Search results

This study aims to manufacture cotton fabric with thermal regulation performance by using the composite phase change material (CPCM) prepared by coating paraffin doped with expanded graphite (EG), and the thermal effect of the fabric material was evaluated and characterized.

EG/paraffin CPCM with shape stability and enhanced thermal conductivity were prepared by the impregnation method and then finished on the surface of cotton fabric with coating technology. The microstructure, crystal structure, chemical composition, latent heat property and thermal conductivity were analyzed by scanning electron microscope, x-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimeter and thermal constant analyzer. The photo-thermal effect of the coated fabric was studied by a thermal infrared imager.

CPCM prepared with a mass ratio of EG to paraffin of 1:8 showed excellent shape stability and low paraffin leakage rate. The latent heat of the CPCM was 51.6201 J/g and the thermal conductivity coefficient was increased by 11.4 times compared with the mixed paraffin. After the CPCM was coated on the surface of the cotton fabric, the light-to-heat conversion rate of the C-EG/PA3 sample was improved by 86.32% compared with the original fabric. In addition, the coated fabric showed excellent thermal stability and heat storage performance in the thermal cycling test.

EG can improve the shape stability and thermal conductivity of paraffin but will reduce the latent heat energy.

The method developed provided a simple and practical solution to improving the thermal regulation performance of fabrics.

Combining paraffin wax with fabrics in a composite way is innovative and has certain applicability in improving the thermal properties of fabrics.

Fabrics with photothermal conversion functions were developed based on the introduction of shape stable composite phase change materials (CPCMs).

Acidified single-walled carbon nanotubes (SWCNTs) were selected as support material to prepare CPCMs with n-octadecane to improve the thermal conductivity and shape stability. The CPCMs were finished onto the surface of cotton fabric through the coating and screen-printing method. The chemical properties of CPCMs were characterized by Fourier transform infrared spectrometer, XRD and differential scanning calorimetry (DSC). The shape stability and thermal conductivity were also evaluated. In addition, the photothermal conversion and temperature-regulating performance of the finished fabrics were analyzed.

When the addition amount of acidified SWCNTs are 14% to the mass of n-octadecane, the best shape stability of CPCMs is obtained. DSC analysis shows that the latent heat energy storage of CPCMs is as high as 183.1 J/g. The thermal conductivity is increased by 84.4% compared with that of n-octadecane. The temperature-regulating fabrics coated with CPCMs have good photothermal conversion properties.

CPCMs with high latent heat properties are applied to the fabric surface through screen printing technology, which not only gives the fabric the photothermal conversion performance but also reflects the design of personalized patterns.

CPCMs and polydimethylsiloxane (PDMS) are mixed to make printing paste and printed cotton fabric with temperature-regulating functional is developed.

SWCNTs and n-octadecane are composited to prepare CPCMs with excellent thermal properties, which can be mixed with PDMS to make printing paste without adding other pastes. The fabric is screen-printed to obtain a personalized pattern and can be given a thermoregulatory function.

Reducing discrepancy between energy demand and supply has been a controversial issue among researchers. Thermal energy storage is a technique to decrease this difference to increase the thermal efficiency of systems. Latent heat thermal energy storage has interested many researchers over the past few decades because of its high thermal energy density and constant operating temperature. The purpose of this paper is to provide a numerical study of the solidification process in a triplex tube heat exchanger containing phase change material (PCM) RT82.

A two-dimensional transient model was generated using finite volume method and regarding enthalpy-porosity technique. After that, a detailed and systematic approach has been presented to modify longitudinal fins’ configuration to enhance heat transfer rate in PCMs and reducing solidification time. The numerical results of this study have been validated by reference experimental results.

The ultimate model reduced solidification time up to 21.1 per cent of the Reference model which is a substantial improvement. Moreover, after testing different arrangements of rectangular fins and studying the flow pattern of liquid PCM during solidification, two general criteria was introduced so that engineers can reach the highest rate of heat transfer for a specified value of total surface area of fins. Finally, the effect of considering natural convection during solidification was studied, and the results showed that disregarding natural convection slows down the solidification process remarkably in comparison with experimental results and in fact, this assumption generates non-real estimation of solidification process.

The arrangement of the fins to have the best possible solidification time is the novelty in this paper.

The purpose of this paper is to investigate thermoregulation properties of different composite phase change materials (PCMs), which could be used in the high temperature environmental conditions to protect human body against the extra heat flow.

Three kinds of composite PCM samples were prepared using the selected pure PCMs, including n-hexadecane, n-octadecane and n-eicosane. The DSC experiment was performed to get the samples’ phase change temperature range and enthalpy. The simulated high temperature experiments were performed using human arms in three different high temperature conditions (40°C, 45°C, 50°C), and the skin temperature variation curves varying with time were obtained. Then a comprehensive index TGP was introduced from the curves and calculated to evaluate the thermoregulation properties of different composite PCM samples comprehensively.

Results show that the composite PCM samples could provide much help to the high temperature human body. It could decrease the skin temperature quickly in a short time and it will not cause the over-cooling phenomenon. Comparing with other two composite PCM samples, the thermoregulation properties of the n-hexadecane and n-eicosane composite PCM is the best.

Using the n-hexadecane and n-eicosane composite PCM may provide people with better protection against the high temperature conditions, which is significative for the manufacture of functional thermoregulating textiles, garments or equipments.

The purpose of this paper is to study thermal performance of metal foam/phase change materials composite under the influence of the enclosure aspect ratios (ratio of enclosure height: length). In this study, a compound metal foam/phase change material (PCM), which has been proved to be one of the most promising approaches for thermal conductivity promotion on PCMs, was used.

The PCM is considered initially at its melting temperature. The enclosure for all the cases has a constant volume with various aspect ratios. The left side of the enclosure is suddenly exposed to a thermal source having a constant heat flux, while the other three surfaces are kept thermally insulated. A two-dimensional numerical model considering the non-equilibrium thermal factor, non-Darcy effect and local natural convection was proposed. The coupling between velocity and pressure is solved using the SIMPLEC, and the Rhie and Chow interpolation is used to avoid the checker-board solutions for the pressure.

The effects of foam porosity and aspect ratio of the enclosure on the PCM’s melting time were investigated. The results indicated that enclosure aspect ratio plays a fundamental role in phase change of copper foam/PCM composites. For higher porosities, enclosures with bigger aspect ratios proved to led to optimal melting time. Besides, the best enclosure aspect ratio and foam porosity for a fixed-volume enclosure to have the shortest melting time are 2.1 and 91.66 per cent, respectively. However, for a specific amount of PCM inside a variable volume enclosure, the optimal melting time was for foam with ε = 95 per cent. The achieved results prove the great importance of selection of aspect ratio to benefit both conduction and convection heat transfer simultaneously.

The area of energy storage systems is original.

This paper aims to establish a lattice Boltzmann (LB) method for solid-liquid phase transition (SLPT) from the pore scale to the representative elementary volume (REV) scale. By applying this method, detailed information about heat transfer and phase change processes within the pores can be obtained, while also enabling the calculation of larger-scale SLPT problems, such as shell-and-tube phase change heat storage systems.

Three-dimensional (3D) pore-scale enthalpy-based LB model is developed. The computational input parameters at the REV scale are derived from calculations at the pore scale, ensuring consistency between the two scales. The approaches to reconstruct the 3D porous structure and determine the REV of metal foam were discussed. The implementation of conjugate heat transfer between the solid matrix and the solid−liquid phase change material (SLPCM) for the proposed model is developed. A simple REV-scale LB model under the local thermal nonequilibrium condition is presented. The method of bridging the gap between the pore-scale and REV-scale enthalpy-based LB models by the REV is given.

This coupled method facilitates detailed simulations of flow, heat transfer and phase change within pores. The approach holds promise for multiscale calculations in latent heat storage devices with porous structures. The SLPT of the heat sinks for electronic device thermal control was simulated as a case, demonstrating the efficiency of the present models in designing and optimizing SLPT devices.

A coupled pore-scale and REV-scale LB method as a numerical tool for investigating phase change in porous materials was developed. This innovative approach allows for the capture of details within pores while addressing computations over a large domain. The LB method for simulating SLPT from the pore scale to the REV scale was given. The proposed method addresses the conjugate heat transfer between the SLPCM and the solid matrix in the enthalpy-based LB model.

The paper aims to provide an overview of the area of smart textiles.

The paper describes and discusses new and developing materials and technologies used in the textile industries.

Significant progress has been achieved in the area of technical textiles. Fibres, yarns, fabrics and other structures with added‐value functionality have been successfully developed for technical and/or high performance end‐uses. The basic building blocks are already in place in the field of smart textiles and clothing.

As progress in science and engineering research advances, and as the gap between designers and scientists narrows, the area of smart clothing is likely to keep on expanding for the foreseeable future. Growth is predicted to occur in two distinct directions: performance‐driven smart clothing and fashion‐driven smart clothing. There are challenges that have to be addressed.

The paper provides information of value to those interested in the future directions of the textile industry.

The purpose of this study is to investigate the applicability of volume average which is extensively used for analyzing the heat and fluid flow (both for single-phase and solid/liquid-phase change) in a closed cell porous medium numerically.

Heat conduction equations for the solid frame and fluid (or phase change material) are solved for pore scale and volume average approaches. The study mainly focuses on the effect of porosity and the number of porous media unit cell on the agreement between the results of the pore scale and volume average approaches.

It is observed for the lowest porosity values such as 0.3 and the number of porous media unit cell as 4 in heat transfer direction, the results between two approaches may be questionable for the single-phase fluid. By increasing the number of porous media unit cell in heat transfer direction, the agreement between two approaches becomes better. In general, for high porosity values (such as 0.9) the agreement between the results of two approaches is in the acceptable range both for single-phase and solid/liquid-phase change. Two charts on the applicability of volume average method for single-phase and solid/liquid-phase change are presented.

The authors’ literature survey shows that it is the first time the applicability of volume average which is extensively used for analyzing the heat and fluid flow in a closed cell porous medium is investigated numerically.

The present study provides a comprehensive review of the advancements in five active heating modes for cold-proof clothing as of 2021. It aims to evaluate the current state of research for each heating mode and identify their limitations. Further, the study provides insights into the optimization of intelligent temperature control algorithms and design considerations for intelligent cold-proof clothing.

This article presents a classification of active heating systems based on five different heating principles: electric heating system, solar heating system, phase-change material (PCM) heating system, chemical heating system and fluid/air heating system. The systems are analyzed and evaluated in terms of heating principle, research advancement, scientific challenges and application potential in the field of cold-proof clothing.

The rational utilization of active heating modes enhances the thermal efficiency of cold-proof clothing, resulting in enhanced cold-resistance and reduced volume and weight. Despite progress in the development of the five prevalent heating modes, particularly with regard to the improvement and advancement of heating materials, the current integration of heating systems with cold-proof clothing is limited to the torso and limbs, lacking consideration of the thermal physiological requirements of the human body. Additionally, the heating modes of each system tend to be uniform and lack differentiation to meet the varying cold protection needs of various body parts.

The effective application of multiple heating modes helps the human body to maintain a constant body temperature and thermal equilibrium in a cold environment. The research of heating mode is the basis for realizing the temperature control of cold-proof clothing and provides an effective guarantee for the future development of the intelligent algorithms for temperature control of non-uniform heating of body segments.

The integration of multiple heating modes ensures the maintenance of a constant body temperature and thermal balance for the wearer in cold environments. The research of heating modes forms the foundation for the temperature regulation of cold-proof clothing and lays the groundwork for the development of intelligent algorithms for non-uniform heating control of different body segments.

The present article systematically reviews five active heating modes suitable for use in cold-proof clothing and offers guidance for the selection of heating systems in future smart cold-proof clothing. Furthermore, the findings of this research provide a basis for future research on non-uniform heating modes that are aligned with the thermal physiological needs of the human body, thus contributing to the development of cold-proof clothing that is better suited to meet the thermal needs of the human body.

This paper aims to investigate melting heat transfer of a non-Newtonian phase change material (PCM) in a cylindrical enclosure-space between two tubes using a deformed mesh method.

Metal foam porous layers support the inner and outer walls of the enclosure. The porous layers and clear space of the enclosure are filled with PCM. The natural convection effects during the phase change are taken into account, and the governing equations for the molten region and solid region of the enclosure are introduced. The governing equations are transformed into non-dimensional form and then solved using finite element method. The results are compared with the literary works and found in good agreement. The non-Newtonian effects on the phase change heat transfer and melting front are studied.

The results show that the increase of non-Newtonian effects (the decrease of the power-law index) enhances the heat melting process in the cavity at the moderate times of phase change heat transfer. The temperature gradients in porous metal foam over the hot wall are small, and hence, the porous layer notably increases the melting rate. When the melting front reaches the cold porous layer, strong non-linear behaviors of the melting front can be observed.

The phase change heat transfer of non-Newtonian fluid in a cylindrical enclosure partially filled with metal foams is addressed for the first time.