Search results

This study aims to evaluate the melting process of the phase-change RT-35 material in a shell and tube heat exchanger saturated with a porous medium. Titanium porous media with isotropic and inhomogeneous structures are studied. The considered tubes in the shell and tube exchanger are made of copper with specific thicknesses. The phase-change material has a non-Newtonian behavior and follows the endorsed Carreau–Yasuda Model.

The enthalpy–porosity method is used for modeling of the melting process. The governing equations were transferred to their dimensionless forms. Finally, the equations are solved by applying the Galerkin finite element method.

The findings for different values of the relative permeability (K*) and permeability deviation angle (λ) are represented in the forms of charts, streamlines and constant temperature contours. The considerable effects of the relative permeability (K*) and deviation angle (λ) on the flow line patterns of the melting phase-change material are some of the significant achievements of this works.

This study was conducted using data from relevant research articles provided by reputable academic sources. The data included in this manuscript have not been published previously and are not under consideration by any other journal.

This study aims to capture the heat transfer and entropy generation characteristics of temperature-dependent nano-encapsulated phase change material (NEPCM) slurry in a hybrid wavy microchannel. In addition, the effect of substrate material combined with NEPCM slurry on conjugate heat transfer condition is captured for different microchannel heat sinks.

A novel “hybrid wavy microchannel” is proposed to enhance the overall heat transfer and reduce the pressure drop by combining wavy and raccoon geometry. NEPCM–water slurry is implied in the hybrid wavy, conventional wavy and raccoon microchannel. A user-defined function (UDF) is used to observe the effect of phase-change of paraffin material in thermophysical properties of NEPCM–water nanofluid. All three (hybrid, wavy, raccoon) microchannels are engraved on a rectangular substrate of 1.8 mm width (ωs) and 30 mm length (L), respectively. For hybrid, wavy and raccoon microchannel, waviness (γ) of 0.067 is selected for the investigation.

The result shows that NEPCM particle presence reduces the fluid domain temperature. The thermal performance of proposed Heat sink 2 is found better than the Heat sink 1. The effect of the geometrical modification, wall thermal conductivity, different volumetric concentrations of nanoparticles (ϕ ∼ 1 – 5%) and Reynolds number (Re ∼ 100 – 500) on thermodynamic irreversibility is also observed. Additionally, the effect of thermal and frictional entropy generation is reduced with a combination of NEPCM slurry and higher conductive material for all heat sinks.

A combination of NEPCM slurry with laminar flow microchannel cooling system emerged as a better alternative over other cooling techniques for higher power density devices such as microprocessors, electronic radar systems, aerospace applications, semiconductors, power electronics in modern electronic vehicles, high power lasers, etc.

The phase-change process of the NEPCM slurry is tracked under conjugate heat transfer in a hybrid wavy microchannel. Furthermore, the phase-change process of NEPCM slurry is captured with different heat sink materials (SS316, silicon and copper) under conjugate heat transfer situation for different heat sinks and concentrations (ϕ ∼ 1–5) of NEPCM.

The purpose of this paper is to investigate energy performance of thermal insulation modified by phase change materials (PCM). Special attention was paid to the problem of proper performance assessment of such components by computational techniques and methods of its evaluation.

Analysis was conducted on the basis of the results obtained using the dynamic building simulation technique performed by ESP-r software. Two cases of insulation components enhanced by a layer: characterised by increased latent heat capacity were analysed and compared. Results were investigated in terms of thermal comfort and energy efficiency, using evaluation methods from literature and new, original indicators proposed by authors.

The analysis revealed that performance of insulation enhanced by PCM is very dynamic and highly sensitive to changeable weather conditions. Thus, there is a strong need for the development of the assessment methods and guidelines for the performance of such components with changeable physical properties.

The methodology and the results reported in this paper could be used as a guideline for further parametric studies and optimisation tasks. Further development of phase change insulation can substantially change the existing approach to the building energy performance.

The paper introduces a new approach of the assessment of insulation components modified by PCM and highlights the dynamic characteristics of its performance.

Material jetting approximates composite material properties through deposition of base materials in a dithered pattern. This microscale, voxel-based patterning leads to macroscale property changes, which must be understood to appropriately design for this additive manufacturing (AM) process. This paper aims to identify impacts on these composites’ viscoelastic properties due to changes in base material composition and distribution caused by incomplete dithering in small features.

Dynamic mechanical analysis (DMA) is used to measure viscoelastic properties of two base PolyJet materials and seven “digital materials”. This establishes the material design space enabled by voxel-by-voxel control. Specimens of decreasing width are tested to explore effects of feature width on dithering’s ability to approximate macroscale material properties; observed changes are correlated to multi-material distribution via an analysis of ingoing layers.

DMA shows storage and loss moduli of preset composites trending toward the iso-strain boundary as composition changes. An added iso-stress boundary defines the property space achievable with voxel-by-voxel control. Digital materials exhibit statistically significant changes in material properties when specimen width is under 2 mm. A quantified change in same-material droplet groupings in each composite’s voxel pattern shows that dithering requires a certain geometric size to accurately approximate macroscale properties.

This paper offers the first quantification of viscoelastic properties for digital materials with respect to material composition and identification of the composite design space enabled through voxel-by-voxel control. Additionally, it identifies a significant shift in material properties with respect to feature width due to dithering pattern changes. This establishes critical design for AM guidelines for engineers designing with digital materials.

This study aims to review the recent advancements in high entropy alloys (HEAs) called high entropy materials, including high entropy superalloys which are current potential alternatives to nickel superalloys for gas turbine applications. Understandings of the laser surface modification techniques of the HEA are discussed whilst future recommendations and remedies to manufacturing challenges via laser are outlined.

Materials used for high-pressure gas turbine engine applications must be able to withstand severe environmentally induced degradation, mechanical, thermal loads and general extreme conditions caused by hot corrosive gases, high-temperature oxidation and stress. Over the years, Nickel-based superalloys with elevated temperature rupture and creep resistance, excellent lifetime expectancy and solution strengthening L12 and γ´ precipitate used for turbine engine applications. However, the superalloy’s density, low creep strength, poor thermal conductivity, difficulty in machining and low fatigue resistance demands the innovation of new advanced materials.

HEAs is one of the most frequently investigated advanced materials, attributed to their configurational complexity and properties reported to exceed conventional materials. Thus, owing to their characteristic feature of the high entropy effect, several other materials have emerged to become potential solutions for several functional and structural applications in the aerospace industry. In a previous study, research contributions show that defects are associated with conventional manufacturing processes of HEAs; therefore, this study investigates new advances in the laser-based manufacturing and surface modification techniques of HEA.

The AlxCoCrCuFeNi HEA system, particularly the Al0.5CoCrCuFeNi HEA has been extensively studied, attributed to its mechanical and physical properties exceeding that of pure metals for aerospace turbine engine applications and the advances in the fabrication and surface modification processes of the alloy was outlined to show the latest developments focusing only on laser-based manufacturing processing due to its many advantages.

It is evident that high entropy materials are a potential innovative alternative to conventional superalloys for turbine engine applications via laser additive manufacturing.

The purpose of this paper is to demonstrate how anomalous diffusion behaviors can be manifest in physically realizable phase change systems.

In the presence of heterogeneity the exponent in the diffusion time scale can become anomalous, exhibiting values that differ from the expected value of 1/2. Here the author investigates, through directed numerical simulation, the two-dimensional melting of a phase change material (PCM) contained in a pattern of cavities separated by a non-PCM matrix. Under normal circumstances we would expect that the progress of melting F(t) would exhibit the normal diffusion time exponent, i.e., F∼t1/2. The author’s intention is to investigate what features of the PCM cavity pattern might induce anomalous phase change, where the progress of melting has a time exponent different from n=1/2.

When the PCM cavity pattern has an internal length scale, i.e., when there is a sub-domain pattern which, when reproduced, gives us the full domain pattern, the direct simulation recovers the normal ∼t1/2 phase change behavior. When, however, there is no internal length scale, e.g., the pattern is a truncated fractal, an anomalous super diffusive behavior results with melting going as t n; n > 1/2. By studying a range of related fractal patterns, the author is able to relate the observed sub-diffusive exponent to the cavity pattern’s fractal dimension. The author also shows, how the observed behavior can be modeled with a non-local fractional diffusion treatment and how sub-diffusion phase change behavior (F∼t n; n < 1/2) results when the phase change nature of the materials in the cavity and matrix are inverted.

Although the results clearly demonstrate under what circumstances anomalous phase change behavior can be practically produced, the question of an exact theoretical relationship between the cavity pattern geometry and the observed anomalous time exponent is not known.

The clear role of the influence of heterogeneity on heat flow behavior is illustrated. Suggesting that modeling heat and fluid flow in heterogeneous systems requires careful consideration.

The novel direct simulation of melting in a two-dimensional PCM cavity pattern provides a clear illustration of anomalous behavior in a classic heat and fluid flow system and by extension provides motivation to continue the numerical investigation of anomalous and non-local behaviors and fractional calculus tools.

This study aims to explore the infrared imaging effect of fabrics coated with phase change material microcapsules (PCM-MCs), which are prepared by the initiation of ultraviolet (UV) light.

PCM-MCs were prepared by UV polymerization using paraffin (PA) as core material, polymethyl methacrylate as wall material and ferric chloride as photoinitiator. The effects of emulsifier dosage and emulsification temperature on the properties of PA emulsion were investigated. Scanning electron microscopy, particle size analysis, infrared spectroscopy, differential scanning calorimetry and infrared imaging test were used to characterize the properties of microcapsules.

The PCM-MCs with good morphology and particle size were prepared with 25 cm of the distance between light source and the liquid. The average particle size was 1.066 µm and the latent heat of phase transition was 19.96 J/g. After 100 accelerated thermal cycles, the latent heat only decreased by 1.8%. It had good heat storage stability and thermal stability. The fabric coated by the microcapsules exhibited a variable temperature hysteresis effect when placed in the sun, and presented a color close to the infrared images of the human palm under the external environment temperature close to the human body temperature.

The PCM-MCs prepared based on UV light initiation showed good thermal properties and its coated fabrics had an infrared decoy effect below the temperature of the human body.

This study explored the application of microcapsules in textiles.

The microcapsules had a certain application potential in infrared decoy effect.

This paper aims to study the synergistic effect of graphene sponge on the thermal properties and shape stability of composite phase change material (PCM).

Graphene oxide sponge is first prepared from an aqueous solution of graphene oxide by freeze-drying method. The oxidized graphene sponge is reduced by hydrazine hydrate. Finally, use vacuum impregnation method to introduce paraffin into graphene sponge to prepare composite PCM.

Graphene sponge is used to improve the shape stability of paraffin wax and improves the thermal conductivity and latent heat of the composite PCM. The thermal conductivity increases by 200 per cent and the composite PCM has excellent reliability in 100 melt-freezing cycles.

A simple way for fabricating composite PCM with high thermal conductivity and latent heat which has the potential to be used as thermal storage materials without container encapsulation has been developed by using graphene sponge and paraffin.

The materials and preparation methods with special structure and properties in this paper provide a new idea for the research of PCM, which can be widely used in the fields of energy conversion and storage.

The purpose of this study is to analyze heat transfer for solid–liquid phase change in two inclined cavities assisted with open cell and closed cell porous structures for enhancement of heat transfer and compare them.

The heat transfer analysis is done numerically. The set of conservation equations for mass, momentum and energy for phase change material (PCM) and conduction heat transfer equation for metal frame are solved. Furthermore, temperature and solid–liquid fraction distributions for a cavity filled only with PCM are also obtained for comparison. The porosity is 0.9 for both porous structures. Rayleigh number and inclination angle change from 1 to 10⁸, and from −90° to 90°, respectively.

The present study reveals that the use of closed cell structures not only can make phase change faster than open cell structure (except for Ra = 10⁸ and = 90°) but also provide more stable process. The use of a closed cell porous structure in a cavity with PCM can reduce melting period up to 55% more than a cavity with an open cell porous structure. The rate of this additional enhancement depends on Rayleigh number and inclination angle.

To the best of the authors’ knowledge, this is the first time that the comparison between closed cell and open cell porous structures for heat transfer enhancement in a solid/liquid phase change process is reported. Authors believe that the present study will lead more attentions on the use of closed cell porous structures.

Mathematical and numerical models are developed to study the melting of a Phase Change Material (PCM) inside a 2D cavity. The bottom of the cell is heated at constant and uniform temperature or heat flux, assuming that the rest of the cavity is completely adiabatic. The paper used suitable numerical methods to follow the interface temporal evolution with a good accuracy. The purpose of this paper is to show how the evolution of the latent energy absorbed to melt the PCM depends on the temperature imposed on the lower wall of the cavity.

The problem is written with non-homogeneous boundary conditions. Momentum and energy equations are numerically solved in space by a spectral collocation method especially oriented to this situation. A Crank-Nicolson scheme permits the resolution in time.

The results clearly show the evolution of multicellular regime during the process of fusion and the kinetics of phase change depends on the boundary condition imposed on the bottom cell wall. Thus the charge and discharge processes in energy storage cells can be controlled by varying the temperature in the cell PCM. Substantial modifications of the thermal convective heat and mass transfer are highlighted during the transient regime. This model is particularly suitable to follow with a good accuracy the evolution of the solid/liquid interface in the process of storage/release energy.

The time-dependent physical properties that induce non-linear coupled unsteady terms in Navier-Stokes and energy equations are not taken into account in the present model. The present model is actually extended to these coupled situations. This problem requires smoother geometries. One can try to palliate this disadvantage by constructing smoother approximations of non-smooth geometries. The augmentation of polynomials developments orders increases strongly the computing time. When the external heat flux or temperature imposed at the PCM is much greater than the temperature of the PCM fusion, one must choose carefully some data to assume the algorithms convergence.

Among the areas where this work can be used, are: buildings where the PCM are used in insulation and passive cooling; thermal energy storage, the PCM stores energy by changing phase, solid to liquid (fusion); cooling and transport of foodstuffs or pharmaceutical or medical sensitive products, the PCM is used in the food industry, pharmaceutical and medical, to minimize temperature variations of food, drug or sensitive materials; and the textile industry, PCM materials in the textile industry are used in microcapsules placed inside textile fibres. The PCM intervene to regulate heat transfer between the body and the outside.

The paper's originality is reflected in the precision of its results, due to the use of a high-accuracy numerical approximation based on collocation spectral methods, and the choice of Chebyshev polynomials basis in both axial and radial directions.