Search results

This paper aims to study the combination of photochromic microcapsules, which use the ultraviolet (UV) rays for colour changing phenomena, and titanium oxide (TiO₂) nanoparticles (NPs), which block the UV rays by their photocatalytic activity in the sunlight on the cotton fabric.

The TiO₂ NPs mixed with photochromic printing paste are used for coating on cotton fabric and further curing is performed in a one-step process. The photochromic pigment printed fabric impregnated in a liquid solution is processed in a two-step process with two variables such as 1% TiO₂ and 2% TiO₂. The characterization of samples was done with a UV transmittance analyser, surface contact angle, antimicrobial test and fabric physical properties.

The UV protection of TiO₂-treated photochromic printed fabric was high and gives the ultraviolet protection factor rating of 2,000 which denotes almost maximum blocking of UV rays. The antibacterial activity of the one-step samples shows the highest 36 mm zone of inhibition (ZOI) against S. aureus (gram-positive) and 32 mm ZOI against E. coli (gram-negative) bacteria. The one-step sample shows the highest static water contact angle of 118.6° representing more hydrophobicity, whereas the untreated fabric is fully wetted (0.4°). In two-step processes, as the concentration of TiO₂ increased, the antibacterial activity, UV blocking and hydrophobicity became better.

This work achieves the multifunctional finishes by using photochromic microcapsules and NPs in a single process as a first attempt. The results inferred that one-step sample has achieved higher values in most of the tests conducted when compared to all other sample.

In this article, a unique concept for a device that conducts photochromic measurement in the reflectance mode together with the methodology described has been patented in the Czech Republic in the author's name. This unique device allows measurements of colorimetric and spectral characteristics of photochromic textiles as photochromic sensors and also as a fatigue tester for the control of color change stability. The measurement of colorimetric and spectral parameters in comparison together with the intensity of UV irradiation allows the dependence of color change on intensity of irradiation to determined, and a scale for individual visual observation to be developed, as well as the risks of UV irradiation to be evaluated.

Photochromic surface coating on textiles may create new fashion opportunities. It also enhances the ultraviolet (UV) protection ability of the coated products. In this study, a spirooxazine dye and a silane that bears a long alkyl chain have been used to produce hybrid photochromic silica coatings on wool fabrics. Four stabilisers are added separately to the photochromic silica coatings to examine their influence on photostability and photochromic behaviour. It is found that the addition of UV stabilisers slightly reduces the photochromic response speed and photochromic absorption. However, the addition of UV stabilisers to the photochromic coating considerably improves the photochromic lifetime. Among the four UV stabilisers studied, the quencher results in the best improvement to photostability with the lowest reduction in photochromic absorption.

Our previous papers (Viková & Vik, 2005) described a unique device, now patented in the Czech Republic in the author's name, for photochromic measurement in a reflectance mode together with a methodology. This device allows photochromic sensors to test the colorimetric and spectral characteristics of photochromic textiles, and also fatigue tests for control of colour change stability. This concept of colorimetric and spectral parameters also finds the dependence of colour change on the intensity of UV irradiation and temperature. In this paper, we would like to describe the dependence of colour change on temperature for the photochromic Photopia AQ Ink system (Blue, Purple and Yellow) produced by Matsui Shikiso Chemical Co.Ltd.

It is known that the reversion of photochromic compounds from coloured to colourless is promoted thermally. The photochromic structure can achieve a lower level of saturated absorbance at higher temperatures when thermo reversible photochromic systems, such as spirooxazines and chromenes, increase the rate of thermal bleaching reaction and thus decrease light stimulated coloration.

Examines the tenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Examines the ninth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

This paper aims to synthesize new screen-printing ink formula based on new derivatives of azo thiadiazol disperse dyes and evaluate their characteristics after being printed on polyester fabric substrates.

New dispersed dyes based on 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were prepared and confirmed by different analyses, infrared (IR), mass and nuclear magnetic resonance (NMR) spectroscopy, and then formulated as colored materials in the screen-printing ink formulations. Printing pastes containing the prepared dyestuffs and other ingredients were used for printing polyester using screen-printing or traditional printing. The characteristics of printed polyester fabric substrates were measured by color measurements such as a*, b*, L*, C*, E, Ho, R% and color strength, as well as light, washing, crock and alkali perspiration fastness, and finally, the depth of penetration was evaluated.

The prepared 1, 3, 4-Thiadiazole derivatives (dyes 1 and 2) were obtained from the reaction of 5,5’-(1,4-phenylene)bis(1,3,4-Thiadiazole-2-amine) with resorcinol and m-toluidine as a coupling component. The suitability of the prepared dyestuffs for silk screen-printing on polyester fabrics has been investigated. The prints obtained from a formulation containing dye 1 possess high color strength as well as good overall fastness properties if compared to those obtained using dye 2.

The method of synthesis of the new dyestuffs and screen-printing ink provides a simple and practical solution to prepare some new heterocyclic disperse azo dyes, and they are formulated in the screen-printing inks for printing on a polyester fabric substrate.

The prepared disperse dyes based on 1,3,4-Thiadiazole derivatives (dyes 1 and 2) could be used in textile printing of polyester on an industrial scale.

Paper aims to preparation of new acid disperse dyes based on thiadiazol derivatives and evaluation of their use as antimicrobial colorants in digital transfer-printing ink formulations for printing onto polyester fabric substrates.

New disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) were prepared and evaluated by different analysis then formulated as colored materials in the ink formulations. The viscosity, dynamic surface tension and particle size distribution of the prepared inks were measured. The printed polyester fabric substrates were tested using a variety of tests, including light fastness, washing, alkali perspiration and Crock fastness, as well as depth of penetration. Density-functional theory (DFT) calculations were carried out at the Becke3-Lee-Yang-parr (B3LYP) level using the 6–311** basis set, and the biological activity of the prepared disperse dyes was investigated.

The obtained results of the physical of the prepared ink revealed that thiadiazol disperse ink is a promising ink formulation for polyester printing and agrees with the quality of the printed polyester fabric. The optimization geometry for molecular structures agreed with the analysis of these compounds. The HOMO/LUMO and energy gap of the studied system were discussed. The molecular docking analysis showed strong interaction with DNA Gyrase and demonstrated to us the high ability of these inks to act as antimicrobial agents.

The prepared inks containing the prepared thiadiazol disperse dye were high-performance and suitable for this type of printing technique, according to the results. The prepared inks resist the growth of microorganisms and thus increase the ink's storage stability.

The prepared disperse dyes based on 1,3,4 - thiadiazol derivative (dyes 1–3) can be a promising colorant in different applications, like some types of paint formulations and as a colorant in printing of different fabric substrates.

The paper aims to provide an overview of the area of smart textiles.

The paper describes and discusses new and developing materials and technologies used in the textile industries.

Significant progress has been achieved in the area of technical textiles. Fibres, yarns, fabrics and other structures with added‐value functionality have been successfully developed for technical and/or high performance end‐uses. The basic building blocks are already in place in the field of smart textiles and clothing.

As progress in science and engineering research advances, and as the gap between designers and scientists narrows, the area of smart clothing is likely to keep on expanding for the foreseeable future. Growth is predicted to occur in two distinct directions: performance‐driven smart clothing and fashion‐driven smart clothing. There are challenges that have to be addressed.

The paper provides information of value to those interested in the future directions of the textile industry.

To discover new photochromic molecules suitable for various applications.

The synthesis of the new photochromic Aniline derivatives was accomplished by reaction of tetracyanoquinodimethane and anilines in polar solvents such as dimethylformamide.

A novel photochromic system had been designed and developed. The synthesis and photochromic properties of three aniline derivatives upon irradiation with ultraviolet light were studies in different solvents. The photochromic and thermochromic properties were affected markedly upon changing the solvent polarity. The new materials gave colourless to deep yellow coloration upon irradiation with ultraviolet, rendering them suitable candidates for optical storage media using the region of 700 nm.

A new photochromic system had been developed via a simple method. The new compounds showed photochromic, thermochromic, and solvatochromic properties making them potential candidates for many applications such as photo sensors, optical data storage, thermochromic sensors and heat sensitive materials.

The photochromic system was novel and hence the photochromic molecules were novel.