Search results

Work-life flexibility policies (e.g., flextime, telework, part-time, right-to-disconnect, and leaves) are increasingly important to employers as productivity and well-being strategies. However, policies have not lived up to their potential. In this chapter, the authors argue for increased research attention to implementation and work-life intersectionality considerations influencing effectiveness. Drawing on a typology that conceptualizes flexibility policies as offering employees control across five dimensions of the work role boundary (temporal, spatial, size, permeability, and continuity), the authors develop a model identifying the multilevel moderators and mechanisms of boundary control shaping relationships between using flexibility and work and home performance. Next, the authors review this model with an intersectional lens. The authors direct scholars’ attention to growing workforce diversity and increased variation in flexibility policy experiences, particularly for individuals with higher work-life intersectionality, which is defined as having multiple intersecting identities (e.g., gender, caregiving, and race), that are stigmatized, and link to having less access to and/or benefits from societal resources to support managing the work-life interface in a social context. Such an intersectional focus would address the important need to shift work-life and flexibility research from variable to person-centered approaches. The authors identify six research considerations on work-life intersectionality in order to illuminate how traditionally assumed work-life relationships need to be revisited to address growing variation in: access, needs, and preferences for work-life flexibility; work and nonwork experiences; and benefits from using flexibility policies. The authors hope that this chapter will spur a conversation on how the work-life interface and flexibility policy processes and outcomes may increasingly differ for individuals with higher work-life intersectionality compared to those with lower work-life intersectionality in the context of organizational and social systems that may perpetuate growing work-life and job inequality.

This study aims to analyse the non-linear losses of a porous media (stack) composed by parallel plates and inserted in a resonator tube in oscillatory flows by proposing numerical correlations between pressure gradient and velocity.

The numerical correlations origin from computational fluid dynamics simulations, conducted at the microscopic scale, in which three fluid channels representing the porous media are taken into account. More specifically, for a specific frequency and stack porosity, the oscillating pressure input is varied, and the velocity and the pressure-drop are post-processed in the frequency domain (Fast Fourier Transform analysis).

It emerges that the viscous component of pressure drop follows a quadratic trend with respect to velocity inside the stack, while the inertial component is linear also at high-velocity regimes. Furthermore, the non-linear coefficient b of the correlation ax + bx² (related to the Forchheimer coefficient) is discovered to be dependent on frequency. The largest value of the b is found at low frequencies as the fluid particle displacement is comparable to the stack length. Furthermore, the lower the porosity the higher the Forchheimer term because the velocity gradients at the stack geometrical discontinuities are more pronounced.

The main novelty of this work is that, for the first time, non-linear losses of a parallel plate stack are investigated from a macroscopic point of view and summarised into a non-linear correlation, similar to the steady-state and well-known Darcy–Forchheimer law. The main difference is that it considers the frequency dependence of both Darcy and Forchheimer terms. The results can be used to enhance the analysis and design of thermoacoustic devices, which use the kind of stacks studied in the present work.

Crop suitability analysis is vital for identifying a piece of land’s potential for sustainable crop production and aids in the formulation of an effective agricultural management plan. This study aims to conduct crop suitability analysis of prominent Kharif (rice and maize) and Rabi (potato and wheat) crops in Sirajganj district, a flood-prone area of Bangladesh, and recommend a suitable cropping pattern to mitigate the detrimental effects of flooding.

Various factors such as soil drainage, soil depth, soil moisture, soil texture, soil permeability, soil pH, erosion hazard, nutrient status and flooding risk were considered for this study. For all four crops, the weights of each factor were determined using the analytical hierarchy process approach, and the scores of each subfactor were assigned on the basis of favorable circumstances of crop cultivation. Using the weighted overlay analysis in the ArcGIS 10.3 environment, the crop suitability maps were generated and were divided into four suitable classes. Geographic information system integration of crop suitability for all the crops determined the suitable cropping pattern of the study area in Kharif and Rabi seasons.

A vast portion of the study area covering 64.80% of the total land is suitable for cultivating either rice or maize in Kharif season followed by either potato or wheat in Rabi season. Other suitable cropping pattern for Kharif and Rabi seasons found in the study area are rice-wheat, rice-wheat/potato, rice/maize-wheat and rice/maize-potato, which covers a little portion of the study area.

This research validates the suitable location of crop cultivation on the basis of flooding occurrences in the locality.

This study investigates the role of collaborative spaces as organizational support for internal innovation through cross-functional teams and for open innovation with external stakeholders. In particular, the study focuses on collaborative spaces as tools for multiplex (i.e., simultaneous internal and external boundary management in innovation projects).

The authors conducted a qualitative study in a multi-divisional organization that set up in its headquarters a collaborative space for collaborative product development. Data were collected through semi-structured interviews and participant observations.

Findings highlight that the relation between expectations and experiences about the collaborative space impact on employees' ability to perform boundary work inside and outside the organization. In addition to the collaborative space's affording role for expectations about hands-on collaborative innovation (space as laboratory), the study also highlights a set of collaboration constraints. These latter are generated by perceived boundary configurations (i.e. degree of boundary permeability and infrastructure in internal and external collaborations) and by discrepancies between expectations (space as laboratory) and actual collaboration experiences in the space (i.e. space as maze, cloister, showcase and silo). We show that space-generated constraints slow down internal and external boundary work for innovation and generate a trade-off between them.

Using the process-based perspective of boundary work, the paper connects studies on cross-functional teaming and open innovation through the concept of “multiplex boundary work.” It also contributes to the literature on boundary work by showing the challenges of using collaborative spaces as organizational support tools for multiplex boundary spanning.

The purpose of this paper is to present conceptual definitions for digital object use and reuse. Typically, assessment of digital repository content struggles to go beyond traditional usage metrics such as clicks, views or downloads. This is problematic for galleries, libraries, archives, museums and repositories (GLAMR) practitioners because use assessment does not tell a nuanced story of how users engage with digital content and objects.

This paper reviews prior research and literature aimed at defining use and reuse of digital content in GLAMR contexts and builds off of this group’s previous research to devise a new model for defining use and reuse called the use-reuse matrix.

This paper presents the use-reuse matrix, which visually represents eight categories and numerous examples of use and reuse. Additionally, the paper explores the concept of “permeability” and its bearing on the matrix. It concludes with the next steps for future research and application in the development of the Digital Content Reuse Assessment Framework Toolkit (D-CRAFT).

The authors developed this model and definitions to inform D-CRAFT, an Institute of Museum and Library Services National Leadership Grant project. This toolkit is being developed to help practitioners assess reuse at their own institutions.

To the best of the authors’ knowledge, this paper is one of the first to propose distinct definitions that describe and differentiate between digital object use and reuse in the context of assessing digital collections and data.

The purpose of this paper is to report on the developments in manufacturing soft magnetic materials using laser powder bed fusion (L-PBF).

Ternary soft magnetic Fe-49Co-2V powder was produced by gas atomization and used in an L-PBF machine to produce samples for material characterization. The L-PBF process parameters were optimized for the material, using a design of experiments approach. The printed samples were exposed to different heat treatment cycles to improve the magnetic properties. The magnetic properties were measured with quasi-static direct current and alternating current measurements at different frequencies and magnetic flux densities. The mechanical properties were characterized with tensile tests. Electrical resistivity of the material was measured.

The optimized L-PBF process parameters resulted in very low porosity. The magnetic properties improved greatly after the heat treatments because of changes in microstructure. Based on the quasi-static DC measurement results, one of the heat treatment cycles led to magnetic saturation, permeability and coercivity values comparable to a commercial Fe-Co-V alloy. The other heat treatments resulted in abnormal grain growth and poor magnetic performance. The AC measurement results showed that the magnetic losses were relatively high in the samples owing to formation of eddy currents.

The influence of L-PBF process parameters on the microstructure was not investigated; hence, understanding the relationship between process parameters, heat treatments and magnetic properties would require more research.

The relationship between microstructure, chemical composition, heat treatments, resistivity and magnetic/mechanical properties of L-PBF processed Fe-Co-V alloy has not been reported previously.

Accurate values for infiltration rate are important to reliably estimate heat losses from buildings. Infiltration rate is rarely measured directly, and instead is usually estimated using algorithms or data from fan pressurisation tests. However, there is growing evidence that the commonly used methods for estimating infiltration rate are inaccurate in UK dwellings. Furthermore, most prior research was conducted during the winter season or relies on single measurements in each dwelling. Infiltration rates also affect the likelihood and severity of summertime overheating. The purpose of this work is to measure infiltration rates in summer, to compare this to different infiltration estimation methods, and to quantify the differences.

Fifteen whole house tracer gas tests were undertaken in the same test house during spring and summer to measure the whole building infiltration rate. Eleven infiltration estimation methods were used to predict infiltration rate, and these were compared to the measured values. Most, but not all, infiltration estimation methods relied on data from fan pressurisation (blower door) tests. A further four tracer gas tests were also done with trickle vents open to allow for comment on indoor air quality, but not compared to infiltration estimation methods.

The eleven estimation methods predicted infiltration rates between 64 and 208% higher than measured. The ASHRAE Enhanced derived infiltration rate (0.41 ach) was closest to the measured value of 0.25 ach, but still significantly different. The infiltration rate predicted by the “divide-by-20” rule of thumb, which is commonly used in the UK, was second furthest from the measured value at 0.73 ach. Indoor air quality is likely to be unsatisfactory in summer when windows are closed, even if trickle vents are open.

The findings have implications for those using dynamic thermal modelling to predict summertime overheating who, in the absence of a directly measured value for infiltration rate (i.e. by tracer gas), currently commonly use infiltration estimation methods such as the “divide-by-20” rule. Therefore, infiltration may be overestimated resulting in overheating risk and indoor air quality being incorrectly predicted.

Direct measurement of air infiltration rate is rare, especially multiple tests in a single home. Past measurements have invariably focused on the winter heating season. This work is original in that the tracer gas technique used to measure infiltration rate many times in a single dwelling during the summer. This work is also original in that it quantifies both the infiltration rate and its variability, and compares these to values produced by eleven infiltration estimation methods.

This paper aims to investigate the impact of combining grain-oriented electrical steel (GOES) grades on specific iron losses and the flux density distribution within a single-phase magnetic core.

This paper presents the results of finite-element method (FEM) simulations investigating the impact of mixing two different GOES grades on losses of a single-phase magnetic core. The authors used different models: a 3D model with a highly detailed geometry including both saturation and anisotropy, as well as a simplified 2D model to save computation time. The behavior of the flux distribution in the mixed magnetic core is analyzed. Finally, the results from the numerical simulations are compared with experimental results.

The specific iron losses of a mixed magnetic core exhibit a nonlinear decrease with respect to the GOES grade with the lowest losses. Analyzing the magnetic core behavior using 2D and 3D FEM shows that the rolling direction of the GOES grades plays a critical role on the nonlinearity variation of the specific losses.

The novelty of this research lies in achieving an optimum trade-off between the manufacturing cost and the core efficiency by combining conventional and high-performance GOES grade in a single-phase magnetic core.

This work introduces an efficient and accurate technique to solve the eddy current problem in laminated iron cores considering vector hysteresis.

The mixed multiscale finite element method based on the based on the T,Φ-Φ formulation, with the current vector potential T and the magnetic scalar potential Φ allows the laminated core to be modelled as a single homogeneous block. This means that the individual sheets do not have to be resolved, which saves a lot of computing time and reduces the demands on the computer system enormously.

As a representative numerical example, a single-phase transformer with 4, 20 and 184 sheets is simulated with great success. The eddy current losses of the simulation using the standard finite element method and the simulation using the mixed multiscale finite element method agree very well and the required simulation time is tremendously reduced.

The vector Preisach model is used to account for vector hysteresis and is integrated into the mixed multiscale finite element method for the first time.

During the construction process of the China Railway Track System (CRTS) I type filling layer, the nonwoven fabric bags have been used as grouting templates for cement asphalt (CA) emulsified mortar. The porous structure of nonwoven fabrics endowed the templates with breathability and water permeability. The standard requires that the volume expansion rate of CA mortar must be controlled within 1%–3%, which can generate expansion pressure to ensure that the cavities under track slabs are filled fully. However, the expansion pressure caused some of the water to seep out from the periphery of the filling bag, and it would affect the actual mix proportion of CA mortar. The differences in physical and mechanical properties between the CA mortar under track slabs and the CA mortar formed in the laboratory were studied in this paper. The relevant results could provide important methods for the research of filling layer materials for CRTS I type and other types of ballastless tracks in China.

During the inspection of filling layer, the samples of CA mortar from different working conditions and raw materials were taken by uncovering the track slabs and drilling cores. The physical and mechanical properties of CA mortar under the filling layer of the slab were systematically analyzed by testing the electrical flux, compressive strength and density of mortar in different parts of the filling layer.

In this paper, the electric flux, the physical properties and mechanical properties of different parts of CA mortar under the track slab were investigated. The results showed that the density, electric flux and compressive strength of CA mortar were affected by the composition of raw materials for dry powders and different parts of the filling layer. In addition, the electrical flux of CA mortar gradually decreased within 90 days’ age. The electrical flux of samples with the thickness of 54 mm was lower than 500 C. Therefore, the impermeability and durability of CA mortar could be improved by increasing the thickness of filling layer. Besides, the results showed that the compressive strength of CA mortar increased, while the density and electric flux decreased gradually, with the prolongation of hardening time.

During 90 days' age, the electrical flux of the CA mortar gradually decreased with the increase of specimen thickness and the electrical flux of the specimens with the thickness of 54 mm was lower than 500 C. The impermeability and durability of the CA mortar could be improved by increasing the thickness of filling layer. The proposed method can provide reference for the further development and improvement of CRTS I and CRTS II type ballastless track in China.