Search results

Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications.

This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market.

A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors.

Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.

This study aims to evaluate how corporate governance focused on meeting the legal requirements applied in poultry slaughterhouses contributes to the advancement of the Sustainable Development Goals (SDGs) within the environmental pillar and identify vulnerabilities in this governance framework.

This research was qualitative and was structured with the following steps: literature review, selection of companies and documentary research on licenses applied to these companies.

The assessment demonstrates that the governance strategy based on legal aspects contributes to progress in indicators related to SDGs such as clean water, climate action, life below water and life on land. However, it falls short when addressing SDG 7 on affordable and clean energy. Another vulnerability of this governance model is that legislation establishes metrics and indicators individually for each link in the poultry industry chain.

Assessment of the corporate governance of poultry slaughterhouses, focusing on legality and analyzing vulnerabilities in the legal aspects of the poultry industry concerning the SDGs that encompass the environmental pillar.

The results provide valuable information for policymakers, regulators and industry stakeholders in the segment, suggesting the need to align legislation with SDGs or adopt incentive policies to encourage the spontaneous advancement of SDGs in the poultry industry.

Considering the need for progress toward a more sustainable world and the trend of organizations focusing their efforts on complying with local legislation, this study aims to contribute to understanding how the legal requirements applied in practice are prepared to support the advancement of the SDGs.

The purpose of this study is to propose an extended reliability method for an industrial motor drive by integrating the physics of failure (PoF).

Industrial motor drive systems (IMDS) are currently expected to perform beyond the desired operating conditions to meet the demand. The PoF of the subsystem affects its reliability under such harsh operating circumstances. It is crucial to estimate reliability by integrating PoF, which helps in understanding its impact and to develop a fault-tolerant design, particularly in such an integrated drive system. An integrated PoF extended reliability method for industrial drive system is proposed to address this issue. In research, the numerical failure rate of each component of industrial drive is obtained first with the help of the MIL-HDBK-217 military handbook. Furthermore, the mathematically deduced proposed approach is modeled in the GoldSim Monte Carlo reliability workbench.

From the results, for a 15% rise in integrated PoF, the reliability and availability of the entire IMDS dropped by 23%, resulting in an impact on mean time to failure (MTTF).

The integrated PoF of the motor and motor controller affects industrial drive reliability, which falls to 0.18 with the least MTTF (2.27 years); whose overall reliability of industrial drive drops to 0.06 if it is additionally integrated with communication protocol.

This paper explores Lean Six Sigma principles and the DMAIC (define, measure, analyze, improve, control) methodology to propose a new Lean Six Sigma 4.0 (LSS 4.0) framework for employee occupational exams and address the real-world issue of high-variability exams that may arise.

This study uses mixed methods, combining qualitative and quantitative data collection. A detailed case study assesses the impact of LSS interventions on the exam management process and tests the applicability of the proposed LSS 4.0 framework for employee occupational exams.

The results reveal that changing the health service supplier in the explored organization caused a substantial raise in occupational exams, leading to increased costs. By using syntactic interoperability, lean, six sigma and DMAIC approaches, improvements were identified, addressing process deviations and information requirements. Implementing corrective actions improved the exam process, reducing the number of exams and associated expenses.

It is important to acknowledge certain limitations, such as the specific context of the case study and the exclusion of certain exam categories.

The practical implications of this research are substantial, providing organizations with valuable managerial insights into improving efficiency, reducing costs and ensuring regulatory compliance while managing occupational exams.

This study fills a research gap by applying LSS 4.0 to occupational exam management, offering a practical framework for organizations. It contributes to the existing knowledge base by addressing a relatively novel context and providing a detailed roadmap for process optimization.

The objective of this study was to evaluate the technical-economic process efficiency of obtaining simultaneous lipo-soluble (LSF) and water-soluble (WSF) fractions from annatto seeds.

The batches of annatto seeds were submitted to the refrigerated solid-liquid extraction process in four stages: pre-extraction, aqueous extraction, separation by decantation and filtration. After that, LSF and WSF from annatto seeds were obtained. The process efficiency and the quality of LSF and WSF were analyzed in terms of average yield and bioactive compounds (bixin, norbixin, phenolics and flavonoids) and their antioxidant and antimicrobial activities. Furthermore, they were economically evaluated in terms of costs of manufacturing and profitability parameters.

The process was efficient in terms of overall average yield (LSF = 8.68% and WSF = 2.76%) (w/w) and in terms of quality, mainly with higher average yields of bixin (82.34% in LSF) and norbixin (29.59% in WSF) (w/w). The concentration of bioactive compounds in the fractions promoted an increase in inhibiting free radicals (DPPH* and ABTS*+) and in the ferric-reducing power (FRAP). LSF showed a minimum inhibitory concentration of 0.06 mg mL-1 for S. aureus and 0.13 mg mL-1 for S. Typhimurium and S. Enteritidis. The lowest manufacturing costs were obtained for the LSF due to its higher extraction yield compared to the WSF. Plants on an industrial scale of 100 and 1000 L were considered economically viable, with a return on investment of 5 and 2 years.

Thus, fractions (WSF and LSF) can be applied as natural additives, as sources of bioactive compounds for nutraceutical and/or pharmaceutical, and in the development of other innovative processes. These results have practical applicability for pharmaceutical and food industry.

1. Green processing of annatto seeds obtains fractions rich in antioxidant compounds.

2. Efficiently presents a high yield of bixin and other bioactive compounds.

3. Effective in concentrating compounds that inhibit microbial growth.

4. Fractions are more accessible sources of bioactive compounds for isolation.

5. Cost of manufacturing (COM) and profitability are studied.

Green processing of annatto seeds obtains fractions rich in antioxidant compounds.

Efficiently presents a high yield of bixin and other bioactive compounds.

Effective in concentrating compounds that inhibit microbial growth.

Fractions are more accessible sources of bioactive compounds for isolation.

Cost of manufacturing (COM) and profitability are studied.

This paper aims to investigate the ability of traditional biopolymers, such as funori or the nanoscale form of cellulose nanocrystals, to consolidate fragile paper and preserve it for as long as possible.

Degraded papers dating back two centuries were separated into paper samples for consolidation processes. Funori – a marine spleen – was used as a traditional consolidation material and a mixture with ZnO NPs compared with modern materials, such as cellulose nanocrystals. The samples were aged for 25 years, examinations and analyses were performed using scanning electron microscopy and color change was assessed using the CIELAB system, X-ray diffraction and Fourier-transform infrared spectroscopy.

According to the results, using traditional materials to consolidate damage, such as funori, after aging resulted in glossiness on the surface, a color change and increased water content and oxidation. Furthermore, samples treated with a mixture of ZnO NPs and funori revealed that the mixture improved the sample properties and increased the degree of crystallization. Cellulose nanocrystals improved the surface, filled gaps, formed bridges between the fibers and acted as a protector from aging effects.

This paper highlights the ability of nanomaterials to enhance the properties of materials as additives and treat the paper manuscripts from weaknesses.

This photovoice study aims to explore how cleaners experience dirty and invisible work in the workplace.

This research is twofold. The authors first used the photovoice technique, which is one of the visual data collection techniques, to elaborate on the phenomena. The data were obtained with the participation of seven people (four women and three men) from building cleaners working at two public universities in Turkey. Three photographs were requested from each participant and selected nine photographs were described and analyzed among the collected 21 photographs. In addition to photovoice research, five interviews gave insight into the cleaners’ experiences in the second stage of the study.

This research revealed that participating cleaners experienced invisible dirty work and they felt undervalued, despised, treated as “second class/low-level people” and stigmatized.

This study recommends that university administrations defend the rights and dignity of cleaners at work, provide services to support their inclusion and increase staff awareness.

This study sheds light into an understudied area which is the building cleaners’ invisible and dirty work experiences and how that impacts their lives via a photovoice research.

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Sodium silicate is adopted as a substrate for GO and AgNPs with positive charge are used as modifiers. The synthesized nanocomposite is characterized by FTIR, FESEM, EDS, BET and XRD techniques. Then, some of the most effective parameters on the removal of CR and MB dyes such as solution pH, sorbent dose, adsorption equilibrium time, primary dye concentration and salt effect are optimized using the spectrophotometry technique.

The authors successfully achieved notable maximum adsorption capacities (Qmax) of CR and MB, which were 41.15 and 37.04 mg g⁻¹, respectively. The required equilibrium times for maximum efficiency of the developed sorbent were 10 and 15 min for CR and MB dyes, respectively. Adsorption equilibrium data present a good correlation with Langmuir isotherm, with a correlation coefficient of R2 = 0.9924 for CR and R2 = 0.9904 for MB, and kinetic studies prove that the dye adsorption process follows pseudo second-order models (CR R2 = 0.9986 and MB R2 = 0.9967).

The results showed that the proposed mechanism for the function of the developed sorbent in dye adsorption was based on physical and multilayer adsorption for both dyes onto the active sites of non-homogeneous sorbent.

The as-prepared nano-adsorbent has a high ability to remove both cationic and anionic dyes; moreover, to the high efficiency of the adsorbent, it has been tried to make its synthesis steps as simple as possible using inexpensive and available materials.

Rare book collections are special, not only in terms of their physical appearance but also because of their historical significance and the information they contain. The purpose of this study is twofold: to identify the physical condition of rare book collections and to determine the main causes of damage to rare books collection that belongs to a museum library in Indonesia.

This research involved conducting a survey of the physical condition of the collection of rare books owned by a museum library in Indonesia. Supporting data was also obtained through interviews with one of the staff who served as the museum collection conservator. This study used random sampling to take samples from the collection, which consisted of 950 rare books, with total sample of 91.

The results obtained state that the condition of the existing rare book collection is classified as severely damaged. One of the causes of damage that can be addressed immediately is the cleaning regime: the collection and library space should be cleaned thoroughly and regularly so that dust and dirt in and around the rare book collection can be reduced.

This research was limited to physical identification, which can be done easily because it does not require various kinds of laboratory tests. It was a case study examining a single collection in a single museum library. The pool of books from which the samples were taken was therefore relatively homogenous. Therefore, it is hoped that further research can identify other factors and types of damage in more detail so that all damage to rare book collections can be identified and mitigated.

Research discussing the condition of rare book collections, especially for special libraries in museums in Indonesia, is still very limited. Detailed surveys of the physical condition of collections, especially rare book collections in museums, have rarely been discussed by previous research. The work will contribute to assessing the physical condition of rare book collections.

In this study, an attempt has been made to collect the research that has been done on the construction and design of the H₂O₂ sensor. So far, many efforts have been made to quickly and sensitively determine H₂O₂ concentration based on different analytical principles. In this study, the importance of H₂O₂, its applications in various industries, especially the food industry, and the importance of measuring it with different techniques, especially portable sensors and on-site analysis, have been investigated and studied.

Hydrogen peroxide (H₂O₂) is a very simple molecule in nature, but due to its strong oxidizing and reducing properties, it has been widely used in the pharmaceutical, medical, environmental, mining, textile, paper, food production and chemical industries. Sensitive, rapid and continuous detection of H₂O₂ is of great importance in many systems for product quality control, health care, medical diagnostics, food safety and environmental protection.

Various methods have been developed and applied for the analysis of H₂O₂, such as fluorescence, colorimetry and electrochemistry, among them, the electrochemical technique due to its advantages in simple instrumentation, easy miniaturization, sensitivity and selectivity.

Monitoring the H₂O₂ concentration level is of practical importance for academic and industrial purposes. Edible oils are prone to oxidation during processing and storage, which may adversely affect oil quality and human health. Determination of peroxide value (PV) of edible oils is essential because PV is one of the most common quality parameters for monitoring lipid oxidation and oil quality control. The development of cheap, simple, fast, sensitive and selective H₂O₂ sensors is essential.