Search results

The rock drill’s drill tail experiences high-frequency fretting simultaneously in the rotational and axial directions. Due to the complex working characteristics and the low viscosity of the water medium, the pure water seal is susceptible to damage and failure. The purpose of this paper is to enhance the water seal’s performance.

The Y-shaped seal ring is modeled and simulated using orthogonal testing. Through analysis of the impact of various seal section parameters on sealing performance, the maximum contact stress and maximum Von Mises stress are selected as indicators of sealing effectiveness.

The maximum contact stress is proportional to lip thickness and chamfer length but inversely proportional to lip length. Meanwhile, the maximum Von Mises stress is directly influenced by lip depth and the included angle of the lip and drill tail but is inversely proportional to the lip thickness. The enhanced Y-shaped water seal sees reductions of 15% and 45% in maximum contact stress and maximum Von Mises stress, respectively.

This paper used analytical method and model that is helpful for design of the water seal’s structure in complex working characteristics and the low viscosity of the water medium.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-11-2023-0366/

The purpose of the study was to benchmark meta-analytical conceptualizations of business-to-business (B2B) seller skills against empirical evidence in services firms.

The study is based on a deductive approach and questionnaire survey focusing on a range of services firms from different industries and corporate sizes. A total of 389 questionnaires out of 732 were returned, generating a response rate of 53.1%.

The study aims to provide empirical evidence and structures relating to B2B sellers' capabilities in a seven-dimensional conceptualization, all of which can be used in services firms to improve their seller efficiency. Each seller skill dimension performs a different function in the sales services process.

The authors conclude that the verified meta-analytical conceptualizations of B2B seller skills seem valid and reliable in services firms. Nevertheless, further research needs to be carried out, based on other company characteristics as well as industries.

It reduces the risk perceived by customers in B2B services settings through cultivating the sellers' capabilities, based on the seven-dimensional evidence of seller skills to enhance sales performance.

The study contributes to existing theory and previous studies by offering a foundation on which to structure sales performance indicators in services firms. Specifically, it contributes to structuring B2B seller skills across a selection of principal dimensions in B2B services settings.

Digital credit is spreading rapidly across Sub-Saharan Africa and holds potential for financial inclusion and female financial autonomy. Women in developing economies have long been targeted by microfinance institutions due to the women’s reliability and positive spillover effects. Yet, adoption rates for digital financial innovations remain moderate among rural women in Sub-Saharan Africa. The authors explore whether female preferences for digital and conventional credit differ from males.

The authors conduct a Discrete Choice Experiment with 420 smallholder farmers in central Madagascar, one of the region's poorest countries, to assess preferences for selected digital and conventional credit attributes.

Results of the mixed logit model and the comparison of the willingness-to-pay via Poe-test suggest high general demand for both credit forms. The demand of female respondents is higher than that of males, suggesting that they might be underserved. This holds for both credit forms. However, differences in willingness to pay for the credit attributes are mostly not statistically significant, indicating that designing gender-specific services may not be advisable.

This article is believed to be the first to assess and compare gendered willingness to pay for digital and conventional credit. The study’s findings give valuable insights to decision-makers in development politics as well as the fintech industry.

The purpose of this study is to examine the behaviour of retail investors while making an investment decision and how it gets affected by the behavioural biases of the investors using a moderated-mediation framework.

A mixed method approach has been used to fulfil the objectives of the study. In the first study, a qualitative analysis of the interviews with 15 retail investors was conducted. As part of the quantitative study, a total of 201 responses from Indian retail investors were collected using systematic sampling and analysed using structural equation modelling and Process Macro.

The results indicate that anchoring bias, availability bias, herding bias, switching cost, sunk cost, regret avoidance and perceived threat have a significant effect on retail investors’ investing intention. The attitude of the investors towards investing decisions mediates the effects of behavioural bias and the status quo on investment intention. The results of the moderated-mediation analysis indicate that mediating effect of attitude varied at the low and high-risk aversion of investors.

The findings of this study will help regulators and retail investors to understand the critical behavioural biases which affect the investors’ investing intention.

The paper contributes to the literature on investors’ behaviour, status quo bias theory (SQB) and behavioural bias. This study uniquely proposes a moderated-mediation framework to understand the effects of biases on retail investors’ investment intention.

Stakeholder theory understands business in terms of relationships among stakeholders whose interests are mainly joint but may be occasionally conflicting. In the latter case, managers may need to make trade-offs between these interests. The purpose of this paper is to explore the nature of managerial decision-making about these trade-offs.

This paper draws on the ordonomic approach which sees business life to be rife with social dilemmas and locates the role of stakeholders in harnessing or resolving these dilemmas through engagement in rule-finding and rule-setting processes.

The ordonomic approach suggests that stakeholder interests trade-offs ought to be neither ignored nor avoided, but rather embraced and welcomed as an opportunity for bringing to fruition the joint interest of stakeholders in playing a better game of business. Stakeholders are shown to bear responsibility for overcoming the perceived trade-offs through the institutional management of social dilemmas.

For many stakeholder theorists, the nature of managerial decision-making about trade-offs between conflicting stakeholder interests and the nature of trade-offs themselves have been a long-standing point of contention. The paper shows that trade-offs may be useful for the value creation process and explicitly discusses managerial strategies for dealing with them.

An excessive increase in temperature will reduce the lifespan and even burn the coil. The variety of materials in the structure of the electromagnet along with its multi-layer winding creates a complex and heterogeneous thermal structure. There are very few researches that are completely focused on the thermal analysis of electromagnets. The purpose of this paper is to provide an accurate, yet fast and simple method for the thermal analysis of cylindrical electromagnets in both transient and steady-state modes. For this purpose, a thermal equivalent circuit (TEC) is presented based on the nodding approach.

The results of TEC analysis of cylindrical electromagnet, for two orthogonal and orthocyclic winding coil technologies, were compared with the results of the thermal simulation in COMSOL. The authors also built a laboratory model of the cylindrical electromagnet, similar to those analyzed and simulated, and measured the temperature in different parts of it.

The comparison of the results obtained from different methods for the thermal analysis of the cylindrical electromagnet indicates that the proposed TEC has an error of less than 2%. The simplicity and high accuracy of the results are the most important advantages of the proposed TEC.

Comparing the information and results related to winding schemes, indicates that the orthogonal winding has less cost and weight due to the shorter length of the wire used. On the other hand, orthocyclic winding generates lower temperature and has more lifting force, and is simpler to implement. Therefore, in practice, orthocyclic winding technology is usually used.

The purpose of this paper is to present an up-to-date survey on the non-orthogonal multiple access (NOMA) technique with co-operative strategy, a fast-evolving fifth-generation (5 G) technology. NOMA is used for serving many mobile users, both in power and code domains. This paper considers the power-domain NOMA, which is now discussed as NOMA.

The first part of the paper discusses NOMA-based cooperative relay systems using different relay strategies over different channel models. In various research works, the analytical expressions of many performance metrics were derived, measured and simulated for better performance of the NOMA systems. In the second part, a brief introduction to diversity techniques is discussed. The multiple input and multiple output system merged with cooperative NOMA technology, and its future challenges were also presented in this part. In the third part, the paper surveys some new conceptions such as cognitive radio, index modulation multiple access, space-shift keying and reconfigurable intelligent surface that can be combined with NOMA systems for better performance.

The paper presents a brief survey of diverse research projects being carried out in the field of NOMA. The paper also surveyed two different relaying strategies that were implemented in cooperative NOMA over different channels and compared several performance parameters that were evaluated and derived in these implementations.

The paper provides a scope for recognizable future work and presents a brief idea of the new techniques that can be united with NOMA for better performance in wireless systems.

The calculation of electromagnetic fields can involve many degrees of freedom (DOFs) to achieve accurate results. The DOFs are directly related to the computational effort of the simulation. The effort is decreased by using the proper generalized decomposition (PGD) and proper orthogonalized decomposition (POD). The purpose of this study is to combine the advantages of both methods. Therefore, a hybrid enrichment strategy is proposed and applied to different electromagnetic formulations.

The POD is an a-priori method, which exploits the solution space by decomposing reference solutions of the field problem. The disadvantage of this method is given by the unknown number of solutions necessary to reconstruct an accurate field representation. The PGD is an a-priori approach, which does not rely on reference solutions, but require much more computational effort than the POD. A hybrid enrichment strategy is proposed, based on building a small POD model and using it as a starting point of the PGD enrichment process.

The hybrid enrichment process is able to accurately approximate the reference system with a smaller computational effort compared to POD and PGD models. The hybrid enrichment process can be combined with the magneto-dynamic T-Ω formulation and the magnetic vector potential formulation to solve eddy current or non-linear problems.

The PGD enrichment process is improved by exploiting a POD. A linear eddy current problem and a non-linear electrical machine simulation are analyzed in terms of accuracy and computational effort. Further the PGD-AV formulation is derived and compared to the PGD-T-Ω reduced order model.

This study aims to investigate the optimal process parameters of the wire-cut electrical discharge machining (WCEDM) for the machining of the GZR-AA7475 hybrid metal matrix composite (HMMC). HMMCs are prepared with 2 Wt.% graphite and 4 Wt.% zirconium dioxide reinforced with aluminium alloy 7475 (GZR-AA7475) composite by using the stir casting method. The objective is to enhance the mechanical properties of the material while preserving its unique features. WCEDM with a 0.18 mm molybdenum wire electrode is used for machining the composite.

To conduct experimental studies, a Taguchi L27 orthogonal array was adopted. Input variables such as peak current (I_p), pulse-on-time (T_ON) and flushing pressure (P_F) were used. The effect of process parameters on the output responses, such as material removal rate (MRR), surface roughness rate (SRR) and wire wear ratio (WWR), were investigated. The grey relational analysis (GRA) is used to obtain the optimal combination of the process parameters. Analysis of variance (ANOVA) was also used to identify the significant process parameters affecting the output responses.

Results from the current study concluded that the optimal condition for grey relational grade is obtained at T_ON = 105 µs, I_p = 100 A and P_F = 90 kg/cm². Peak current is the most prominent parameter influencing the MRR, whereas SRR and WRR are highly influenced by flushing pressure.

Identifying the optimal process parameters in WCEDM for machining of GZR-AA7475 HMMC. ANOVA and GRA are used to obtain the optimal combination of the process parameters.

The aim of this article is to obtain a stable tensegrity structure by using the minimum knowledge of the structure.

Three methods have been formulated based on the eigen value decomposition (EVD) and singular value decomposition theorems. These two theorems are being implemented on the matrices, which are computed from the minimal data of the structure. The required minimum data for the structure is the dimension of the structure, the connectivity matrix of the structure and the initial force density matrix computed from the type of elements. The stability of the structure is analyzed based on the rank deficiency of the force density matrix and equilibrium matrix.

The main purpose of this article is to use the defined methods to find (1) the nodal coordinates of the structure, (2) the final force density values of the structure, (3) single self-stress from multiple self-stresses and (4) the stable structure.

By using the defined approaches, one can understand the difference of each method, which includes, (1) the selection of eigenvalues, (2) the selection of nodal coordinates from the first decomposition theorem, (3) the selection of mechanism mode and force density values further and (4) the solution of single feasible self-stress from multiple self-stresses.