Search results

Presents a review on implementing finite element methods on supercomputers, workstations and PCs and gives main trends in hardware and software developments. An appendix included at the end of the paper presents a bibliography on the subjects retrospectively to 1985 and approximately 1,100 references are listed.

Thermo-magnetic convective flow analysis under the impact of thermal radiation for heat and entropy generation phenomena is an active research field for understanding the efficiency of thermodynamic systems in various engineering sectors. This study aims to examine the characteristics of convective heat transport and entropy generation within an inverted T-shaped porous enclosure saturated with a hybrid nanofluid under the influence of thermal radiation and magnetic field.

The mathematical model incorporates the Darcy-Forchheimer-Brinkmann model and considers thermal radiation in the energy balance equation. The complete mathematical model has been numerically simulated through the penalty finite element approach at varying values of flow parameters, such as Rayleigh number (Ra), Hartmann number (Ha), Darcy number (Da), radiation parameter (Rd) and porosity value (e). Furthermore, the graphical results for energy variation have been monitored through the energy-flux vector, whereas the entropy generation along with its individual components, namely, entropy generation due to heat transfer, fluid friction and magnetic field, are also presented. Furthermore, the results of the Bejan number for each component are also discussed in detail. Additionally, the concept of ecological coefficient of performance (ECOP) has also been included to analyse the thermal efficiency of the model.

The graphical analysis of results indicates that higher values of Ra, Da, e and Rd enhance the convective heat transport and entropy generation phenomena more rapidly. However, increasing Ha values have a detrimental effect due to the increasing impact of magnetic forces. Furthermore, the ECOP result suggests that the rising value of Da, e and Rd at smaller Ra show a maximum thermal efficiency of the mathematical model, which further declines as the Ra increases. Conversely, the thermal efficiency of the model improves with increasing Ha value, showing an opposite trend in ECOP.

Such complex porous enclosures have practical applications in engineering and science, including areas like solar power collectors, heat exchangers and electronic equipment. Furthermore, the present study of entropy generation would play a vital role in optimizing system performance, improving energy efficiency and promoting sustainable engineering practices during the natural convection process.

To the best of the authors’ knowledge, this study is the first ever attempted detailed investigation of heat transfer and entropy generation phenomena flow parameter ranges in an inverted T-shaped porous enclosure under a uniform magnetic field and thermal radiation.

This paper aims to deal with a modified-based approach for the evaluation of the steady state performances of three-phase self-excited induction generator (SEIG) feeding single-phase load.

Using the symmetrical components method, the proposed approach is based on a modified model of unbalanced three-phase SEIG, which is formulated similarly to the well-known model of balanced three-phase SEIG. Owing to this modified model, the determination of the SEIG operating point amounts to the resolution of two semi-decoupled nonlinear equations for two unknowns; the magnetizing reactance and the per-unit frequency. A simple resolution method based on an iterative two-step technique is used. The results obtained by the proposed approach are compared with those given by a conventional approach and are validated experimentally.

The proposed approach is as accurate as the conventional approach. Further, for the same accuracy degree, the proposed approach permits to speed up the resolution when compared to the conventional approach, as only few iterations are required for the convergence. The proposed approach was also successfully used for the steady state analysis of SEIG under generalized unbalanced loading conditions.

The determination of the operating point of the generator is based on a modified model of the generator and a simple iterative resolution method. The calculation technique can be implemented on low resource controller to provide online voltage control of the SEIG.

The paper contains two main originalities. The first one consists in a modified formulation of the SEIG model under unbalanced loading conditions. The modified formulation permits the use of the well-known model of balanced three-phase SEIG. Unlike previous ones reported in the literature, the proposed model does not require tedious algebraic manipulations. The second originality is the use of two-step technique to solve the equations, which permits to avoid laborious mathematical derivations and manipulating high-order polynomials.

Gives a bibliographical review of the finite element methods (FEMs) applied for the linear and nonlinear, static and dynamic analyses of basic structural elements from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore aims to give the reader an encyclopaedic view on the subject. The bibliography at the end of the paper contains 2,025 references to papers, conference proceedings and theses/dissertations dealing with the analysis of beams, columns, rods, bars, cables, discs, blades, shafts, membranes, plates and shells that were published in 1992‐1995.

This paper aims to numerically investigate the two-dimensional unsteady laminar magnetohydrodynamic bioconvection flow and heat transfer of an electrically conducting non-Newtonian Casson thin film with uniform thickness over a horizontal elastic sheet emerging from a slit in the presence of viscous dissipation. The composite effects of variable heat, mass, nanoparticle volume fraction and gyrotactic micro-organism flux are considered as is hydrodynamic (wall) slip. The Buongiorno nanoscale model is deployed which features Brownian motion and thermophoresis effects. The model studies the manufacturing fluid dynamics of smart magnetic bio-nano-polymer coatings.

The coupled non-linear partial differential boundary-layer equations governing the flow, heat and nano-particle and micro-organism mass transfer are reduced to a set of coupled non-dimensional equations using the appropriate transformations and then solved as an nonlinear boundary value problem with the semi-numerical Liao homotopy analysis method (HAM).Validation with a generalized differential quadrature (GDQ) numerical technique is included.

An increase in velocity slip results in a significant decrement in skin friction coefficient and Sherwood number, whereas it generates a substantial enhancement in Nusselt number and motile micro-organism number density. The computations reveal that the bioconvection Schmidt number decreases the micro-organism concentration and boundary-layer thickness which is attributable to a rise in viscous diffusion rate. Increasing bioconvection Péclet number substantially elevates the temperatures in the regime, thermal boundary layer thickness, nanoparticle concentration values and nano-particle species boundary layer thickness. The computations demonstrate the excellent versatility of HAM and GDQ in solving nonlinear multi-physical nano-bioconvection flows in thermal sciences and furthermore are relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

The numerical study is valid for two-dimensional, unsteady, laminar Casson film flow with nanoparticles over an elastic sheet in presence of variable heat, mass and nanoparticle volume fraction flux. The film has uniform thickness and flow is transpiring from slit which is fixed at origin.

The study has significant applications in the manufacturing dynamics of nano-bio-polymers and the magnetic field control of materials processing systems. Furthermore, it is relevant to application in the synthesis of smart biopolymers, microbial fuel cell coatings, etc.

The originality of the study is to address the simultaneous effects of unsteady and variable surface fluxes on Casson nanofluid transport of gyrotactic bio-convection thin film over a stretching sheet in the presence of a transverse magnetic field. Validation of HAM with a GDQ numerical technique is included. The present numerical approaches (HAM and GDQ) offer excellent promise in simulating such multi-physical problems of interest in thermal thin film rheological fluid dynamics.

This study aims to analyze the impact of fractional derivatives on heat transfer and entropy generation during transient free convection inside various complex porous enclosures, such as triangle, L-shape and square-containing wavy surfaces. These porous enclosures are saturated with Cu-water nanofluid and subjected to the influence of a uniform magnetic field.

In the present study, Darcy’s model is used for the momentum transport equation in the porous matrix. Additionally, the Caputo time fractional derivative is introduced in the energy equation to assess the heat transfer phenomenon. Furthermore, the total entropy generation has been computed by combining the entropy generation due to fluid friction (S_ff), heat transfer (S_ht) and magnetic field (S_mf). The complete mathematical model is further simulated using the penalty finite element method, and the Caputo time derivative term is approximated using the L1 scheme. The study is conducted for various ranges of the Rayleigh number (102≤Ra≤104), Hartmann number (0≤Ha≤20) and fractional order parameter (0<α<1) with respect to time.

It has been observed that the fractional order parameter α governs the characteristics of entropy generation and heat transfer within the selected range of parameters. The Bejan number associated with heat transfer (Be_ht), fluid friction (Be_ff) and magnetic field (Be_mf) further demonstrate the dominance of flow irreversibilities. It becomes evident that the initial evolution state of streamlines, isotherms and local entropy varies according to the choice of α. Additionally, increasing Ra values from 10² to 10⁴ shows that the heat transfer rate increases by 123.8% for a square wavy enclosure, 7.4% for a triangle enclosure and 69.6% for an L-shape enclosure. Moreover, an increase in the value of Ha leads to a reduction in heat transfer rates and entropy generation. In this case, Bemf→1 shows the dominance of the magnetic field irreversibility in the total entropy generation.

Recently, fractional-order models have been widely used to express numerous physical phenomena, such as anomalous diffusion and dispersion in complex viscoelastic porous media. These models offer a more accurate representation of physical reality that classical models fail to capture; this is why they find a broad range of applications in science and engineering.

The fractional derivative model is used to illustrate the flow pattern, heat transfer and entropy-generating characteristics under the influence of a magnetic field. Furthermore, to the best of the author’s knowledge, a fractional-derivative-based mathematical model for the entropy generation phenomenon in complex porous enclosures has not been previously developed or studied.

In this paper, the authors present different methods for reconfigurable finite impulse response (RFIR) filter design. Distributed arithmetic (DA)-based reconfigurable FIR filter design is suitable for software-defined radio (SDR) applications. The main contribution of reconfiguration is reuse of registers, multipliers, adders and to optimize various parameters such as area, power dissipation, speed, throughput, latency and hardware utilizations of flip-flops and slices. Therefore, effective design of building blocks will be optimized for RFIR filter with all the above parameters.

The modified, direct form register structure of FIR filter contributes the reuse concept and allows utilization of less number of registers and parallel computation operations. The disadvantage of DA and other conventional methods is delay increases proportionally with filter length. This is due to different partial products generated by adders. The usage of adder and multipliers in DA-FIR filter restricts the area and power dissipation because of their complexity of generation of sum and carry bits. The hardware implementation time of an adder can be reduced by parallel prefix adder (PPA) usage based on Ling equation. PPA uses shift-add multiplication, which is a repetitive process of addition, and this process is known as Bypass Zero feed multiplicand in direct multiplication, and the proposed technique optimizes area-power product efficiently. The modified DA (MDA)-based RFIR filter is designed for 64 taps filter length (N). The design is developed by using Verilog hardware description language and implemented on field-programmable gate array. Also, this design validates SDR channel equalizer.

Both RFIR and SDR are integrated as single system and implemented on Artix-7 development board of XC7A100tCSG324 and exploited the advantages in area-delay, power-speed products and energy efficiency. The theoretical and practical comparisons have been carried out, and the results are compared with existing DA-RFIR designs in terms of throughput, latency, area-delay, power-speed products and energy efficiency, which are improved by 14.5%, 23%, 6.5%, 34.2% and 21%, respectively.

The DA-based RFIR filter is validated using Chipscope Pro software tool on Artix-7 FPGA in Xilinx ISE design suite and compared constraint parameters with existing state-of-art results. It is also tested the filtering operation by applying the RFIR filter on Audio signals for removal of noisy signals and it is found that 95% of noise signals are filtered effectively.

Topology optimization is a method used for developing optimized geometric designs by distributing material pixels in a given design space that maximizes a chosen quantity of interest (QoI) subject to constraints. The purpose of this study is to develop a problem-agnostic automatic differentiation (AD) framework to compute sensitivities of the QoI required for density distribution-based topology optimization in an unstructured co-located cell-centered finite volume framework. Using this AD framework, the authors develop and demonstrate the topology optimization procedure for multi-dimensional steady-state heat conduction problems.

Topology optimization is performed using the well-established solid isotropic material with penalization approach. The method of moving asymptotes, a gradient-based optimization algorithm, is used to perform the optimization. The sensitivities of the QoI with respect to design variables, required for optimization algorithm, are computed using a discrete adjoint method with a novel AD library named residual automatic partial differentiator (Rapid).

Topologies that maximize or minimize relevant quantities of interest in heat conduction applications are presented. The efficacy of the technique is demonstrated using a variety of realistic heat transfer applications in both two and three dimensions, in conjugate heat transfer problems with finite conductivity ratios and in non-rectangular/non-cuboidal domains.

In contrast to most published work which has either used finite element methods or Cartesian finite volume methods for transport applications, the topology optimization procedure is developed in a general unstructured finite volume framework. This permits topology optimization for flow and heat transfer applications in complex design domains such as those encountered in industry. In addition, the Rapid library is designed to provide a problem-agnostic pathway to automatically compute all required derivatives to machine accuracy. This obviates the necessity to write new code for finding sensitivities when new physics are added or new cost functions are considered and permits general-purpose implementations of topology optimization for complex industrial applications.

The purpose of this study is to present and demonstrate a numerical method for solving chemically reacting flows. These are important for energy conversion devices, which rely on chemical reactions as their operational mechanism, with heat generated from the combustion of the fuel, often gases, being converted to work.

The numerical study of such flows requires the set of Navier-Stokes equations to be extended to include multiple species and the chemical reactions between them. The numerical method implemented in this study also accounts for changes in the material properties because of temperature variations and the process to handle steep spatial fronts and stiff source terms without incurring any numerical instabilities. An all-speed numerical framework is used through simple low-dissipation advection upwind splitting (SLAU) convective scheme, and it has been extended in a multi-component species framework on the in-house density-based flow solver. The capability of solving turbulent combustion is also implemented using the Eddy Dissipation Concept (EDC) framework and the recent k-kl turbulence model.

The numerical implementation has been demonstrated for several stiff problems in laminar and turbulent combustion. The laminar combustion results are compared from the corresponding results from the Cantera library, and the turbulent combustion computations are found to be consistent with the experimental results.

This paper has extended the single gas density-based framework to handle multi-component gaseous mixtures. This paper has demonstrated the capability of the numerical framework for solving non-reacting/reacting laminar and turbulent flow problems. The all-speed SLAU convective scheme has been extended in the multi-component species framework, and the turbulent model k-kl is used for turbulent combustion, which has not been done previously. While the former method provides the capability of solving for low-speed flows using the density-based method, the later is a length-scale-based method that includes scale-adaptive simulation characteristics in the turbulence modeling. The SLAU scheme has proven to work well for unsteady flows while the k-kL model works well in non-stationary turbulent flows. As both these flow features are commonly found in industrially important reacting flows, the convection scheme and the turbulence model together will enhance the numerical predictions of such flows.

The purpose of this paper is to identify and quantify the key components of the overall cost of software development when warranty coverage is given by a developer. Also, the authors have studied the impact of imperfect debugging on the optimal release time, warranty policy and development cost which signifies that it is important for the developers to control the parameters that cause a sharp increase in cost.

An optimization problem is formulated to minimize software development cost by considering imperfect fault removal process, faults generation at a constant rate and an environmental factor to differentiate the operational phase from the testing phase. Another optimization problem under perfect debugging conditions, i.e. without error generation is constructed for comparison. These optimization models are solved in MATLAB, and their solutions provide insights to the degree of impact of imperfect debugging on the optimal policies with respect to software release time and warranty time.

A real-life fault data set of Radar System is used to study the impact of various cost factors via sensitivity analysis on release and warranty policy. If firms tend to provide warranty for a longer period of time, then they may have to bear losses due to increased debugging cost with more number of failures occurring during the warrantied time but if the warranty is not provided for sufficient time it may not act as sufficient hedge during field failures.

Every firm is fighting to remain in the competition and expand market share by offering the latest technology-based products, using innovative marketing strategies. Warranty is one such strategic tool to promote the product among masses and develop a sense of quality in the user’s mind. In this paper, the failures encountered during development and after software release are considered to model the failure process.