Search results

Currently, there is a great demand for those food products that are easy to prepare or ready for direct consumption. Making pear fruit/juice available round the year is desirous owing to pears' high-nutritional value and specific pleasant taste. Pear is, however, a seasonal fruit and under ambient conditions has a limited shelf life rendering it available as fresh fruit for a specific period.

The study aimed to optimize the spray drying process parameters using response surface methodology for the development of pear juice powder. The process variables included the inlet air temperature of 140–210°C, maltodextrin levels of 4–25%, atomization speed of 11,400–28,000 rpm, feed flow rate of 180–630 mL/hr, and feed total soluble solids (TSS) of 13–30°Brix. The dependent responses were powder yield, solubility, antioxidant activity {% 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging capacity}, dispersibility, hygroscopicity and particle density.

Among independent variables, inlet air temperature showed a predominant effect. The optimum processing conditions for the development of pear juice powder with optimum quality were 163.02°C inlet air temperature, 13.50% maltodextrin, 28,000 rpm atomization speed, 390.94 mL/h feed flow rate, and 25.5°Brix feed TSS. Under these optimum conditions, pear powder with desirable properties could be produced. The experimental and predicted values were found to be in agreement, indicating the suitability of the model in predicting optimizing responses of pear powder. Glass transition temperature of pear powder was found to be 36.60 ± 0.40°C, which is much higher than that of ambient temperature, suggesting better shelf stability.

The processing of pear fruit has resulted in the increased demand for pear juice powder in both domestic and international markets as a primer of new food products. The optimum conditions obtained in the current study could provide a new insight to the food industry in developing spray-dried pear powder of optimum quality. This can open up a new horizon in the field of food industry for the common masses of Jammu and Kashmir, India.

The purpose of this paper is to maraging 18Ni-300 steel fabricate by powder bed based selective laser melting (SLM) process. Microstructure and mechanical properties of the maraging steel part before and after heat treatment at a slow cooling rate were investigated.

The microstructure of the printed part was observed by optical microscopy and scanning electron microscopy. The phases were determined by X-ray diffraction. The surface roughness of the part was recorded by a profilometer. The tensile properties and microhardness of the parts before and after heat treatment were characterized by an electronic universal tensile testing machine and a Vickers hardness tester, respectively.

Maraging 18Ni-300 steel part comprised of the martensitic phase and a small fraction of austenite phase. After heat treatment, the volume fraction of austenite slightly increased. The surface roughness of the part was about 96 µm. The printed part was dense, but irregular pores were present. The yield strength, ultimate tensile strength (UTS), elongation and Young’s modulus of as-fabricated parts were 554.7 MPa, 1173.1 MPa, 10.9% and 128.9 GPa, respectively. The yield strength, UTS, elongation and Young’s modulus of as-treated parts were 2065 MPa, 2225 MPa, 4.2% and 142.5 GPa, respectively. The microhardness values of surface and cross-section of the as-fabricated part were 407.1 HV and 443.0 HV, respectively. After short-time heat treatment, the microhardness values of the surface and cross-section of the part were 542.7 HV and 567.3 HV, respectively. After long-time heat treatment, the microhardness values of the surface and cross-section of the part were 524.4 HV and 454.8 HV, respectively. The microhardness and tensile strength increased significantly with decreasing elongation due to the changes in phases and microstructure of the parts after heat treatment.

This work studied the effect of heat treatment at 550°C combined with a subsequent slow cooling rate on microstructure and mechanical properties of maraging 18Ni-300 steel obtained by the powder bed based SLM process.

Jamun is an underutilised fruit crop of India whose utilization needs to be considerably increased. Despite its impressive nutritional profile and several health benefits, its cultivation is still very limited. Hence, this study aims to highlight the essential nutrients, health benefits and value-added products of jamun fruit and seed.

Major sources of bibliometric information such as Web of Science, Scopus, PubMed and Google Scholar were extensively searched with keywords such as nutritional composition of jamun, bioactive compounds, health benefits and jamun-based food products to obtain a database of 317 papers. Thirty four publications met the criteria for review.

Jamun fruit (Syzygium cumini L.) is known for its attractive colour, astringent taste, enormous nutrients and nutraceutical properties; nevertheless, this fruit is seasonal, perishable and underutilised. Furthermore, the fruit is used for the treatment of diabetes and also possess anti-cancer, anti-inflammatory, anti-obesity and cardio-protection properties. Investigations were done on the production of value-added food products such as read-to-serve beverages, jam, cookies and cake from jamun due to their several health benefits. The present review was an attempt to provide spotlights on the health benefits and food product applications of jamun fruit and its by-products.

This review systematically collates evidence from various published sources regarding the nutritional profile, development of food products from jamun and their health benefits. The compiled information will help researchers and professional become aware of the significance of jamun fruit and thereby enhances its processing and applications in food systems.

This study aims to investigate the influence of image and reputation of imported fresh fruits on consumer satisfaction and purchase intentions. The moderating role of familiarity with imported fruits was also assessed.

A total of 332 Taiwanese consumers who had purchased imported Korean pears participated using an online survey and were grouped based on their familiarity to Korean pears. Multi-group analysis with structural equation modeling was used to test the hypotheses.

Image and reputation of imported Korean pears were identified as predictors of the satisfaction and purchase intention. Multi-group analysis results found the moderating effect of familiarity between image and satisfaction. Images were identified as predictors of the satisfaction and purchase intention of imported Korean pears for consumers with low familiarity, whereas image did not show any influence on satisfaction for consumers with high familiarity.

This study can contribute to the limited understanding of imported fresh fruit markets and provides insights into familiarity for consuming imported fresh fruits.

Pyrus Pyrifolia (Sand Pear) is one of the most underused pear variety despite its nutraceutical potential. Therefore, this paper aims to explore the Pyrus Pyrifolia in term of origin, distribution and classification, nutritional and bioactive potential, therapeutic potential and valorization along with future prospectus.

A wide variety of publications (88) were identified through electronic databases (Science direct, PubMed, SciELO, Google scholar, Link springer and Research gate) under the umbrella of different keywords such as bioactive compounds, health benefits, nutrition, sand pear, Pyrus and Pyrus pyrifolia.

Pyrus Pyrifolia (Sand Pear) is abundant in nutritional and bioactive compounds such as phenolic acids, flavonoids, terpenoids, vitamins and minerals. It exhibits therapeutic potential as being an antioxidant, anti-obesity, anti-diabetic, anti-inflammatory and anti-cancer agent. However, P. pyrifolia is not much explored by food researchers and industrialists, hence remaining underused. A few attempts have been made toward the use of P. pyrifolia for jam, jelly, candy and wine preparation. However, more research is required for the commercial processing of P. pyrifolia and to enhance its availability outside its growing area.

In this paper, nutritional and bioactive compounds of P. pyrifolia are discussed that provide knowledge to the researchers for its use as a functional ingredient.

To assess changes in advertising the British children’s annual, Chatterbox, over the first three decades of the twentieth century.

The products/firms involved were identified and the advertisements classified into product groups. The advertising content was examined in terms of the intended audience and the five longest-running advertisements were analysed to gauge trends at the single-product level. Attention was also given to long-term changes at the product-group level, the effects of the Great War and the roles of the publisher, editor and advertisers.

In total, 457 advertisements were documented over 1900-1930 representing about 80 different products/firms. They were classified into 10 distinctive groupings with Food Ingredients, at almost 26 per cent of the total, being the most abundant. Overwhelmingly, the advertisements were directed at middle-class women/mothers (∼75 per cent of the total), then children (∼15 per cent) with men/fathers essentially being ignored. The five longest-running advertisements (over 25 per cent of the total) showed little evidence of change but there were significant trends at the product-group level, in marketing to children and in average advertisement size, particularly during the last two decades of the study period, partially reflecting gradual social and technological changes.

Comprehensive quantitative analysis of advertising in children’s magazine literature over several decades is problematic because of the difficulty in accessing sufficient source material. The present study is exhaustive and establishes a reference point for the assessment of advertising in similar publications in the post-Victorian era.

The purpose of this paper is to explore the level of substitution of margarine with African pear that will be acceptable to consumers.

A recipe for cookies is modified by replacing margarine with African pear. Plantain composite flour is also used. Physical parameters and proximate composition are determined using standard methods. Sensory evaluation is carried out using sensory panelists.

The moisture content of the cookies ranges from 2.09 to 4.10 per cent, fat content and ash contents range from 21.40 to 22.90 per cent and 2.14 to 2.77 per cent, respectively. The ash content is higher than the value 1.43 per cent recorded for cookies made from 100 per cent margarine. The average value for energy 487 kcal/100 g will meet the recommended daily dietary allowance. There is no significant difference on the average weight, thickness, volume and density of the cookies made from 25 to 100 per cent African pear with either 25 or 50 per cent ripe/unripe plantain flour. Average weight, thickness, volume and density are 5.60 g, 058 mm, 9.72 cm³, and 0.574 g/cm³, respectively. Sensory evaluation reveals that composite flour at 25‐100 per cent with either ripe or unripe plantain shows significant difference (p < 0.05) in taste and overall acceptability. At 50 per cent unripe or ripe plantain composite flour, there is no significant difference in attributes except flavour.

Up to 50 per cent level of substitution of wheat for plantain flour is found to be acceptable in the preliminary report and used.

Replacement of margarine with African pear at below and up to 50 per cent is acceptable. Overall acceptability reduces with increasing level of substitution.

African pear pulp substitution with as much as 50 per cent does not adversely affect the proximate composition, physical and sensory characteristic. At which level the protein and ash content increases, which is an indication of good nutritional quality. African pear could be processed into value‐added product which can be of interest in school‐children feeding programs and in combating malnutrition, which is still prevalent in Nigeria.

The effects of incorporation of Locusta migratoria (LM) powder at different levels (0, 1, 2, 3, 4 and 5%) on nutritional, qualitative and sensory properties of baked breads were investigated.

Chemical composition, mineral elements and functional properties of wheat flour, LM powder and their binary mixture systems were determined. The breads were assayed for proximate composition, minerals, amino acids profile, physical characteristics and sensorial properties.

LM powder have relatively high levels of protein (51.97% db), fat (23.15% db) and fibers (13.76% db). LM powder presented significantly (p ≤ 0.05) greater water absorption capacity (WAC), oil absorption capacity(OAC), emulsion activity (EA) and foam capacity (FC) as compared to wheat flour. Blending wheat flour with various levels of LM powder significantly (p ≤ 0.05) improved the functional properties of binary mixture systems. Protein, fat, fiber and ash contents of bread samples significantly increased with the addition of LM powder. No significant differences (p ≤ 0.05) were recorded in specific volume between control breads and those breads containing LM powder up to 2%. Breads fortified with LM powder contained higher values of essential amino acids than the limits of FAO/WHO pattern, with exception of lysine. Sensory evaluation results showed that bread samples with the addition of LM powder at levels 1–4% had high overall acceptability.

Limitations of our study are the lack of approved and professional programs about management, collection, harvesting, processing, marketing and consumption of edible insects; therefore, these results should be generalized implications for industry. This present study, therefore, provides useful data to support public health nutrition aimed at improving the nutritional health of populations through the promotion of bakery products enriched with LM powder.

The main findings of this study indicated that the addition of 1–4% of LM powder into wheat flour enhanced sensory and nutritional properties of produced breads.

It is concluded that the addition of LM powder improves the nutritional and sensorial properties of the produced bread when the wheat flour is substituted with 1–4% of LM powder.

Manufacturers show a growing tendency to remove the skin from all fruits and vegetables before drying. Because of custom or the type of skin, some kinds, notably prunes and apricots, however, are rarely peeled. Peeling may be done by hand or by specially designed machines. Many types of knives, with straight, curved or guarded blades, and hand‐operated cutting machines are obtainable for peeling, trimming, coring and otherwise preparing the material to be dried. Machines for peeling and coring both apples and pears in one operation are available. Friction or rotary mechanical peelers are particularly well suited for handling roots and tubers. All peelers of this type depend upon the rasping effect of rough surfaces of cement, corundum, etc., forming some part of the lining of the peeler, when the product is rotated rapidly within the cylinder by a moving bottom. The material is introduced at the top and discharged by a side door. These machines are usually equipped with water sprays, which wash off the dirt and the particles of skin removed by the peeler. Other types make use of an open flame which chars the skin so that it can be brushed or washed off. Several types of lye peelers are available. All depend upon immersion in or spraying with hot (190°–200° F.) lye solution. The length of treatment must be determined for each batch of fruit. It should be long enough to permit the ready removal of skin by water sprays or by rubbing, but must not injure the flesh of the product being peeled. Following the peeling, the fruit or vegetable must be inspected and all remaining skin removed with trimming knives, especially adapted to different products. Lye is used to check the skins of prunes and grapes in order to facilitate drying. The fruit is in contact with the hot lye solution long enough to break the skin by many minute fissures or checks, but not long enough to loosen it. The concentration and temperature of the lye bath are similar to those for lye peeling. After the lye treatment the fruit is carefully washed to remove all traces of the lye bath before further processing. Fruits are sliced, cubed, shredded, or left whole. Vegetables are sliced, cubed, shredded, or chipped. The cutting is done by hand or by some one of the numerous machines on the market. Some of the machines consist essentially of rotating knives or cutting surfaces operated by hand or by power. In others the cutting surfaces are stationary and the product is forced against the blades. Special machines for cutting beans are made. In the most satisfactory type of cubing machine the slices are cut, carried to a die, and forced through by a plunger. Manufacturers find it desirable to pit or seed stone fruits, as pitted or seeded fruits dry more rapidly and sell more readily than those from which the pits or seeds are not removed. Machines for pitting, seeding and paring most fruits are for sale by food‐machinery manufacturers, but the greater part of dried fruits are pitted by hand. After the raw material is prepared in the desired form, no time should elapse before traying and subsequent treatments preliminary to its being placed in the drier. No definite rule can be given for determining the quantity of material to be placed on a unit area of tray surface. Experience will soon show the operators how much will insure even, rapid drying. Many of the larger fruits must be trayed only one layer deep. Overloading trays must be avoided. Trays should be light but capable of withstanding strain, and they should permit a maximum exposure of the materials. Trays of the type most often seen have a spreading surface formed either of wire screen or wooden slats held firmly in a narrow but rigid wooden or metal frame. Many of the trays now in use have been employed in sun or other drying. If new trays are made, the one‐man tray, about 2½ to 3 feet square, will be found to be the most convenient. Wooden‐slat trays can be more cheaply constructed than wire‐screen trays, but they have a high rate of upkeep. These trays, however, are not affected by sulphur fumes or fruit acids, for which reason they are preferred for most fruits. The trucks for conveying loaded trays are of two general types. In one a skeleton frame is provided with cleats, upon which the trays rest. The cleats are from 2 to 4 inches from centre to centre above one another. These trucks are made of various combinations of wood or angle iron. The other, which may be called the stack type, has a low floor supported by wheels 3 to 5 inches in diameter. The trays are piled or stacked one above the other, and the desired space between them is maintained by the raised sides of the trays. Various alterations may be made for convenience in handling and loading. The original method of preparing fruits and vegetables for drying consisted in washing, peeling when desirable, cutting, and traying. By this method most dark‐coloured materials made fairly presentable dried foods, but light‐coloured fruits and vegetables did not. The attempt to overcome this difficulty led to the introduction of blanching, or processing, and sulphuring. The blanching, or processing, agent is usually steam or hot water, which helps the product to retain its natural colour. In the steam treatment the material is subjected to live steam for the required period. In blanching by hot water, the temperature is maintained at 190° F. to the boiling point, depending on the material being treated. As a rule, steam blanching is preferred to blanching in liquid, because the loss of soluble constituents of the food is less, a better flavoured product results, and the use of steam is ordinarily more convenient. Light‐coloured fruits (apricots, peaches, pears, and at times grapes and figs) are sulphured in order to prevent discolouration during and after drying and to facilitate drying. Sulphuring plasmolyzes the cells and makes permeable the semipermeable cell membrane, thus facilitating the diffusion of water from the interior to the surface. When the general plan of operation makes it desirable, the fruit on trays is sulphured in an enclosed chamber, provided with an entrance for the sulphur gas and an exit for a draught. The chamber is usually large enough to hold one to two loaded trucks. Preferably the sulphur is burned in shallow pans stacked one above the other in zigzag formation. This method gives a large quantity of sulphur dioxide in a comparatively short time. Sometimes a sulphur stove is placed outside the chamber and the sulphur fumes are carried into the chamber by flues. Sulphuring should always be as light as possible to accomplish the desired results. The type of equipment best adapted to any particular use depends upon several factors. If the products are to be dried for home or farm use, then the equipment should be as simple as possible. If the dried material is to be prepared in large quantities for sale to the public, then the type of equipment will depend to a great extent upon the nature of the product desired. To meet these needs many devices have been originated and patented, so that all phases of drying are well covered. Materials can be dried more rapidly and at lower temperatures in vacuum than at atmospheric pressure. Such foods as are extremely susceptible to damage by heat are more safely dried in vacuum. However, vacuum driers are seldom used in large‐scale operations on the usual commercial grades of dehydrated fruits and vegetables. The apparatus is too expensive and usually the advantages gained are not sufficient to compensate for the added cost of equipment and operation. Enzymes are not inactivated by evaporation alone, and it will be found desirable in many cases to inactivate them by blanching or by other means if vacuum drying is used.

To overcome the need of seasonal fruit ber, consumers prefer to use fruits in such a form that can be prepared easily or consumed instantly. By transforming them into powders, they can be effortlessly attained as well as preserved, stored and processed.

To optimize the spray drying conditions for development of ber fruit powder, response surface methodology was used. The experimental design consisted of 13 runs. The levels of independent variables, i.e. inlet air temperature, varied from 153.79ºC to 196.21ºC and maltodextrin concentration, from 4.17 to 9.83 per cent. The responses were moisture content, bulk density, solubility, vitamin C, ΔE and L value.

The second-order polynomial model fitted for moisture content, bulk density, solubility, vitamin C, ΔE and L value was highly significant (p < 0.001) for each response. The inlet air temperature showed maximum influence on moisture content, bulk density, solubility and vitamin C, whereas the maltodextrin concentration showed maximum influence on bulk density, solubility, ΔE and L value. The predicted values were attained as moisture 4.90 per cent, bulk density 0.35g/ml, solubility 89.11 per cent, vitamin C 91.06mg/100g, ΔE 31.03 and L 87.78. The recommended optimum spray drying conditions were inlet air temperature and maltodextrin concentration of 166.64°C and 9.26 per cent, respectively.

Spray drying of the underused Indian fruit ber has enhanced its utility. Ber powder can further be used as an instant beverage, in sweets, as a flavoring agent and in soft drinks.