Search results

This chapter examines the limitations of the Western world view in Australia and its influence on the built environment. The dominant narrative of colonialism has disregarded alternative ways of being in the world, resulting in a lack of inclusivity for First Nations peoples. To address this issue, there is potential in embracing an alternative world view through design thinking and co-design to develop more culturally and environmentally suitable places through holistic ways of understanding the world to influence future design strategies for knowledge dissemination. This chapter’s contribution is in promoting an alternative perspective that can challenge the dominant world view and create more inclusive and culturally sensitive spaces that reflect the diversity of the community. This is particularly relevant in the current political climate, where there is a growing advocacy for change and a motivation to look to other cultural perspectives, such as those of First Nations peoples. It calls for a paradigm shift in how we think about and synthesise architecture in Australia. This chapter advocates for the acceptance and engagement with First Nations peoples’ world views, particularly in the fields of architecture, design and places that focus on cultural records.

This study aims at investigating two-dimensional laminar flow of power-law fluids around three unconfined side-by-side cylinders.

The numerical study is performed by solving the governing (continuity and momentum) equations using a finite volume-based code ANSYS Fluent. The numerical results have been presented for different combinations of the governing dimensionless parameters (dimensionless spacing, 1.2 = L = 4; Reynolds number, 0.1 = Re = 100; power-law index, 0.2 = n = 1.8). The dependence of the kinematic and macroscopic characteristics of the flow such as streamline patterns, distribution of the surface pressure coefficient, total drag coefficient with its components (pressure and friction) and total lift coefficient on these dimensionless parameters has been discussed in detail.

It is found that the separation of the flow and the apparition of the wake region accelerate as the dimensionless spacing decreases, the number of the cylinder increases and/or the fluid behavior moves from shear-thinning to Newtonian then to shear-thickening behavior. In addition, the distribution of the pressure coefficient on the surface of the cylinders presents a complex dependence on the fluid behavior index and Reynolds number when the dimensionless spacing between two adjacent cylinders is varied. At low Reynolds numbers, the drag coefficient of shear-thinning fluids is stronger than that of Newtonian fluids; this tendency decreases progressively with increasing of Re until a critical value; beyond the critical Re, the opposite trend is observed. The lift coefficient of the middle cylinder is null, whereas, the exterior cylinders experience opposite lift coefficients, which show a complex dependence on the dimensionless spacing, the Reynolds number and the power-law index.

The flow over bluff bodies is a practical engineering problem. In the literature, it can be seen that the previous studies on non-Newtonian fluids are limited to the flow over one or two cylinders (effect of an odd number of cylinders on each other). Besides that, the available results concerning the flow of Newtonian fluids over three cylinders are limited to the high Reynolds numbers region only. However, this work treats the flow of non-Newtonian power-law fluids past three circular cylinders in side-by-side arrangements under a wide range of Re. The outcome of the present study demonstrates that the augmentation of the geometry complexity to three cylinders (effect of pair surrounding cylinders on the surrounded ones in what concerns Von Karman Street phenomenon) causes a drastic change in the flow patterns and in the macroscopic characteristics. The present results may be used to predict the flow behavior around multiple side-by-side cylinders.

The purpose of this study is to design a closed hydrostatic guideway has the ability to resist large-side load, pitch moments and yaw moments, has good stiffness and damping characteristics, and provides certain beneficial guidance for the design of large-span closed hydrostatic guideway on the basis of providing a large vertical load bearing capacity.

The Reynolds’ equation and flow continuity equation are solved simultaneously by the finite difference method, and the perturbation method and the finite disturbance method is used for calculating the dynamic characteristics. The static and dynamic characteristics, including recess pressure, flow of lubricating oil, carrying capacity, pitch moment, yaw moment, dynamic stiffness and damping, are comprehensively analyzed.

The designed closed hydrostatic guideway has the ability to resist large lateral load, pitch moment and yaw moment and has good stiffness and damping characteristics, on the basis of being able to provide large vertical carrying capacity, which can meet the application requirements of heavy two-plate injection molding machine (TPIMM).

This paper researches static and dynamic characteristics of a large-span six-slider closed hydrostatic guideway used in heavy TPIMM, emphatically considering pitch moment and yaw moment. Some useful guidance is given for the design of large-span closed hydrostatic guideway.

This study investigates the influence of organizational social capital (OSC) on the social and economic performance of social enterprises (SEs) in Greece and the mediating role of social entrepreneurship orientation (SEO) in these relationships.

A theoretical framework was developed integrating resource-based theory, OSC theory and behavioral entrepreneurship theory. The data were collected from 345 Greek SEs and structural equation modeling (SEM) with bootstrap analysis was employed to estimate path coefficients.

This study shows that OSC positively impacts SEs’ social and economic performance, while SEO mediates only the relationship between OSC and SEs’ social performance. This research offers insights for scholars, practitioners and policymakers in social entrepreneurship by highlighting the significance of OSC and SEO.

This study contributes to the literature on SEs by integrating resource-based theory, OSC theory and behavioral entrepreneurship theory, presenting a novel comprehensive theoretical framework for understanding SEs’ performances. Additionally, the study advances the understanding of SEO as a mediator in the relationship between OSC and SEs’ social and economic performance. The unique focus on the Greek context provides a valuable setting for examining the relationships among OSC, SEO and SEs’ performances.

This study aims to examine the influences of causation strategy, entrepreneurial orientation and social orientation on the social enterprise’s (SE) financial performance and social achievement.

The partial least square structural equational modelling technique was used to analyse survey data collected from Malaysian and Singaporean SEs (n = 96).

The findings have important guidance for policymakers, social entrepreneurs and researchers interested in promoting the growth and impact of SEs in emerging regions.

This study offers several practical implications for social entrepreneurs who want to achieve both financial and social success.

There is no widely accepted performance framework for SE. Most research in SE is descriptive and conceptual in nature. Larger data sets from the nascent ecology of SE are even scarcer. This study developed and examined a performance framework specifically designed to meet the needs of SEs operating in the emerging region.

The purpose of this study is to solve the Reynolds equation for finite journal bearings by using the physics-informed neural networks (PINNs) method. As a meshless method, it is unnecessary to use big data to train the neural networks, but to satisfy the Reynolds equation and the corresponding boundary conditions by using the known physics information.

Here, the boundary conditions are enforced through the loss function firstly, i.e. the soft constrain method. After this, an equation was constructed to build a surrogate model for satisfying the corresponding boundary conditions naturally, i.e. the hard constrain method.

For the soft one, in brief, the pressure results agree well with existing results, apart from the ones on the boundaries. While for the hard one, it can be noted that the discrepancies on the boundaries are reduced significantly.

The PINNs method is used to solve the Reynolds equation for finite journal bearings, and the error values on the boundaries for the results of the soft constrain method are improved by using the hard constrain method. Therefore, the hard constraint maybe also a good option when the pressure results on the boundaries are emphasized.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-02-2023-0045/

Efficient thermal management of central processing unit (CPU) cooling systems is vital in the context of advancing information technology and the demand for enhanced data processing speeds. This study aims to explore the thermal performance of a CPU cooling setup using a cylindrical porous metal foam heat sink.

Nanofluid flow through the metal foam is simulated using the Darcy–Brinkman–Forschheimer equation, accounting for magnetic field effects. The temperature distribution is modeled through the local thermal equilibrium equation, considering viscous dissipation. The problem’s governing partial differential equations are solved using the similarity method. The CPU’s hot surface serves as a solid wall, with nanofluid entering the heat sink as an impinging jet. Verification of the numerical results involves comparison with existing research, demonstrating strong agreement across numerical, analytical and experimental findings. Ansys Fluent® software is used to assess temperature, velocity and streamlines, yielding satisfactory results from an engineering standpoint.

Investigating critical parameters such as Darcy number (10⁻⁴ ≤ Da_D ≤ 10⁻²), aspect ratio (0.5 ≤ H/D ≤ 1.5), Reynolds number (5 ≤ Re_D,bf ≤ 3500), Eckert number (0 ≤ EC_bf ≤ 0.1) , porosity (0.85 ≤ ε ≤ 0.95), Hartmann number (0 ≤ Ha_D,bf ≤ 300) and the volume fraction of nanofluid (0 ≤ φ ≤ 0.1) reveals their impact on fluid flow and heat sink performance. Notably, Nusselt number will reduce 45%, rise 19.2%, decrease 14.1%, and decrease 0.15% for Reynolds numbers of 600, with rising porosity from 0.85 to 0.95, Darcy numbers from 10⁻⁴ to 10⁻², Eckert numbers from 0 to 0.1, and Hartman numbers from 0 to 300.

Despite notable progress in studying thermal management in CPU cooling systems using porous media and nanofluids, there are still significant gaps in the existing literature. First, few studies have considered the Darcy–Brinkman–Forchheimer equation, which accounts for non-Darcy effects and the flow and geometric interactions between coolant and porous medium. The influence of viscous dissipation on heat transfer in this specific geometry has also been largely overlooked. Additionally, while nanofluids and impinging jets have demonstrated potential in enhancing thermal performance, their utilization within porous media remains underexplored. Furthermore, the unique thermal and structural characteristics of porous media, along with the incorporation of a magnetic field, have not been fully investigated in this particular configuration. Consequently, this study aims to address these literature gaps and introduce novel advancements in analytical modeling, non-Darcy flow, viscous dissipation, nanofluid utilization, impinging jets, porous media characteristics and the impact of a magnetic field. These contributions hold promising prospects for improving CPU cooling system thermal management and have broader implications across various applications in the field.

The purpose of this study is to do a numerical analysis of the jet to a body filled with phase change material (PCM). The melting of the PCM filled body was investigated by the hot jet flow. Four different values of the Reynolds number were taken, ranging from 5 × 103 = Re = 12.5 103. Water, Al₂O₃ 1%, Al₂O₃ 2% and hybrid nanofluid (HNF; Al₂O₃–Ag mixture) were used as fluid types and the effects of fluid type on melting were investigated. At 60 °C, the jet stream was impinged on the PCM filled body at different Reynolds numbers.

Two-dimensional analysis of melting of PCM inserted A block via impinging turbulent slot jet is numerically studied. Governing equations for turbulent flow are solved by using the finite element method via analysis and system fluent R2020.

The obtained results showed that the best melting occurred when the Reynolds number increased and the HNF was used. However, the impacts of using alumina-water nanofluid were slight. At Re = 12,500, phase completion time was reduced by about 13.77% when HNF was used while this was only 3.93% with water + alumina nanofluid as compared to using only water at Re = 5,000. In future studies, HNF concentrations will change the type of nanoenhanced PCMs. In addition, the geometry and jet parameters of the PCM-filled cube can be changed.

Effects of impinging jet onto PCM filled block and control of melting via impinging hot jet of PCM. Thus, novelty of the work is to control of melting in a block by impinging hot jet and nanoparticles.

The purpose of the study is to numerically investigate the characteristics of laminar heat transfer and fluid flow in a double tube heat exchanger (DTHE) using water-aluminum oxide (Al₂O₃) nanofluid. The study examines the effects of nanofluid in both counter and parallel flow configurations. Furthermore, an exergy analysis is conducted to assess the impact of nanofluid on exergy destruction.

The single-phase method has been used for Al₂O₃ nanoparticles in water as base fluid in a laminar regime for Reynolds numbers from 400 to 2,000. The effects of nanoparticle volume fractions (0 to 0.1), Nusselt number, Reynolds number, heat transfer coefficient, pressure drop, performance evaluation criteria (PEC) and the impact of counter and parallel flow direction have been studied.

The findings indicate that the incorporation of nanoparticles into the water enhances the heat transfer rate of DTHE. This enhancement is attributed to the improved thermal properties of the working fluid and its impact on the thermal boundary layer. Nusselt number, heat transfer coefficient, and PEC increase by approximately 19.5%, 58% and 1.2, respectively, in comparison to pure water. Conversely, the pressure drop experiences a 5.3 times increase relative to pure water. Exergy analysis reveals that nanofluids exhibit lower exergy destruction compared to pure water. The single-phase method showed better agreement with the experimental results compared to the two-phase method.

Dimensionless correlations were derived and validated with experimental and numerical results for the Nusselt number and PEC for both counter and parallel flow configurations based on the Reynolds number and nanoparticles volume fraction with high accuracy to predict the performance of DTHE without performing time-consuming simulations. Also, an exergy analysis was performed to compare the exergy destruction between nanofluid and pure water.