Search results

Silicon photovoltaics technology has drawbacks of high cost and power conversion efficiency. In order to extract the maximum output power of the module, maximum power point (MPP) is used by implying the nonlinear behavior of I-V characteristics. Different techniques are used regarding maximum power point tracking (MPPT). The paper aims to review the techniques of MPPT used in PV systems and review the comparison between Perturb and Observe (P&O) method and incremental conductance (IC) method that are used to track the maximum power and gives a comparative review of all those techniques.

A study of MPPT techniques for photovoltaic (PV) systems is presented. Matlab Simulink is used to find the MPP using P&O simulation along with IC simulation at a steady temperature and irradiance.

MATLAB simulations are used to implement the P&O method and IC method, which includes a PV cell connected to an MPPT-controlled boost converter. The simulation results demonstrate the accuracy of the PV model as well as the functional value of the algorithms, which has improved tracking efficiency and dynamic characteristics. P&O solution gave 94% performance when configured. P&O controller has a better time response process. As compared to the P&O method of tracking, the incremental conductance response rate was significantly slower.

In PV systems, MPPT techniques are used to optimize the PV array output power by continuously tracking the MPP under a variety of operating conditions, including cell temperature and irradiation level.

The paper aims to present a grid-connected multi-inverter for solar photovoltaic (PV) systems to enhance reliability indices after selected the placement and level of PV solar.

In this study, the associated probability is calculated based on the solar power generation capacity levels and outages conditions. Then, based on this probability, dependability indices like average energy not supplied (AENS), expected energy not supplied and loss of load expectations (LOLE) are computed, also, another indices have been computed such as (customer average interruption duration index (CAIDI), system average interruption frequency index (SAIFI) and system average interruption duration index (SAIDI)) addressing by affected customers with distribution networks reliability assessment, including PV. On the basis of their dependability indices and active power flow, several PV solar modules installed in several places are analyzed. A mechanism for assessing the performance of the grid's integration of renewable energy sources is also under investigation.

The findings of this study based on data extracted form a PV power plant connected to the power network system in Diyala, Iraq 132 kV, attempts to identify the system's weakest points in order to improve the system's overall dependability. In addition, enhanced reliability indices are given for measuring solar PV systems performance connected to the grid and reviewed for the benefit of the customers.

The main contributions of this study are two methods for determining the reliability of PV generators taking into consideration the system component failure rates and the power electronic component defect rates in a PV system which depend on the power input and the power loss using electrical transient analysis program (ETAP) program.

The purpose of this paper is to propose a conceptual framework for handling end of life (henceforth EoL) scenarios of solar photovoltaic (solar PV) panels, which includes different options available to businesses and end-users, as well as promoting the collaboration between government and all relevant stakeholders.

This paper adopts purposeful sampling, secondary data and content analysis to develop an appropriate conceptual framework that helps to create awareness of the appropriate options for dealing with the EoL cases of solar PV panels.

From the data analysis, it is revealed that reuse, repair and recycling of solar PV panels can ensure value creation, public-private partnership and a solution for education in sustainability, and thus, prolonging the useful life cycle of the products.

This paper limits the analysis on developing economies and the use of selected literature based on the recycling of solar PV panels.

This paper is an initial attempt to create an awareness by identifying, analyzing and educating the stakeholders to handle appropriately any EoL scenario of solar PV panels.

This study aims to examine the concept of innovative technologies and identify their impacts on the environmental sustainability of commercial properties in South Africa. This slow adoption is attributed to South Africa’s energy building regulation, SANS 204, which does not promote energy-conscious commercial property development. Furthermore, it was observed that buildings waste significant amounts of energy as electrical appliances are left on when they are not in use, which can be prevented using innovative technologies.

The researchers attempted to evaluate the impact of innovative technologies through an overarching constructivist mixed-method paradigm. The research was conducted using a multi-case study approach on green buildings which had innovative technologies installed. The data collection took the form of online, semi-structured interviews, where thematic analysis was used to identify emergent themes from the qualitative data, and descriptive statistics was used to evaluate the quantitative data.

It was found that implementing innovative technologies to reduce the energy consumption of commercial buildings could achieve energy savings of up to 23%. Moreover, a commercial building’s carbon footprint can be reduced to 152CO2/m2 and further decreased to 142CO2/m2 through the adoption of a Photovoltaics plant. The study further found that innovative technologies improved employee productivity and promoted green learning and practices.

This research demonstrated the positive impact innovative technologies have on energy reduction and the sustainability of commercial properties. Hence, facility managers should engage innovative technologies when planning a commercial development or refurbishment.

Buildings are among the biggest contributors to environmental impacts. To achieve energy-saving and decarbonisation objectives while also improving living conditions, it is imperative to undertake large-scale renovations of existing buildings, which constitute the greater part of building stock and have relatively low energy efficiency. However, building renovation projects poses significant challenges owing to the absence of optimised tools and methods for planning and executing renovation works, coupled with the need for a high degree of interaction with occupants.

This paper describes the development of an automated process, based on building information modelling (BIM) and the principal component analysis method, for overcoming building renovation challenges. The process involves the assessment and simulation of renovation scenarios in terms of duration, cost, effort needed and disruptive potential. The proposed process was tested in three case studies; multi-residence apartment buildings comprising different construction components and systems, located in Greece, France and Denmark, on which six different renovation strategies were evaluated using sensitivity analysis.

The developed tool was successfully able to model and simulate the six renovation scenarios across the three demonstration sites. The ability to simulate various renovation scenarios for a given project can help to strategise renovation interventions based on selected key performance indicators as well as their correlation at two different levels: the building level and the renovated surface area level.

The objectives of this paper are twofold: firstly, to present an automated process, using BIM, for evaluating and comparing renovation scenarios in terms of duration, cost, workers needed and disruptive potential; next, to show the subsequent testing of the process and the analysis of its applicability and behaviour when applied on three live demonstration sites located in three different European countries (France, Greece and Denmark), involving six renovation scenarios.

This paper aims to explore the process of implementing solar photovoltaic (PV) systems in construction to contribute to the understanding of systemic innovation in construction.

The exploratory research presented is based on qualitative data collected in workshops and interviews with 76 construction- and solar-industry actors experienced in solar PV projects. Actor-specific barriers were identified and analysed using an abductive approach.

In light of established definitions of systemic innovation, the process of implementing solar PV systems in construction involves challenges regarding technical and material issues, competencies, and informal and formal institutions. The specificities of this case highlight the necessity of paying attention to details in the process and to develop knowledge of systemic innovation in construction since the industry’s involvement in addressing societal challenges related to the energy transition will require implementing such innovations much more in the future.

New knowledge of solar PV systems as an innovation in professional construction is collected, enabling the adaptation of management strategies for its implementation. This knowledge can also be applied generally to other challenges encountered in highly systemic innovation implementation. Solar industry actors can gain an understanding of solar-specific challenges for the construction industry, challenges for which they must adapt their activities.

The exploration of actor-specific experiences of solar PV projects has resulted in a novel understanding of this specific innovation and its implementation. The findings illustrate a case of a high level of systemic innovation and the need to use a finer-grained scale for classification when studying innovation in construction.

This study aims to exploit the abundance of solar energy resources for socioeconomic development in the semi -arid Northeastern Brazil as a potent adaptation tool to global climate change. It points out a set of conjuncture factors that allow us to foresee a new paradigm of sustainable development for the region by transforming the sun’s radiant energy into electricity through distributed photovoltaic generation. The new paradigm, as presented in this essay, has the transformative potential to free the region from past regional development dogma, which was dependent on the scarce water resource, and the marginal and predatory use of its Caatinga Biome.

The research uses a pre ante design, following the procedures of scenario building, as an adaptation mechanism to climate change in the sector of energy generation and socioeconomic inclusion.

The scenarios of socioeconomic resilience to climate change based on the abundance of solar radiation, rather than the scarcity of water, demonstrates its potential as a global adaptation paradigm to climate change.

The developments proposed are dependent on federal legislation changes, allowing the small producer to be remunerated by the energy produced.

The proposed smart grid photovoltaic generation program increases the country's resiliency to the effect of droughts and climate change.

As proposed, the program allows for the reversion of a pattern of long term poverty in semi-arid Northeast Brazil.

The exploitation of the characteristics of abundance of the semiarid climate, i.e. its very condition of semi-aridity with abundant solar radiation, is itself an advantage factor toward adaption to unforeseen drought events. Extensive previous research has focused on weighting and monitoring drought i.e. the paradigm of scarcity. The interplay between exploiting Northeast Brazil’s abundant factors and climate change adaptation, especially at the small farmer levels constitutes a discovery never before contemplated.

Green energy as a transportation supply trend is irreversible. In this paper, a highway energy supply system (HESS) evolution model is proposed to provide highway transportation vehicles and service facilities with a clean electricity supply and form a new model of a source-grid-load-storage-charge synergistic highway-PV-WT integrated system (HPWIS). This paper aims to improve the flexibility index of highways and increase CO₂ emission reduction of highways.

To maximize the integration potential, a new energy-generation, storage and information-integration station is established with a dynamic master–slave game model. The flexibility index is defined to evaluate the system ability to manage random fluctuations in power generation and load levels. Moreover, CO₂ emission reduction is also quantified. Finally, the Lianhuo Expressway is taken as an example to calculate emission reduction and flexibility.

The results show that through the application of the scheduling strategy to the HPWIS, the flexibility index of the Lianhuo Expressway increased by 29.17%, promoting a corresponding decrease in CO₂ emissions.

This paper proposed a new model to capture the evolution of the HESS, which provides highway transportation vehicles and service facilities with a clean electricity supply and achieves energy transfer aided by an energy storage system, thus forming a new model of a transportation energy system with source-grid-load-storage-charge synergy. An evaluation method is proposed to improve the air quality index through the coordination of new energy generation and environmental conditions, and dynamic configuration and dispatch are achieved with the master–slave game model.