Search results

This study examined data from 13 international tall residential timber building case studies to increase our understanding of the emerging global trends.

Data were collected through literature surveys and case studies to examine the architectural, structural and constructional points of view to contribute to knowledge about the increasing high-rise timber constructions globally.

The main findings of this study indicated that: (1) central cores were the most preferred type 10 of core arrangements; (2) frequent use of prismatic forms with rectilinear plans and regular extrusions were identified; (3) the floor-to-floor heights range between 2.81 and 3.30 m with an average of 3 m; (4) the dominance of massive timber use over hybrid construction was observed; (5) the most used structural system was the shear wall system; (6) generally, fire resistance in primary and secondary structural elements exceeded the minimum values specified in the building codes; (7) the reference sound insulation values used for airborne and impact sounds had an average of 50 and 56 dB, respectively.

There is no study in the literature that comprehensively examines the main architectural and structural design considerations of contemporary tall residential timber buildings.

It is widely recognized that interior office space can affect health in several ways. Strategic and evidence-based design, including explicit design objectives, well-chosen design solutions and evaluation of results, aid realization of desired health effects. Therefore, this paper aims to identify possibly effective interior design strategies and accompanying design solutions and to provide examples of effectiveness measures.

A literature sample of 59 peer-reviewed papers published across disciplines was used to collect examples of workplace design features that have positively influenced workers’ well-being. The papers were grouped by their health objective and design scope successively and their theoretical assumptions, measures and findings were analyzed.

Four main workplace design strategies were identified. Design for comfort aims at reducing or preventing health complaints, discomfort and stress, following a pathogenic approach. It has the longest tradition and is the most frequently addressed in the included papers. The other three take a salutogenic approach, promoting health by increasing resources for coping with demands through positive design. Design for restoration supports physical and mental recovery through connections with nature. Design for social well-being facilitates social cohesion and feelings of belonging. Design for healthy behavior aims at nudging physical activity in the workplace.

By drawing complementary perspectives and offering examples of design solutions and effectiveness measures, this paper encourages workplace designers, managers and researchers to take a transdisciplinary and evidence-based approach to healthy workplaces. It also serves as a starting point for future empirical research.

The paper investigates whether cultural lineage mediates gender gaps in child nutrition. It captures nutrition using height-for-age and stunting. The analysis uses the 2014 Malawi Millennium Development Goals Endline Survey data. We find evidence of male child nutrition deprivation in matrilineal cultural lineage. The gender of the household head does not relate to the mediating role of lineage on gendered nutrition gaps. As such, the analysis of gendered nutrition should account for the potential impact of culture to produce policy relevant estimates. Furthermore, deficiencies in male nutrition remains a strong health problem, particularly in cultures that benefit most from returns on female children. In these cultures, lineage dominates personal parental preferences. Therefore, there is a need to revisit received wisdom that providing more resources to female heads eliminates gender gaps by provision of culture-tailored nutritional interventions.

This study investigates the relationship between the strength of innovative entrepreneurial ecosystems and subjective well-being in 43 European smart cities. Subjective well-being is operationalized by a Quality of Life (QOL) survey that references the level of multidimensional satisfaction or happiness expressed by residents at the city level. The entrepreneurial ecosystem concept depicted here highlights actor interdependence that creates new value in a specific community by undertaking innovative entrepreneurial activities. The research uses objective and subjective variables to analyze the relationships between the entrepreneurial ecosystem and subjective well-being.

The authors conducted a cluster analysis with a nonaggregative quantitative approach based on the theory of the partially ordered set (poset); the objective was to find significant smart city level relationships between the entrepreneurial ecosystem and subjective well-being.

The strength of the entrepreneurial ecosystem is positively related to subjective well-being only in large cities. This result confirms a strong interdependency between the creation of innovative entrepreneurial activities and subjective well-being in large cities. The smart cities QOL dimensions showing higher correlations with the entrepreneurial ecosystem include urban welfare, economic well-being and environmental quality, such as information and communications technology (ICT) and mobility.

Despite the main implications being properly referred to large cities, the governments of smart cities should encourage and promote programs to improve citizens' subjective well-being and to create a conducive entrepreneurship environment.

This study is one of the few contributions focused on the relationship between the entrepreneurial smart city ecosystem and subjective well-being in the urban environment.

The Maritime Labour Convention (MLC) embodies standards of existing international maritime labour conventions and recommendations, as well as the fundamental principles to be found in other international labour conventions. The aim of the convention is to address the employment standards of seafarers in the areas of fair wages, contractual terms, working and living conditions, as well as their health and safety on board ships. The purpose of this paper is to provide an in-depth study of MLC Regulation 3.1, specifically on the layout design of the accommodation spaces and possible solutions to meet the new demands as those will certainly affect the crew comfort, health and well-being on board ships.

The approach used includes a review of pre- and post-MLC conventions and regulations. This is then followed by looking at the impact of MLC Regulation 3.1 on new ship design. Possible solutions for new ship design are then proposed.

The findings from the paper were as follows: More flexibility in the form of non-mandatory guidelines and substantial equivalence under MLC. Under MLC, only Special Purpose Ship (SPS) is allowed to accommodate four persons in one room. The requirement for increased height and floor spaces would result in increased gross register tons (GT) for post-MLC built vessels. Impact due to post-MLC requirements would be more unfavourable for the design of smaller vessels below 500 GT than of bigger vessels of up to less than 3,000 GT. Possible solutions include applying for exemptions and substantial equivalents with flag states or registering with a non-ratifying flag state.

This paper has been based on a dissertation carried out for the partial fulfilment of a post-graduate degree. It has not been published in any journal.

The authors analyzed the relationship between chief executive officer (CEO) facial masculinity and the level of corporate social responsibility disclosure (CSRD).

The authors conducted research for 2011–2019, covering companies listed on the Indonesian Stock Exchange. This study used an ordinary least squares regression, the coarsened exact matching (CEM) and propensity score matching (PSM) procedure in testing the hypothesis.

Based on the results of analysis, it is known that CEO facial masculinity is negatively related to corporate CSR disclosure levels. However, this negative relationship can be mitigated through governance mechanisms: the audit committee.

This paper provides implications in the field of research, especially regarding the biological attributes of CEOs in relation to CSR.

As many previous studies focused on the managerial aspect of the CEO, this study focused on the biological aspect of CEO. To the authors’ knowledge, this study is among the first to attempt to investigate this issue in an emerging market.

Nearly 75% of EU buildings are not energy-efficient enough to meet the international climate goals, which triggers the need to develop sustainable construction techniques with high degree of resilience against climate change. In this context, a promising construction technique is represented by ventilated façades (VFs). This paper aims to propose three different VFs and the authors define a novel machine learning-based approach to evaluate and predict their energy performance under different boundary conditions, without the need for expensive on-site experimentations

The approach is based on the use of machine learning algorithms for the evaluation of different VF configurations and allows for the prediction of the temperatures in the cavities and of the heat fluxes. The authors trained different regression algorithms and obtained low prediction errors, in particular for temperatures. The authors used such models to simulate the thermo-physical behavior of the VFs and determined the most energy-efficient design variant.

The authors found that regression trees allow for an accurate simulation of the thermal behavior of VFs. The authors also studied feature weights to determine the most relevant thermo-physical parameters. Finally, the authors determined the best design variant and the optimal air velocity in the cavity.

This study is unique in four main aspects: the thermo-dynamic analysis is performed under different thermal masses, positions of the cavity and geometries; the VFs are mated with a controlled ventilation system, used to parameterize the thermodynamic behavior under stepwise variations of the air inflow; temperatures and heat fluxes are predicted through machine learning models; the best configuration is determined through simulations, with no onerous in situ experimentations needed.

The purpose of this review is to comprehensively consider the material properties and processing of additive titanium alloy and provide a new perspective for the robotic grinding and polishing of additive titanium alloy blades to ensure the surface integrity and machining accuracy of the blades.

At present, robot grinding and polishing are mainstream processing methods in blade automatic processing. This review systematically summarizes the processing characteristics and processing methods of additive manufacturing (AM) titanium alloy blades. On the one hand, the unique manufacturing process and thermal effect of AM have created the unique processing characteristics of additive titanium alloy blades. On the other hand, the robot grinding and polishing process needs to incorporate the material removal model into the traditional processing flow according to the processing characteristics of the additive titanium alloy.

Robot belt grinding can solve the processing problem of additive titanium alloy blades. The complex surface of the blade generates a robot grinding trajectory through trajectory planning. The trajectory planning of the robot profoundly affects the machining accuracy and surface quality of the blade. Subsequent research is needed to solve the problems of high machining accuracy of blade profiles, complex surface material removal models and uneven distribution of blade machining allowance. In the process parameters of the robot, the grinding parameters, trajectory planning and error compensation affect the surface quality of the blade through the material removal method, grinding force and grinding temperature. The machining accuracy of the blade surface is affected by robot vibration and stiffness.

This review systematically summarizes the processing characteristics and processing methods of aviation titanium alloy blades manufactured by AM. Combined with the material properties of additive titanium alloy, it provides a new idea for robot grinding and polishing of aviation titanium alloy blades manufactured by AM.