Search results

The purpose of the study is to show an improvement in resistance (permeability) and durability (residual strength) of modified wood compared to natural wood.

A relevance way to increase the durability and resistance of wood is processing with polymers. Novosibirsk State Technical University, Novosibirsk State University of Architecture and Civil Engineering (Sibstrin) and the Norilsk State Industrial Institute researched the resistance of elements of mine treatment plants made of wood modified with synthetic polymers. The study was carried out according to V.A. Kucherenko. Modification of such species as birch and pine can significantly increase wood resources by extending its service life and improving its physical and mechanical properties. Latex-organosilicon modifier was used as a modifier.

Latex clogs the capillaries of wood, preventing the penetration of aggressive solutions into it, and potassium methyl silicate interacts with hydrophilic OH groups, increasing the water-repellent properties of the surface of cells and wood capillaries.

The results of long-term and predictive tests of modified wood in aggressive environments of treatment facilities are presented. As a result, diffusion of aggressive media into the wood becomes more difficult and its resistance and durability increase.

In this paper, we examine the comparative advantage of Korea and China while focusing on their technology level. The three digit SITC (Standard International Trade Classification) data is classified by technology level and the revealed comparative advantage (RCA) is derived from 1992-2009 by using UN COMTRADE data. For careful interpretation of the comparative advantage and technology levels, we also examined intra-industry trade and unit values of bilateral Korea-China trade, and semi-conductor industry technology. We found that the revealed comparative advantage has moved from low technology products to high technology products in Korea. China still maintains a comparative advantage in low technology products such as textiles and clothing, but at the same time, China’s high and medium-high technology products have recently gained a comparative advantage. The perception that China only has a comparative advantage for labor intensive products with low technology should be changed based on our analysis. However, China’s advancement in technology should not be overestimated. When comparing the unit value of basic materials of Korea’s and China’s exports, we found that Korea’s export product prices are on average higher than that of China’s, although the gap is reducing. A wider technology gap between Korea and China still exists in the semi-conductor industry, which is one of the most advanced high technology industries throughout the world.

Soybean is potentially a rich source of protein and lipids along with isoflavone. However, the use of soybean is limited due to presence of anti-nutritional factors such as trypsin inhibitor, phytic acid, etc. The present study aimed at evaluation of Harit soya seeds of different treatments such as soaking, dehulling, germination, soaking+roasting and roasting in order to enhance its quality.

Harit soya seeds were utilized were soaked overnight and subjected for dehulling, germination for 3 days as well as roasting followed by drying to obtain fine powder for quality evaluation.

Dehulling and germination produce significant (p < 0.01) increase in protein, crude fiber, total chlorophyll, ascorbic acid, total phenolics, flavonoids and isoflavones while fat was decreased non-significantly. The highest value of 12.4 mg/100g, 5.3 mgGAE/g and 6.6 mg/g for ascorbic acid, total phenolics and isoflavones was found in germinated seeds. Also, the effect of soaking, roasting and their combination lead to significant decrease in the functional properties of the seeds. Anti-nutritional factors were significantly (p < 0.01) reduced in all forms of treated seeds while pepsin and trysin digestibility was enhanced during soaking, dehulling and germination with maximum value of 72.6 and 25.8%, respectively in germinated seeds.

Improvement in quality of evergreen variety of soybean using cost effective traditional methods

The export competitiveness has only calculated on only two aspects either comparatively advantageous or comparatively disadvantageous products for India or China. There is not any thorough study that has been undertaken for Indian manufacturing sector at a segregated level along with that of China. So, in the light of these shortcomings, the purpose of this study is to analyse the dynamics of export competitiveness of indian manufacturing sector vis-à-vis its emerging counterpart, china in the global market.

A modified revealed comparative advantage index has been used in two different phases of 2001–08 and 2010–18 to find the dynamic pattern of manufacturing exports of India and China in the world market.

The study revealed that India has shown a positive response in increasing its competitive positioned products from low-technology to medium-technology products during the study period. There has been a decline in the competitive positioned products of China and simultaneously China’s threatened product lines have shown an immense increment over the years. Moreover, Indian exports are concentrated to few low-technology and resource-intensive products, that share more than 50% of total exported value for its manufacturing in the global market, whereas, China is much diversified and the exported value is more scattered over its manufactured items.

The study does not include the factors that impacted the export competitiveness of the sample economies and thus adds a limitation to this study.

As there is very limited research on dynamics of export competitiveness of Indian manufacturing exports at harmonised system 6-digit level with China, this study fulfils the gap.

Egyptian cotton straw powder was acid hydrolized in presence of coal tar phenols fraction (b.r. 170–185°C) to give the phenols‐furfural resin. Homopolyepoxy resin was prepared via condensation of epichlorohydrin with phenols‐furfural resin. Similarly copolyepoxy resin was also prepared from epichlorohyhdrin, phenols‐furfural resin and prepared bisphenol A based on coal tar phenols fraction. A study of curing these epoxy resins at 170–185°C with phthalic or maleic anhydride also curing at room temperature with amine was carried out. Also the effect of the addition of kaolin as a filler was investigated to find the optimum condition which allow the cured resin to act as wood adhesive. The obtained results were comparable with those of some commercial adhesives.

SYNTHETIC AND OTHER PLASTICS CELLULOSE and rubber are made of long chain molecules already built up for us by nature, but in recent years we have learned to make synthetic polymers with physical characteristics not unlike those of natural polymers; the variety of such synthetic polymers is already somewhat bewildering, and it is quite certain that chemists have only made a beginning in an exploration that promises to be as successful as anything achieved by the classical organic chemists of the nine‐teenth century. Like many other branches of knowledge the subject is easier to understand if not treated in the chronological order in which the discoveries have been made. We will therefore begin with a description of the vinyl polymers rather than the older and better‐known condensation resins.

The primary alcohol, ethanol, and its effects in man have been of considerable interest since ancient times. In recent years, for social, scientific, medical and legal reasons, even greater attention has been focused on the problems of alcohol drinking, its metabolism, pathology, and effects on physical and mental behaviour.

The liquid extract obtained from the natural cashew nutshell is rich in phenolic substances which are derived from anacardic acid C6H3(OH) (CO2H) (C15H31‐n), where n may have values of 0, 2, 4 or 6 and represents various degrees of unsaturation in the aliphatic C15 side‐chain. Industrial decarboxylation of this material affords cardanol C6H4(OH) (C15H31‐n) plus other substituted phenols and polymeric residues. Tyman et al. (197, 198) have studied the analysis of all these products using GC, molecular distillation, TLC and mass spectrometry. After hydrogenation and the formation of the corresponding methyl esters, the products were analysed by GC using glass columns (5ft × 3/16in) packed with acid washed and silanized Diatomite as support material and which was coated with non‐polar stationary phases such as SE30, SE25 or APL, or semi‐polar phases such as 0V17, Dexil 300 or PEGA. Alternatively, the samples were subjected to an acetylation procedure prior to GC examination on columns containing Dexil 300, SE30 or SE52. The GC equipment consisted of a Pye‐Unicam model 104 instrument operated with nitrogen carrier gas (flow rate 45cm3 min−1) and equipped with FID.

PART V Organic chemistry textbooks. Twenty textbooks of organic chemistry are considered in this part of the review and the organic sections of the syllabuses of three GCE Boards are analysed.

John Newton, Texaco Ltd, gives Chemrecon delegates an A‐to‐Z insight into lube‐oil blending, application and environmentally safe usage