Search results

The combined effects of several complex phenomena cause the deterioration of elements in steel hydraulic structures (SHSs) within the US lock system: corrosion, cracking and fatigue, impact and overloads. Predicting the future condition state of these structures by the use of current condition state inspection data can be achieved through the probabilistic chain deterioration model. The purpose of this study is to derive the transition probability matrix using final elements modeling of a miter gate.

If predicted accurately, this information would yield benefits in determining the need for rehabilitation or replacement of SHS. However, because of the complexity and difficulties on obtaining sufficient inspection data, there is a lack of available condition states needed to formulate proper transition probability matrices for each deterioration case.

This study focuses on using a three-dimensional explicit finite element analysis (FEM) of a miter gate that has been fully validated with experimental data to derive the transition probability matrix when the loss of flexural capacity in a corroded member is simulated.

New methodology using computational mechanics to derive the transition probability matrices of navigation steel structures has been presented.

The difficulty of deriving the transition probability matrix to perform a Markovian analysis increases when limited amount of inspection data is available. The used state of practice FEM to derive the transition probability matrix is not just necessary but also essential when the need for proper maintenance is required but limited amount of the condition of the structural system is unknown.

This paper proposes a heuristic, data-driven approach to the rapid performance evaluation of periodic maintenance on complex production plants. Through grouping, maintenance interval (MI)-based evaluation and performance assessment, potential nonvalue-adding maintenance elements can be identified in the current maintenance structure. The framework reduces management complexity and supports the decision-making process for further maintenance improvement.

The evaluation framework follows a prescriptive research approach. The framework is structured in three steps, which are further illustrated in the case study. The case study utilizes real-life data to verify the feasibility and effectiveness of the proposed framework.

Through a case study conducted on 9,538 pieces of equipment from eight offshore oil and gas production platforms, the results show considerable potential for maintenance performance improvement, including up to a 23% reduction in periodic maintenance hours.

The problem of performance evaluation under limited data availability has barely been addressed in the literature on the plant level. The proposed framework aims to provide a quantitative approach to reducing the structural complexity of the periodic maintenance evaluation process and can help maintenance professionals prioritize the focus on maintenance improvement among current strategies.

The proposed framework is especially suitable for initial performance assessment in systems with a complex structure, limited maintenance records and imperfect data, as it reduces management complexity and supports the decision-making process for further maintenance improvement. A similar application has not been identified in the literature.

This paper highlights a crucial public safety issue due to falling objects from tall residential buildings in Singapore. A systematic façade inspection regime and a system of evaluation of severity for the detection and assessment of potential falling objects from tall buildings are presented.

The research uses qualitative case study approach with 450 tall residential buildings sampled for the study. The common materials, elements, components with high risk of falling objects, the nature and type of the falling, the critical factors affecting the falling, the respective level of severity, and the effectiveness of various diagnostic techniques and protocols, are summarised.

Façade for tall residential buildings in Singapore comprises mainly cementitious materials cast in situ or precast, with fixtures and architectural features, all of which have potential of falling. The common anomalies arising from each material and fixture/features are identified, the causes evaluated and their implications to future design, construction and maintenance analysed.

This study provides original and significant information to a crucial public safety issue, setting design and construction criteria that will serve as a benchmark for new and existing facades, applicable to all cities dominated by tall buildings. The paper presents original figures, checklists and guides as a basis for readers' consideration to use according to their respective unique conditions.

This study used the literature review and the modified Delphi method to evaluate the importance of the catering quality indices of university canteens in China. In order to compile the catering quality indices of university canteens in China as reference for the subsequent improvement of Chinese canteens.

This study first analysed literature data to establish the preliminary quality indices and used the modified Delphi method for measurement. After three rounds of Delphi analysis by 35 experts, the results of the catering quality indices of university canteens in China are summarised.

The research results show that university canteen catering quality issues are divided into six dimensions, including catering safety management, employee hygiene management, catering service, food quality, environmental atmosphere and corporate social responsibility. Catering safety management is the most important index, followed by employee hygiene management.

The research results can be used as suggestions for follow-up improvements in the quality of university canteens in China and a basis of reference for amendments to relevant national or local laws and regulations. The food prices, food quality and whether food hygiene and safety standards are met by university canteens are all related to the health and vital interests of the teachers and students, as well as the stability of the university. Therefore, the government should increase supervision in these aspects to avoid decline in the quality of meals due to low profits and enforce strict requirements for food safety.

This study is aimed at assessing the information security management practice with a focus on banking card security in selected financial institutions in Ethiopia, using an international information security standard as a benchmark. It is to identify the gaps and recommend best security practices to help financial institutions meet the required security compliance.

Two financial sectors were purposively selected. A total of twenty-five respondents (IT executives and IT staff) were included in the study. Quantitative data was collected using the PCI-DSS (Payment Card Industry Data Security Standard) security standard questionnaire. In addition, observation and document analysis were made.

The result shows that most of the essential security management activities in the financial sectors do not comply with the international security standard. Similarly, the level of most of the indispensable security requirements that should be in place is found to be below the acceptable level. The study also revealed major security factors that prohibit the financial sectors from PCI-DSS security standard compliance.

This study assessed the information security management practice with a focus on banking card security and tried to figure out the limitations of security practices of the organizations surveyed based on the standard adopted. The topic has not been well explored especially in the Ethiopia context. Hence, the result can positively influence security policies, particularly in the banking sector.

The paper seeks to bridge the already familiar benefits of 3D printing (3DP) to the rehabilitation of cultural heritage, still based on the use of complex and expensive handcrafted techniques and scarce materials.

A compilation of different information on frequent anomalies in cultural heritage buildings and commonly used materials is conducted; subsequently, some innovative techniques used in the construction sector (3DP and 3D scanning) are addressed, as well as some case studies related to the rehabilitation of cultural heritage building elements, leading to a reflection on the opportunities and challenges of this application within these types of buildings.

The compilation of information summarised in the paper provided a clear reflection on the great potential of 3DP for cultural heritage rehabilitation, requiring the development of new mixtures (lime mortars, for example) compatible with the existing surface and, eventually, incorporating some residues that may improve interesting properties; the design of different extruders, compatible with the new mixtures developed and the articulation of 3D printers with the available mapping tools (photogrammetry and laser scanning) to reproduce the component as accurately as possible.

This paper sets the path for a new application of 3DP in construction, namely in the field of cultural heritage rehabilitation, by identifying some key opportunities, challenges and for designing the process flow associated with the different technologies involved.

This paper aims to exemplify the use of project management tools in the scheduling of aircraft maintenance activities. This process is known as maintenance, repair and overhaul and it has gained importance within the aeronautical sector due to its expected growth in the coming years; however, it also faces increasing competitiveness in its market. This fact gives rise to the need of acting in maintenance management and seeking lower costs while maintaining the quality of the service provided. The purpose of this paper is to propose the structuring of a procedure that aims to reduce the total maintenance time (downtime) and guarantee the delivery of the aircraft on time.

The paper, through a case study at a Brazilian aircraft maintenance center, used critical path method and critical chain project management, the latter being derived from the theory of constraints, with the purpose of analyzing resources systematically and synchronizing the activities in the precedence network.

As a result, it is shown that downtime can be reduced from 11 to 5 days and improvements are proposed to achieve greater market competitiveness.

This paper demonstrates the competitive advantage that resulted from the application of project management tools in the aircraft maintenance planning and execution.