Search results

For the purpose of reducing the incidence of hazardous materials transport accident, eliminating the potential threats and ensuring their safety, aiming at the shortcomings in the process of current hazardous materials transportation management, this paper aims to construct the framework of hazardous materials transportation safety management system under the vehicle-infrastructure connected environment.

The system takes the intelligent connected vehicle as the main supporter, integrating GIS, GPS, eye location, GSM, networks and database technology.

By analyzing the transportation characteristics of hazardous materials, this system consists of five subsystems, which are vehicle and driver management subsystem, dangerous sources and hazardous materials management subsystem, route analysis and optimization subsystem, early warning and emergency rescue management subsystem, and basic information query subsystem.

Hazardous materials transportation safety management system includes omnibearing real-time monitoring, timely updating of system database, real-time generation and optimization of emergency rescue route. The system can reduce the transportation cost and improve the ability of accident prevention and emergency rescue of hazardous materials.

A real-time production scheduling method for semiconductor back-end manufacturing process becomes increasingly important in industry 4.0. Semiconductor back-end manufacturing process is always accompanied by order splitting and merging; besides, in each stage of the process, there are always multiple machine groups that have different production capabilities and capacities. This paper studies a multi-agent based scheduling architecture for the radio frequency identification (RFID)-enabled semiconductor back-end shopfloor, which integrates not only manufacturing resources but also human factors.

The architecture includes a task management (TM) agent, a staff instruction (SI) agent, a task scheduling (TS) agent, an information management center (IMC), machine group (MG) agent and a production monitoring (PM) agent. Then, based on the architecture, the authors developed a scheduling method consisting of capability & capacity planning and machine configuration modules in the TS agent.

The authors used greedy policy to assign each order to the appropriate machine groups based on the real-time utilization ration of each MG in the capability & capacity (C&C) planning module, and used a partial swarm optimization (PSO) algorithm to schedule each splitting job to the identified machine based on the C&C planning results. At last, we conducted a case study to demonstrate the proposed multi-agent based real-time production scheduling models and methods.

This paper proposes a multi-agent based real-time scheduling framework for semiconductor back-end industry. A C&C planning and a machine configuration algorithm are developed, respectively. The paper provides a feasible solution for semiconductor back-end manufacturing process to realize real-time scheduling.

Resilience concepts in integrated urban transport refer to the performance of dealing with external shock and the ability to continue to provide transportation services of all modes. A robust transportation resilience is a goal in pursuing transportation sustainability. Under this specified context, while before the perturbations, robustness refers to the degree of the system’s capability of functioning according to its design specifications on integrated modes and routes, redundancy is the degree of duplication of traffic routes and alternative modes to maintain persistency of service in case of perturbations. While after the perturbations, resourcefulness refers to the capacity to identify operational problems in the system, prioritize interventions and mobilize necessary material/ human resources to recover all the routes and modes, rapidity is the speed of complete recovery of all modes and traffic routes in the urban area. These “4R” are the most critical components of urban integrated resilience.

The trends of transportation resilience's connotation, metrics and strategies are summarized from the literature. A framework is introduced on both qualitative characteristics and quantitative metrics of transportation resilience. Using both model-based and mode-free methodologies that measure resilience in attributes, topology and system performance provides a benchmark for evaluating the mechanism of resilience changes during the perturbation. Correspondingly, different pre-perturbation and post-perturbation strategies for enhancing resilience under multi-mode scenarios are reviewed and summarized.

Cyber-physic transportation system (CPS) is a more targeted solution to resilience issues in transportation. A well-designed CPS can be applied to improve transport resilience facing different perturbations. The CPS ensures the independence and integrity of every child element within each functional zone while reacting rapidly.

This paper provides a more comprehensive understanding of transportation resilience in terms of integrated urban transport. The fundamental characteristics and strategies for resilience are summarized and elaborated. As little research has shed light on the resilience concepts in integrated urban transport, the findings from this paper point out the development trend of a resilient transportation system for digital and data-driven management.

The paper aims to investigate the comfort-related performances of an innovative solar shading solution based on a new composite patented material that consists of a cement-based matrix coupled with a stretchable three-dimensional textile. The paper’s aim is, through a performance-based generative design approach, to develop a high-performance static shading system able to guarantee adequate daylit spaces, a connection with the outdoors and a glare-free environment in the view of a holistic and occupant-centric daylight assessment.

The paper describes the design and simulation process of a complex static shading system for digital manufacturing purposes. Initially, the optical material properties were characterized to calibrate radiance-based simulations. The developed models were then implemented in a multi-objective genetic optimization algorithm to improve the shading geometries, and their performance was assessed and compared with traditional external louvres and overhangs.

The system developed demonstrates, for a reference office space located in Milan (Italy), the potential of increasing useful daylight illuminance by 35% with a reduced glare of up to 70%–80% while providing better uniformity and connection with the outdoors as a result of a topological optimization of the shape and position of the openings.

The paper presents the innovative nature of a new composite material that, coupled with the proposed performance-based optimization process, enables the fabrication of optimized shading/cladding surfaces with complex geometries whose formability does not require ad hoc formworks, making the process fast and economic.

Facing the diverse needs of large-scale customers, based on available railway service resources and service capabilities, this paper aims to research the design method of railway freight service portfolio, select optimal service solutions and provide customers with comprehensive and customized freight services.

Based on the characteristics of railway freight services throughout the entire process, the service system is decomposed into independent units of service functions, and a railway freight service combination model is constructed with the goal of minimizing response time, service cost and service time. A model solving algorithm based on adaptive genetic algorithm is proposed.

Using the computational model, an empirical analysis was conducted on the entire process freight service plan for starch sold from Xi'an to Chengdu as an example. The results showed that the proposed optimization model and algorithm can effectively guide the design of freight plans and provide technical support for real-time response to customers' diversified entire process freight service needs.

With the continuous optimization and upgrading of railway freight source structure, customer demands are becoming increasingly diverse and personalized. Studying and designing a reasonable railway freight service plan throughout the entire process is of great significance for timely response to customer needs, improving service efficiency and reducing design costs.

Decisions taken during the early design of adaptive façades involving kinetic, active and responsive envelope for complex commercial buildings have a substantial effect on inclusive building functioning and the comfort level of inhabitants. This study aims to present the application of an analytic network process (ANP) model indicating the order of priority for high performance criteria that must be taken into account in the assessment of the performance of adaptive façade systems for complex commercial buildings.

The nominal group technique (NGT) stimulating and refining group judgments are used to find and categorize relevant high performance attributes of the adaptive façade systems and their relative pair-wise significance scores. An ANP model is applied to prioritize these high performance objectives and criteria for the adaptive façade systems.

Embodied energy and CO₂ emission, sustainability, energy saving, daylight and operation maintenance were as the most likely and crucial high performance criteria. The criteria and the weights presented in this study could be used as guidelines for evaluating the performance of adaptive façade systems for commercial buildings in planning and design phases.

This research primarily provides the required actions and evaluations for design managers in accomplishing a high performance adaptive façade system, with the support of an ANP method. Before beginning the adaptive façade system of a building design process, the design manager must determine the significance of each of these attributes as high performance primacies will affect the results all through the entire design process.

In this research, a relatively innovative, systematic and practical approach is proposed to sustain the decision-making procedure for evaluation of the high performance criteria of adaptive façade systems in complex commercial buildings.

This paper aims to identify the occupational profiles of a logistics and a supply chain (SC) controller, both promising SC professions, examining the required competences and tasks undertaken while taking into account current trends in supply chain management and its wider dimensions.

The study used a content analysis based on job advertisements for the position of logistics controller and SC controller. The collected material allowed the construction of an occupational competence mix model in the style of Cheetham and Chivers for the logistics and SC controller, and the identification of the level of competence of both professions, using the model proposed by Czapla. In addition, the analysis of the data was supplemented by use of the Anova test and a radar chart.

The SC and logistics controllers have a high degree of similarity in both the meta and core competences areas. Similarities also occur in the case of the analysed groups of tasks undertaken by these professions. Tasks in the areas of “definition” and “maintaining” prevail. The SC controller and the logistics controller are considered “engaged inspirers” because they have reached this level of professional competence. Both these professions can ensure an effective, sustainable and transparent SC through direct cooperation with the SC manager and/or logistics manager.

This study uses a content analysis based on job advertisements addressed to the German market. These job advertisements are standardized, and therefore, provide only a general outline of the competences and tasks of the SC and logistics controllers.

The study provides information to practitioners by identifying the competences and tasks assigned to the SC and logistics controllers that are needed to improve the efficiency and transparency of the SC and its management. The research is an incentive for people involved in education to adapt changes in curricula in the business (accounting, controlling and logistics) and engineering (related to logistics) fields of study by creating courses based on SC controlling or/and logistics controlling.

The study shows the current, necessary changes for SC professionals (e.g. the appointment of a SC controller and/or logistics controller) resulting from changes in business and the challenges for SC management (e.g. transparency and sustainability).

The purpose of this review is to comprehensively consider the material properties and processing of additive titanium alloy and provide a new perspective for the robotic grinding and polishing of additive titanium alloy blades to ensure the surface integrity and machining accuracy of the blades.

At present, robot grinding and polishing are mainstream processing methods in blade automatic processing. This review systematically summarizes the processing characteristics and processing methods of additive manufacturing (AM) titanium alloy blades. On the one hand, the unique manufacturing process and thermal effect of AM have created the unique processing characteristics of additive titanium alloy blades. On the other hand, the robot grinding and polishing process needs to incorporate the material removal model into the traditional processing flow according to the processing characteristics of the additive titanium alloy.

Robot belt grinding can solve the processing problem of additive titanium alloy blades. The complex surface of the blade generates a robot grinding trajectory through trajectory planning. The trajectory planning of the robot profoundly affects the machining accuracy and surface quality of the blade. Subsequent research is needed to solve the problems of high machining accuracy of blade profiles, complex surface material removal models and uneven distribution of blade machining allowance. In the process parameters of the robot, the grinding parameters, trajectory planning and error compensation affect the surface quality of the blade through the material removal method, grinding force and grinding temperature. The machining accuracy of the blade surface is affected by robot vibration and stiffness.

This review systematically summarizes the processing characteristics and processing methods of aviation titanium alloy blades manufactured by AM. Combined with the material properties of additive titanium alloy, it provides a new idea for robot grinding and polishing of aviation titanium alloy blades manufactured by AM.

Connecting autonomous drones to ground operations and services is a prerequisite for the adoption of scalable and sustainable drone services in the built environment. Despite the rapid advance in the field of autonomous drones, the development of ground infrastructure has received less attention. Contemporary airport design offers potential solutions for the infrastructure serving autonomous drone services. To that end, this paper aims to construct a framework for connecting air and ground operations for autonomous drone services. Furthermore, the paper defines the minimum facilities needed to support unmanned aerial vehicles for autonomous logistics and the collection of aerial data.

The paper reviews the state-of-the-art in airport design literature as the basis for analysing the guidelines of manned aviation applicable to the development of ground infrastructure for autonomous drone services. Socio-technical system analysis was used for identifying the service needs of drones.

The key findings are functional modularity based on the principles of airport design applies to micro-airports and modular service functions can be connected efficiently with an autonomous ground handling system in a sustainable manner addressing the concerns on maintenance, reliability and lifecycle.

As the study was limited to the airport design literature findings, the evolution of solutions may provide features supporting deviating approaches. The role of autonomy and cloud-based service processes are quintessentially different from the conventional airport design and are likely to impact real-life solutions as the area of future research.

The findings of this study provided a framework for establishing the connection between the airside and the landside for the operations of autonomous aerial services. The lack of such framework and ground infrastructure has hindered the large-scale adoption and easy-to-use solutions for sustainable logistics and aerial data collection for decision-making in the built environment.

The evolution of future autonomous aerial services should be accessible to all users, “democratising” the use of drones. The data collected by drones should comply with the privacy-preserving use of the data. The proposed ground infrastructure can contribute to offloading, storing and handling aerial data to support drone services’ acceptability.

To the best of the authors’ knowledge, the paper describes the first design framework for creating a design concept for a modular and autonomous micro-airport system for unmanned aviation based on the applied functions of full-size conventional airports.

Based on a resulting typing model, this paper focuses on four types of leaders (Approachables on the sidelines, Distanced overseers, Realistic succeeders and Dedicated sensitives), who differ in the analytical core category of “development of awareness.”

Internal team coaching is intended to strengthen leaders in the health care system. The Team Leader Coaching Programme (TLCP) was implemented as an internal coaching instrument at rehabilitation centers using a train-the-trainer format. Twenty-one team leaders were surveyed on their experience of the coaching process they implemented in their teams. The interviews were analyzed using the grounded theory method (GTM) as theoretically discussed by representatives of second-generation GTM (Charmaz, 2014).

Use of the TLCP proved to be an intervention for initiating and enhancing an awareness development process regarding team leaders' reflections on their own position and leadership role, regardless of their profession. This process was found to be a prerequisite for implementing the learned content. The typing model is discussed given current contextual conditions in the rehabilitation system and their connectivity in practice for integrating coaching elements into daily management.

This article presents a typology of healthcare leaders. Thanks to the reconstructive approach using grounded theory methodology, this article presents an in-depth analysis of the implementation process of a coaching program. The findings are both connectable to applied leadership research and useable for further development of training and interventions to strengthen team leaders in clinical settings.