Search results

The purpose of this study is to investigate the two-dimensional unsteady inclined stagnation point flow and thermal transmission of Maxwell fluid on oscillating stretched/contracted plates. First, based on the momentum equation at infinity, pressure field is modified by solving first-order differential equation. Meanwhile, thermal relaxation characteristic of fluid is described by Cattaneo–Christov thermal diffusion model.

Highly coupled model equations are transformed into simpler partial differential equations (PDE) via appropriate dimensionless variables. The approximate analytical solutions of unsteady inclined stagnation point flow on oscillating stretched and contracted plates are acquired by homotopy analysis method for the first time, to the best of the authors’ knowledge.

Results indicate that because of tensile state of plate, streamline near stagnation point disperses to both sides with stagnation point as center, while in the case of shrinking plate, streamline near stagnation point is concentrated near stagnation point. The enhancement of velocity ratio parameter leads to increasing of pressure variation rate, which promotes flow of fluid. In tensile state, surface friction coefficient on both sides of stagnation point has opposite symbols; when the plate is in shrinkage state, there is reflux near the right side of the stagnation point. In addition, although the addition of unsteady parameters and thermal relaxation parameters reduce heat transfer efficiency of fluid, heat transfer of fluid near the plate can also be enhanced by considering thermal relaxation effect when plate shrinks.

First, approximate analytical solutions of unsteady inclined stagnation point flow on oscillating stretched and contracted plates are researched, respectively. Second, pressure field is further modified. Finally, based on this, thermal relaxation characteristic of fluid is described by Cattaneo–Christov thermal diffusion model.

In various kinds of materials processes, heat and mass transfer control in nuclear phenomena, constructing buildings, turbines and electronic circuits, etc., there are numerous problems that cannot be enlightened by uniform wall temperature. To explore such physical phenomena researchers incorporate non-uniform or ramped temperature conditions at the boundary, the purpose of this paper is to achieve the closed-form solution of a time-dependent magnetohydrodynamic (MHD) boundary layer flow with heat and mass transfer of an electrically conducting non-Newtonian Casson fluid toward an infinite vertical plate subject to the ramped temperature and concentration (RTC). The consequences of chemical reaction in the mass equation and thermal radiation in the energy equation are encompassed in this analysis. The flow regime manifests with pertinent physical impacts of the magnetic field, thermal radiation, chemical reaction and heat generation/absorption. A first-order chemical reaction that is proportional to the concentration itself directly is assumed. The Rosseland approximation is adopted to describe the radiative heat flux in the energy equation.

The problem is formulated in terms of partial differential equations with the appropriate physical initial and boundary conditions. To make the governing equations dimensionless, some suitable non-dimensional variables are introduced. The resulting non-dimensional equations are solved analytically by applying the Laplace transform method. The mathematical expressions for skin friction, Nusselt number and Sherwood number are calculated and expressed in closed form. Impacts of various associated physical parameters on the pertinent flow quantities, namely, velocity, temperature and concentration profiles, skin friction, Nusselt number and Sherwood number, are demonstrated and analyzed via graphs and tables.

Graphical analysis reveals that the boundary layer flow and heat and mass transfer attributes are significantly varied for the embedded physical parameters in the case of constant temperature and concentration (CTC) as compared to RTC. It is worthy to note that the fluid velocity is high with CTC and lower for RTC. Also, the fluid velocity declines with the augmentation of the magnetic parameter. Moreover, growth in thermal radiation leads to a declination in the temperature profile.

The proposed model has relevance in numerous engineering and technical procedures including industries related to polymers, area of chemical productions, nuclear energy, electronics and aerodynamics. Encouraged by such applications, the present work is undertaken.

Literature review unveils that sundry studies have been carried out in the presence of uniform wall temperature. Few studies have been conducted by considering non-uniform or ramped wall temperature and concentration. The authors are focused on an analytical investigation of an unsteady MHD boundary layer flow with heat and mass transfer of non-Newtonian Casson fluid past a moving plate subject to the RTC at the plate. Based on the authors’ knowledge, the present study has, so far, not appeared in scientific communications. Obtained analytical solutions are verified by considering particular cases of the published works.

The purpose of this paper is to highlight the studies of momentum and transmission of heat on mixed convection boundary layer Darcy‒Forchheimer flow of Casson liquid over a linear extending surface in a porous medium. The belongings of homogeneous‒heterogeneous retorts are also affianced. The mechanism of heat transmission is braced out in the form of Cattaneo‒Christov heat flux. Appropriate restorations are smeared to revolutionize coupled nonlinear partial differential equations conforming to momentum, energy and concentration of homogeneous‒heterogeneous reaction equations into coupled nonlinear ordinary differential equations (ODEs).

Numerical elucidations of the transmogrified ODEs are accomplished via a dexterous and trustworthy scheme, namely optimal homotopy analysis method. The convergence of planned scheme is exposed with the support of error table.

The exploration of mixed convection Darcy‒Forchheimer MHD boundary layer flow of incompressible Casson fluid by the linear stretched surface with Cattaneo‒Christov heat flux model and homogeneous‒heterogeneous reactions is checked in this research. Imitations of the core subsidized flow parameters on velocity, temperature and concentration of homogeneous‒heterogeneous reactions solutions are conscripted. From the recent deliberation, remarkable annotations are as follows: non-dimensional velocities in x_a− and x_b− directions shrink, whereas the non-dimensional temperature upsurges when the Casson fluid parameter ameliorates. Similar impact of Casson fluid parameter, magnetic parameter, mixed convection parameter, inertia parameter, and porosity parameter is observed for both the components of velocity field. An escalation in magnetic parameter shows the opposite attitude of temperature field as compared with velocity profile. Similar bearing of Casson fluid parameter is observed for both temperature and velocity fields. Enhancement in concentration rate is observed for growing values of (N_s) and (Sc), and it reduces for (k₁). Both temperature and concentration of homogeneous‒heterogeneous upturn by mounting the magnetic parameter. Demeanor of magnetic parameter, Casson fluid parameter, heat generation parameter is opposite to that of Prandtl number and thermal relaxation parameter on temperature profile.

In many industrial and engineering applications, the current exploration is utilized for the transport of heat and mass in any system.

As far as novelty of this work is concerned this is an innovative study and such analysis has not been considered so far.

This study aims to propose a new methodology to develop bistable textile structures with two different states of heat and moisture transfer by taking inspiration from the animal kingdom. Bionic approaches controlling thermoregulation were analyzed, implemented at the textile level and evaluated. Therefore, 4D technology has been applied. This paper presents all the steps necessary for transferring bionic concepts on the textile level by using rapid prototyping and the 4D-textile approach.

Concepts for thermoregulation are derived from bionic approaches and are evaluated by the metrics of low cost and high adaptability to quickly changing needs. Subsequently, bionic approaches were implemented as prototypes by printing on a pre-stretched textile using an fused deposition modeling printer. The printed patterns and properties were investigated, and the effects of each parameter were evaluated. Finally, the prototypes were tested by comparing the data from the thermal imaging camera of the two bistable states.

This paper presents two printing pattern concepts for creating textiles with two different states of thermal and moisture transfer. The results show that bionic approaches for thermoregulation transferred to the textile level are possible and quickly put into practice through 3D-printing technology as a tool for rapid prototyping.

The presented methodology fills the technological gap for quickly transferring bionic approaches to the textile level using the 4D-Textile technology. In addition, the possibility of generating two bistable states with different thermophysiological properties in one textile and switching between them easily was shown.

Argos Electronics Ltd are pleased to announce the appointment of David E. Skertchly to the position of Quality Assurance Manager. This strengthens Argos technical and quality capability as Mr Skertchly has joined them from Marconi Space Systems where his work encompassed production and management aspects of hardware for the Exosat, Marecs, Meteosat and ERS 1 Satellite projects.

Complex material requirements for high‐technology applications increasingly demand the use of hybrid material structures with properties tailored to the lines of loading. Textile‐reinforced multilayer composite structures are particularly suitable for the production of component structures in an optimised lightweight construction. In the loading case, however, delaminating phenomena occur between the individual layers due to the low interlaminar shear strength. The appropriate techniques and machines of the ready‐made‐clothing technology allow the specific sewing‐up of the semifinished textile products into a three‐dimensionally reinforced multilayer composite structure; the setting of a load‐adapted and failure‐tolerant characteristic of properties being possible in the z‐direction through a versatile variation of sewing parameters. Moreover, the sewing technology makes possible a ready‐made‐clothing‐technological preassembly of components of semi‐finished products, and thus can perform position‐fixing functions in the consolidation of the composites. The ready‐made‐clothing process is divided into sub‐processes like product development, preparation of cutting, cutting, connecting and forming as well as packaging and shipping. The technical procedures and machines applied are chosen from economic aspects. Besides the large number of pieces, extreme thickness of the textile products of up to 20 mm and the required sewing precision demand precise and reproducible manufacturing processes.

This study aims to evaluate blast loads on and the response of submerged structures.

An arbitrary Lagrangian–Eulerian method is developed to model fluid–structure interaction (FSI) problems of close-in underwater explosions (UNDEX). The “fluid” part provides the loads for the structure considers air, water and high explosive materials. The spatial discretization for the fluid domain is performed with a second-order vertex-based finite volume scheme with a tangent of hyperbola interface capturing technique. The temporal discretization is based on explicit Runge–Kutta methods. The structure is described by a large-deformation Lagrangian formulation and discretized via finite elements. First, one-dimensional test cases are given to show that the numerical method is free of mesh movement effects. Thereafter, three-dimensional FSI problems of close-in UNDEX are studied. Finally, the computation of UNDEX near a ship compartment is performed.

The difference in the flow mechanisms between rigid targets and deforming targets is quantified and evaluated.

Cavitation is modeled only approximately and may require further refinement/modeling.

The results demonstrate that the proposed numerical method is accurate, robust and versatile for practical use.

Better design of naval infrastructure [such as bridges, ports, etc.].

To the best of the authors’ knowledge, this study has been conducted for the first time.

WITH the approach of the European Management Conference at Torquay and the news that The Work Study Society will be holding a one‐day Conference in London on October 14th and another in Hereford on November 25th it looks as if work study men will have plenty of opportunities of exchanging points of view this autumn.

The Equal Pay Act 1970 (which came into operation on 29 December 1975) provides for an “equality clause” to be written into all contracts of employment. S.1(2) (a) of the 1970 Act (which has been amended by the Sex Discrimination Act 1975) provides:

PROJECTS launched early in National Productivity Year are still producing useful results. One of the most commendable of these was the circulation of a questionnaire which reached manufacturing firms in Monmouthshire. It was the idea of No. 3 sub‐committee of the country's Productivity Study Group.