industry with less expenses and comparable efficiency.

These new pigments are cheap and efficient and can be used in different fields other than rubber.

Aims to focus on temperature sensors.

Negative temperature co‐efficient thermistor powders of ternary Mn, Co, Ni oxide along with RuO₂ synthesized at relatively moderates temperature (1,000°C). Thick film thermistor paste compositions were formulated by mixing the semiconducting oxide powder, glass frit and organic vehicle. The physico‐chemical analysis, viz. X‐ray diffraction, scanning electron microscopy and thermogravimetry and IR spectroscopy were carried out for the synthesized powder and the resultant thick films. The X‐ray analysis of the powders showed the cubic spinel structure. The electrical properties like thermistor constant, sensitivity index and activation energy of the thick film NTC thermistor were determined.

The room temperature resistance is observed to range from 490 KΩ to 4.13 MΩ with thermistor constant ranging from 3,275 to 3,980 K, in the temperature range of 25‐300°C.

Describes research work on temperature sensors that are used for monitoring and control in many fields such as in home appliances, manufacturing industries, biomedical and automobile industries.

This study aims to fabricate an electrospun scaffold by combining radish (Ra) and cerium oxide (CeO₂) into a polyurethane (PU) matrix through electrospinning and investigate its feasibility for cardiac applications.

Physicochemical properties were analysed through various characterization techniques such as scanning electron microscopy (SEM), Fourier transforms infrared transforms analysis (FTIR), contact angle measurements, thermal analysis, atomic force microscopy (AFM) and mechanical testing. Further, blood compatibility assessments were carried out through activated partial thromboplastin time (APTT) and prothrombin time (PT) and hemolysis assay to evaluate the anticoagulant nature.

PU/Ra and PU/Ra/CeO₂ exhibited a smaller fibre diameter than PU. Ra and CeO₂ were intercalated in the polyurethane matrix which was evidenced in the infrared analysis by hydrogen bond formation. PU/Ra composite exhibited hydrophilic nature whereas PU/Ra/CeO₂ composite turned hydrophobic. Surface measurements depicted the lowered surface roughness for the PU/Ra and PU/Ra/CeO₂ compared to the pristine PU. PU/Ra and PU/Ra/CeO₂ displayed enhanced degradation rates and improved mechanical strength than the pristine PU. The blood compatibility assay showed that the PU/Ra and PU/Ra/CeO₂ had delayed blood coagulation times and rendered less toxicity against red blood cells (RBC’s) than PU.

This is the first report on the use of radish/cerium oxide in cardiac applications. The developed composite (PU/Ra and PU/Ra/CeO₂) with enhanced mechanical and anticoagulant nature will serve as an indisputable candidate for cardiac tissue regeneration.

The purpose of this paper is to propose a new method of synthesis of CuO · SiO₂ oxide composite based on the reaction of precipitation from water solutions of sodium silicate and copper nitrate.

Solutions of sodium silicate and copper nitrate were used as substrates. The effects of direction of substrate supply, concentration, excess of reagents and temperature of precipitation on the physicochemical properties of the products were analysed.

A new method of synthesis of CuO · SiO₂ oxide composite based on a precipitation reaction is proposed.

Only sodium silicate and copper nitrate solutions were used.

The CuO · SiO₂ oxide composite obtained can be used as blue pigment or polymer filler.

The paper determines optimum conditions of CuO · SiO₂ oxide composite precipitation to obtain products with desired physicochemical, dispersive and structural properties.

The purpose of this paper is to report on a method of synthesis of TiO₂‐SiO₂ oxide composites characterised by spherically shaped particles with sizes in the micrometric ranges, which can be applied as a new generation of textile/TiO₂‐SiO₂ composites with barrier properties against UV radiation. Synthesis and characterisation of TiO2‐SiO2 oxide composites with a high degree of dispersion were performed, and their influence on the barrier properties of textile fabrics was investigated.

The precipitation was performed with the use of solutions of titanium sulphate and sodium silicate as the precipitating agent, which are cheap alternatives to organic precursors of Ti and Si. The reaction was conducted in an emulsion system, where cyclohexane was used as the organic phase and non‐ionic surfactants NP3 and NP6 as emulsifiers were applied.

The direction of substrate supply, concentration of the reagents and their ratio and other conditions of precipitation process were found to significantly affect the physicochemical parameters of the pigments obtained. A possibility is provided of manufacturing a new generation of textile/TiO2‐SiO2 composites with barrier properties against UV radiation.

Titanium sulphate, sodium silicate, cyclohexane as the organic phase, and non‐ionic surfactants NP3 and NP6 as emulsifiers, were used.

Synthesis of a new generation of textile/TiO2‐SiO2 composites with barrier properties against UV radiation has been performed. Textile fabrics modified with hybrid composites demonstrated high absorption of UV radiation over the full wavelength range.

Determination of optimum conditions of TiO2‐SiO2 oxide composites precipitation to obtain products with desired physicochemical, dispersive and structural properties. Development of nano‐structural textile composites with barrier properties, protecting against UV radiation.

The purpose of this paper is to study the properties of disc type negative temperature coefficient (NTC) thermistors based on the spinel system Mn‐Co‐Ni‐O with the doping of RuO₂ for the low‐resistance applications.

Emphasis was placed on the properties of ruthenium dioxide doped manganite spinel system for low‐resistance applications. The properties such as microstructure, X‐ray diffraction analysis and electrical properties are reported.

The prepared NTC thermistor compositions revealed the room temperature resistance and thermistor constant in the range of 28‐2,950 Ω and 1,539‐3,428 K, respectively. Hence, the prepared NTC thermistors with low resistance and moderate sensitivity are suitable from an industrial applications point of view.

The paper reports upon a synthesis procedure which is a straightforward preparation of highly densified ternary oxide (Mn‐Co‐No‐O) thermistors.

The purpose of this paper is to introduce and analyze a new blast-wave impact-mitigation concept using advanced computational methods and tools. The concept involves the use of a protective structure consisting of bimolecular reactants displaying a number of critical characteristics, including: a high level of thermodynamic stability under ambient conditions (to ensure a long shelf-life of the protective structure); the capability to undergo fast/large-yield chemical reactions under blast-impact induced shock-loading conditions; large negative activation and reaction volumes to provide effective attenuation of the pressure-dominated shockwave stress field through the volumetric-energy storing effects; and a large activation energy for efficient energy dissipation. The case of a particular bimolecular chemical reaction involving polyvinyl pyridine and cyclohexyl chloride as reactants and polyvinyl pyridinium ionic salt as the reaction product is analyzed.

Direct simulations of single planar shockwave propagations through the reactive mixture are carried out, and the structure of the shock front examined, as a function of the occurrence of the chemical reaction. To properly capture the shockwave-induced initiation of the chemical reactions during an impact event, all the calculations carried out in the present work involved the use of all-atom molecular-level equilibrium and non-equilibrium reactive molecular-dynamics simulations. In other words, atomic bonding is not pre-assigned, but is rather determined dynamically and adaptively using the concepts of the bond order and atomic valence.

The results obtained clearly reveal that when the chemical reactions are allowed to take place at the shock front and in the shockwave, the resulting shock front undergoes a considerable level of dispersion. Consequently, the (conserved) linear momentum is transferred (during the interaction of the protective-structure borne shockwaves with the protected structure) to the protected structure over a longer time period, while the peak loading experienced by the protected structure is substantially reduced.

To the authors’ knowledge, the present work is the first attempt to simulate shock-induced chemical reactions at the molecular level, for purposes of blast-mitigation.

This paper aims to investigate the tribological properties of two protic ionic liquids used as lubricity-improving additives in the water. Their concentration was optimized for different metal friction pairs including bearing steel, stainless steel and aluminum alloy.

In this study tribological properties were investigated by using a ball-on-plate reciprocating tribometer. Three different friction pairs were selected: bearing steel-bearing steel; bearing steel-stainless steel; bearing steel-aluminum alloy. To optimize the concentration of investigated protic ionic liquids four concentrations were selected. Wettability was investigated using the droplet method. The corrosiveness of additive-loaded water was investigated using the iron chip method.

The results show that by using protic ionic liquids the lubricity of water could be greatly improved. However, the friction pair material and additive concentration play a significant role. The positive tribological effect was attributed to the polarity of the additive molecule which tends to form an adsorption layer. The polarity of molecules also leads to better surface wettability. It was also found that both investigated protic ionic liquids can improve the anticorrosion properties of water.

To the best of the authors’ knowledge, this is the first study to present a complex investigation of tribological properties of two protic ionic liquids as additives in the water. In this case, three different metal friction pairs and four additive concentrations were investigated. The results could be interesting to those who are working in the field of water-based lubricants and luck for multipurpose lubricity-improving additives.

The purpose of this paper is to present the preparation of core-shell ferrites/kaolin pigments and comparing their efficiency in protecting metal substrates to original ferrites which were also prepared. Core-shell structured particles are recently gaining lots of importance due to their exciting applications in different fields; these particles are constructed from cores and shells of different chemical compositions which show ultimately distinctive properties of varied materials different from their counterparts. The new core-shell pigment is based on shell of different ferrites that comprises only 10-20 per cent of the whole pigment on kaolin (cores) which is a cheap and abundant ore that comprises 80-90 per cent of the prepared pigment. The new pigments do not only comprise two different components, but they also contain pigment and extender in the same compound; their loadings in the paint formulations ranges from 50 and 75 per cent of the whole pigment. The work showed that these eco-friendly and cheap core-shell pigments are comparable in their efficiency to that of ferrites in protecting steel substrates.

The different ferrites and ferrites/kaolin pigments were characterized using different analytical and spectrophotometric techniques, such as X-ray fluorescence, X-ray diffraction (XRD), scanning electron microscopy/energy-dispersive X-ray (SEM/EDAX) and transmission electron microscopy (TEM). Evaluation of these pigments was done using international standard testing methods (ASTM). After evaluation, the pigments were incorporated in solvent-based paint formulations based on medium oil-modified soya-bean dehydrated castor oil alkyd resin. The physico-mechanical properties of dry films and their corrosion properties using accelerated laboratory test in 3.5 per cent NaCl for 28 days were determined.

The results of this work revealed that ferrite/kaolin core-shell pigments were close in their performance to that of the ferrite pigments in protection of steel, and at the same time, they verified good physico-mechanical properties.

Treated kaolin can be applied in many industries beside pigment manufacture and paint formulations; it can be applied as reinforcing filler in rubber, plastics and ceramic composites. Also, it is applied in paper filling, paper coatings and electrical insulation.

Ferrite and ferrite/kaolin are environmentally friendly and can replace other hazardous pigments (e.g. chromates) with almost the same quality in their performance; also, they can be used in industries other than paints, for example paper, rubber and plastics composites.