Search results

This paper aims to investigate the thermal performance of equivalent square and circular thermal systems and compare the heat transport and irreversibility of magnetohydrodynamic (MHD) nanofluid flow within these systems.

The research uses a constraint-based approach to analyze the impact of geometric shapes on heat transfer and irreversibility. Two equivalent systems, a square cavity and a circular cavity, are examined, considering identical heating/cooling lengths and fluid flow volume. The analysis includes parameters such as magnetic field strength, nanoparticle concentration and accompanying irreversibility.

This study reveals that circular geometry outperforms square geometry in terms of heat flow, fluid flow and heat transfer. The equivalent circular thermal system is more efficient, with heat transfer enhancements of approximately 17.7%. The corresponding irreversibility production rate is also higher, which is up to 17.6%. The total irreversibility production increases with Ra and decreases with a rise in Ha. However, the effect of magnetic field orientation (γ) on total EG is minor.

Further research can explore additional geometric shapes, orientations and boundary conditions to expand the understanding of thermal performance in different configurations. Experimental validation can also complement the numerical analysis presented in this study.

This research introduces a constraint-based approach for evaluating heat transport and irreversibility in MHD nanofluid flow within square and circular thermal systems. The comparison of equivalent geometries and the consideration of constraint-based analysis contribute to the originality and value of this work. The findings provide insights for designing optimal thermal systems and advancing MHD nanofluid flow control mechanisms, offering potential for improved efficiency in various applications.

The purpose is to derive the most effective place in the air for an aerial robot, viz., drone to use as an alternative communication system during disasters.

In this technology-driven era, various concepts are becoming the area of interest for multiple researchers. Drone technology is also one of them. The researchers, with interest in drones, are therefore trying to understand the various uses of employing drones in diverse applications which are mind-boggling, starting from civil applications (viz., an inspection of power lines, counting wildlife, delivering medical supplies to inaccessible regions, forest fire detection, and landslide measurement) to military applications (viz., real-time monitoring, surveillance, patrolling, and demining). However, one area where its usage is still to be exploited in many countries is using drones as a relay when communication lines are disrupted due to natural calamities. This will be particularly helpful in rescuing the affected people as the aerial node will enable them to communicate to the rescue team using mobiles/ordinary landline telephones even when regular communication towers are destroyed due to disastrous natural calamities, for example, tsunamis, earthquakes, and floods. Various algorithms, namely, water filling algorithm, advanced water filling algorithm, equal power distribution algorithm, and particle swarm optimization, were therefore studied and analyzed using simulation in addition to various path loss models to realize the desired place for an aerial robot, viz., drone in the air, which will eventually be used as an alternative communication system for badly hit ground users due to any disaster.

It was found that the effective combination of the water filling algorithm and particle swarm optimization algorithm may be done to place the drone in the air to increase the overall throughput of the affected ground users.

The research is original. None of the parts of this research paper has been published anywhere.

The purpose is to design a system in which drones can control traffic most effectively using a deep learning algorithm.

Drones have now started entry into each facet of life. The entry of drones has made them a subject of great relevance in the present technological era. The span of drones is, however, very broad due to various kinds of usages leading to different types of drones. Out of the many usages, one usage which is presently being widely researched is traffic monitoring as traffic monitoring can hover over a particular area. This paper specifically brings out the basic algorithm You Look Only Once (YOLO) which may be used for identifying the vehicles. Consequently, using deep learning YOLO algorithm, identification of vehicles will, therefore, help in easy regulation of traffic in streetlights, avoiding accidents, finding out the culprit drivers due to which traffic jam would have taken place and recognition of a pattern of traffic at various timings of the day, thereby announcing the same through radio (namely, Frequency Modulation (FM)) channels, so that people can take the route which is the least jammed.

The study found that the object(s) detected by the deep learning algorithm is almost the same as if seen from a naked eye from the top view. This led to the conclusion that the drones may be used for traffic monitoring, in the days to come, which was not the case earlier.

The main research content and key algorithm have been introduced. The research is original. None of the parts of this research paper has been published anywhere.

The purpose of this study is to learn how the incorporation and use of leanness, agility and innovation in Indian manufacturing micro, small and medium enterprises (MSMEs) affect their bottom lines and how much these factors contribute to the MSMEs’ ability to meet their long-term sustainability goals.

The suggested model was subjected to data validation and additional empirical validation using a sample of 411 Indian manufacturing MSMEs. The analysis of construct measures is conducted through the utilization of confirmatory factor analysis, a statistical technique that is grounded in the theoretical framework of structural equation modeling (SEM). In addition, path model analysis was applied for the purpose to validate the assumptions that were included in the structural models.

Consistent with the proposed model, the findings of this study demonstrate that leanness, agility and innovation have a substantial favorable impact on the sustainability of a company’s performance. These findings may be helpful in gaining professionals, academics and policymakers to acknowledge the significance of leanness, agility and innovation in enhancing the long-term sustainability of MSMEs and enhancing the overall performance of a particular company. This research excluded the service industries-based research papers.

Many research in the field of manufacturing industries that have adopted leanness, agility, innovativeness and sustainability as individual approaches or as a collective methodology of two or more were considered in the current study. This research excluded the service industries-based research papers.

This literature review has recognized and analyzed various dimensions and roles of leanness, agility, innovativeness and sustainability that are prevalent in manufacturing industries that include the positive and negative effects on the performance of the industries. The research enlightens the path and shows future directions for research to develop efficient, effective and sustainable manufacturing industries.

By promoting the concept of focusing on the “human factor”, namely, stakeholder perspectives, the MSME sector is propagating a strategy that moves away from an excessive focus on technology and toward a more humane one. Through the application of the three key concepts of leanness, agility and innovation, this work aims to create a framework for measuring the sustainability performance of micro-, small- and medium-sized enterprises (MSMEs), with the ultimate goal of assisting the country in achieving the Sustainable Development Goals in the fields of industry, innovation and infrastructure by supporting environmentally friendly and resource-conserving businesses that give back to society and the natural environment.

The objective of this research is to assess the importance and effectiveness of integrating various approaches such as leanness, agility, innovativeness and sustainability within the framework of manufacturing micro, small, and medium enterprises (MSMEs). The authors hope that by going further into these concepts, they will be able to broaden their understanding and get a more comprehensive insight into the role that these concepts play and how they might be successfully used within this environment.

Heat exchangers (HEs) which provide heat transfer and transfer energy through direct or indirect contact between fluids have an essential role in many processes as a part of various industries from pharmaceutical production to electronic devices. Using nanofluid as working fluid and integrating different types of turbulators could be used to upgrade the thermal effectiveness of HEs. Recently, to obtain more increment in thermal effectiveness, hybrid nanofluids are used that are prepared by mixing two or more various nanoparticles. The purpose of this experimental and numerical study is investigating different scenarios for improving the effectiveness of a concentric U-tube type HE.

In the numerical section of this study, different turbulator modifications, including circular and quarter circular rings, were modeled to determine the effect of adding turbulator on thermal performance. In addition, Al₂O₃/water and SiO₂/water single and Al₂O₃–SiO₂/water hybrid nanofluids were experimentally tested in an unmodified concentric U-tube HE in two different modes, including counter flow and parallel flow. Al₂O₃–SiO₂/water hybrid nanofluid was prepared at 2% (wt./wt.) particle ratio and compared with Al₂O₃/water and SiO₂/water single type nanofluids at same particle ratios and with distilled water.

Numerical modeling findings exhibited that integrating turbulators to the concentric tube type HE caused to raise in the effectiveness by improving heat transfer area. Also, experimental results indicated that using both hybrid and single type nanofluids notably upgraded the thermal performance of the concentric U-tube HE. Integrating turbulators cannot be an effective alternative in a concentric U-tube type HE with lower diameter because of raise in pressure drop. Numerically achieved findings exhibited that using quarter circular turbulators decreased pressure drop in comparison with circular turbulators. According to the experimental outcomes, using hybrid Al₂O₃–SiO₂/water nanofluid leads to obtain more thermal performance in comparison with single type nanofluids. The highest increment in overall heat transfer coefficient of HE by using Al₂O₃–SiO₂/water nanofluid achieved as 58.97% experimentally.

The overall outcomes of the current research exhibited the positive impacts of using hybrid nanofluid and integrating turbulators. In this empirical and numerical survey, numerical simulations were performed to specify the impact of applying different turbulators and hybrid nanofluid on the flow and thermal characteristics in a concentric U-tube HE. The achieved outcomes exhibited that using hybrid nanofluid can notably increase the thermal performance with negligible pressure drop in comparison with two different turbulator modifications.

In recent years, the topic of women's entrepreneurship has gained increasing attention from researchers and policymakers. Its role in economic growth and development has been widely recognized in several studies. However, the relationship between gender in entrepreneurship and innovation is an underexplored aspect in particular at a country-level perspective. This paper aims to answer the following question: Does female entrepreneurship impact innovation at a national level?

Using a panel dataset of 35 Organization for Economic Co-operation and Development (OECD) member countries over the period 2002–2019, the authors carried out a comprehensive econometric analysis, based on the fixed-effect model, the random-effect model and the feasible generalized least squares estimator, as well as a battery of tests to prevent problems of multicollinearity, heteroscedasticity and autocorrelation of the error terms. In doing so, the authors found consistent and robust results on the linear and nonlinear relationship between women's entrepreneurship and innovation, using selected country indicators from the Global Entrepreneurship Monitor (GEM) consortium, the Worldwide Governance Indicators (WGI) and the World Development Indicators (WDI), including female self-employment, female nascent entrepreneurship and R&D investment and controlling for the same relationships in the case of men's entrepreneurship.

This study shows that the level of R&D investment, which according to the literature can be considered as a proxy of innovation, is higher when the level of women's entrepreneurship is low. However, exploring more in depth this relationship and the relationship between male entrepreneurship and innovation, the authors found two important and new results. The first one involves the different impact on R&D investment of female self-employment and female nascent entrepreneurship. In particular, female self-employment appears to have a linear negative impact on the R&D, while the impact of female nascent entrepreneurship is statistically nonsignificant. The second one affects the nonlinearity of the negative effect, suggesting that very different challenges are possible at different levels of women's entrepreneurship. In addition, analyzing the role of human capital in the relationship between R&D investment and women entrepreneurship, it emerges that higher education (as the main component of human capital) makes early-stage women's entrepreneurship more technologically consuming, which promotes R&D investment. A higher level of education lessens the significance of the negative relationship between the simplest type of women entrepreneurship (female self-employment) and R&D investment.

The originality of the study is that it provides new evidence regarding the link between women's entrepreneurship and innovation at the macro level, with a specific focus on self-employed women entrepreneurs and early-stage women entrepreneurship. In this sense, to the best of the authors' knowledge, this study is among the few showing a nonlinear relationship between women's entrepreneurship and country-level innovation and a negative impact only in the case of female self-employment. Moreover, this study has relevant implications from a policymaking perspective, in terms of promoting more productive women's entrepreneurship.

Land value varies at a micro level depending on the location’s economic, geographical and political determinants. The purpose of this study is to present a comprehensive assessment of the determinants affecting land value in the Indian city of Thiruvananthapuram in the state of Kerala.

The global influence of the identified 20 explanatory variables on land value is measured using the traditional hedonic price modeling approach. The localized spatial variations of the influencing parameters are examined using the non-parametric regression method, geographically weighted regression. This study used advertised land value prices collected from Web sources and screened through field surveys.

Global regression results indicate that access to transportation facilities, commercial establishments, crime sources, wetland classification and disaster history has the strongest influence on land value in the study area. Local regression results demonstrate that the factors influencing land value are not stationary in the study area. Most variables have a different influence in Kazhakootam and the residential areas than in the central business district region.

This study confirms findings from previous studies and provides additional evidence in the spatial dynamics of land value creation. It is to be noted that advanced modeling approaches used in the research have not received much attention in Indian property valuation studies. The outcomes of this study have important implications for the property value fixation of urban Kerala. The regional variation of land value within an urban agglomeration shows the need for a localized method for land value calculation.

This study aims to delve into the coupled mixed convective heat transport process within a grooved channel cavity using CuO-water nanofluid and an inclined magnetic field. The cavity undergoes isothermal heating from the bottom, with variations in the positions of heated walls across the grooved channel. The aim is to assess the impact of heater positions on thermal performance and identify the most effective configuration.

Numerical solutions to the evolved transport equations are obtained using a finite volume method-based indigenous solver. The dimensionless parameters of Reynolds number (1 ≤ Re ≤ 500), Richardson number (0.1 ≤ Ri ≤ 100), Hartmann number (0 ≤ Ha ≤ 70) and magnetic field inclination angle (0° ≤ γ ≤ 180°) are considered. The solved variables generate both local and global variables after discretization using the semi-implicit method for pressure linked equations algorithm on nonuniform grids.

The study reveals that optimal heat transfer occurs when the heater is positioned at the right corner of the grooved cavity. Heat transfer augmentation ranges from 0.5% to 168.53% for Re = 50 to 300 compared to the bottom-heated case. The magnetic field’s orientation significantly influences the average heat transfer, initially rising and then declining with increasing inclination angle. Overall, this analysis underscores the effectiveness of heater positions in achieving superior thermal performance in a grooved channel cavity.

This concept can be extended to explore enhanced thermal performance under various thermal boundary conditions, considering wall curvature effects, different geometry orientations and the presence of porous structures, either numerically or experimentally.

The findings are applicable across diverse fields, including biomedical systems, heat exchanging devices, electronic cooling systems, food processing, drying processes, crystallization, mixing processes and beyond.

This work provides a novel exploration of CuO-water nanofluid flow in mixed convection within a grooved channel cavity under the influence of an inclined magnetic field. The influence of different heater positions on thermomagnetic convection in such a cavity has not been extensively investigated before, contributing to the originality and value of this research.