Search results

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

Recently the route connecting the trans-Korean railway and the trans-Siberian railway has become of particular interest for many academics and policy-makers in East Asian countries. The extensive review of previous studies, however, reveals that literature on the subject is lacking solid analytical framework. Most studies are one-sided, focusing on the political aspects of the issue or paying little attention to the economic aspects of the problem.

This study intends to develop an analytical framework through which the most efficient route among four major alternative routes connecting the trans-Korean and trans-Siberian railways can be identified. It attempts to assign priorities to the four alternative routes according to their level of economic efficiency.

This study utilizes a simple cost-benefit analysis in evaluating the four routes. Cost side, transportation time, effectiveness of customs procedures, and gauge difference are selected as the main economic factors. The volume of cargo, industrial production in adjacent regions, access to natural resources, and market size and foreign investment climate are used to evaluate the benefits of the routes.

The study concludes that Route 3, which connects ‘Busan - Seoul (South Korea) –Pyongyang -Sinuiju (North Korea) –Shenyang –Beijing - Erenhot (China) –Ulaanbaatar (Mongolia) –Ulan-Ude - Moscow (Russia)’ is the most efficient route.

Since 1988 Russia and Korea have been developing bilateral economic relations. After the conclusion of, the first trade agreement, Korea has become one of the largest trading and investment partners of the Russian Far East. Annually, Korea has increased trade and investment flows to the Russian Far East, a region with high growth potential. By the 2000s Korea has become the Russian Far East’s third largest trading partner. This article considers trade and investment flows from the 1990s to the present, analyses the prospects of achieving goals, and the problems of developing further bilateral cooperation between Russia and Korea.

The national logistics policy report published by Ministry of Land, Infrastructure and Tourism in 2011 proposes to establish international logistics strategy teams in 10 different regions around Japan to satisfy the increasing demand for advance transportation infrastructure and stay competitive in Asia Pacific. The globalization of world economies creates many opportunities as well as challenges for international logistics companies to gain more business chances in this changing environment. The purpose of this paper is to improve service quality of international logistics companies and explores the quality function deployment in terms of quality evaluation method. The logistics service is particularly characterized by offering a series of transport solution and including other logistics activities. The major customers of the logistics services are the industrial clients. The customer satisfaction is key managerial mission since the competitiveness is a growing issue in this industry. The quality function deployment is one of the unique procedures to expose the requirements of customer and transform them into managerial tasks by cross correlation analysis between requirements and technical measures. The empirical study is performed to investigate service quality of the logistics industry by focusing on a group of leading logistics companies.

As the global economy continues to boom, there remains a significant need for more efficient transportation and effective management in corporate logistics. In this regard, railways have been considered one of the most efficient modes for long distance transportation. In Asia, there are several extensive and direct railroads such as the TSR (Trans-Siberian-Railroad), the TCR (Trans-Chinese-Railroad) and the TMR (Trans-Mongolian-Railroad) which could connect Asia to Europe. If these railroad networks such as the TKR (Trans-Korean-Railroad) were fully operational, it is expected that they would replace a major portion of the current global trade transportation with is sent through other shipping methods. Therefore, the development of railroad networks is one of the most important steps toward an integrated international transportation system. However, in reality, it is difficult to achieve this vision because of the political and economic problems surrounding multiple countries that this network must cut across. Moreover, it is difficult to ensure the railways’ economic competitiveness when it is compared with other logistics options. In this study, we aim to discover the status quo about railway networks by focusing on the TCR and TSR. Through in-depth interviews and surveys with actual users of these networks, current issues and problems are analysed in order to make suggestions for improvements. This research also provides meaningful insights which the TKR-TSR and TKR-TCR railway networks should consider if they want to continue to be successful in the future.

Background: Amid increasing leadership failures in the global business context, the mining industry is one of the industries with many adverse incidents, affecting employee safety, the environment, and surrounding communities. Emerging economies tend to have unique socio-economic challenges and greater relative economic dependence on mining, presenting unique challenges to leaders. The purpose of this research was to study the realities of responsible leadership in the mining industry in an emerging economy.

Methods: A qualitative research study, consisting of semi-structured interviews was conducted. Nine senior mine managers were selected to represent perspectives from different operations and mining houses. Data was gathered from August to October 2020 in South Africa, an emerging economy with significant mining operations. A thematic analysis of interview transcripts was conducted through the use of software, rendering five themes, with 12 sub-themes.

Results: The research found that requirements on mining leaders in emerging economies demand consistent balancing of a complex set of competing risks, whilst attending to paradoxical requirements among operations, and internal and external stakeholders. Leaders face several competing requirements from stakeholders, the environment, mining practices, and time frames. Responsible leaders must navigate a paradoxical maze of needs and time horizons, with several conflicting forces and dilemmas, and dichotomous relationships. Responsible leadership in the mining industry of an emerging economy is a proverbial minefield of paradoxes and dilemmas between responsible intentions and practical realities. These paradoxes and dilemmas are specifically acute in the context of emerging economies due to the dire socio-economic situations. A total of 10 competencies emerged as essential responsible leadership requirements in this context.

Conclusions: The study provides an in-depth understanding of the intricacies of responsible leadership in the mining industry of an emerging economy. This understanding will contribute to capacitating leaders in the mining industries of emerging economies to act responsibly.

Background: The annual average daily traffic (AADT) data from road segments are critical for roadway projects, especially with the decision-making processes about operations, travel demand, safety-performance evaluation, and maintenance. Regular updates help to determine traffic patterns for decision-making. Unfortunately, the luxury of having permanent recorders on all road segments, especially low-volume roads, is virtually impossible. Consequently, insufficient AADT information is acquired for planning and new developments. A growing number of statistical, mathematical, and machine-learning algorithms have helped estimate AADT data values accurately, to some extent, at both sampled and unsampled locations on low-volume roadways. In some cases, roads with no representative AADT data are resolved with information from roadways with similar traffic patterns.

Methods: This study adopted an integrative approach with a combined systematic literature review (SLR) and meta-analysis (MA) to identify and to evaluate the performance, the sources of error, and possible advantages and disadvantages of the techniques utilized most for estimating AADT data. As a result, an SLR of various peer-reviewed articles and reports was completed to answer four research questions.

Results: The study showed that the most frequent techniques utilized to estimate AADT data on low-volume roadways were regression, artificial neural-network techniques, travel-demand models, the traditional factor approach, and spatial interpolation techniques. These AADT data-estimating methods' performance was subjected to meta-analysis. Three studies were completed: R squared, root means square error, and mean absolute percentage error. The meta-analysis results indicated a mixed summary effect: 1. all studies were equal; 2. all studies were not comparable. However, the integrated qualitative and quantitative approach indicated that spatial-interpolation (Kriging) methods outperformed the others.

Conclusions: Spatial-interpolation methods may be selected over others to generate accurate AADT data by practitioners at all levels for decision making. Besides, the resulting cross-validation statistics give statistics like the other methods' performance measures.

Employing institutional logic and institutional work as its theoretical framework, this study analyzes scholars' reactions to performance measurement systems in academia.

Large datasets were collected over time, combining both quantitative and qualitative elements. The data were gathered from a two-wave survey in 2010 (966 respondents) and 2015 (672 respondents), conducted among scholars performing teaching- and research-oriented tasks in three Finnish universities.

The analysis showed statistically significant changes over time in the ways that the respondents were positioned in three major groups influenced by different institutional logics. This study contributes to the international debate on institutional change in universities by showing that in Finnish universities, emerging business logics and existing professional logics can co-exist and be blended among a growing group of academics. The analysis of qualitative open-ended answers suggests that performance measurement systems have led to changes in institutional logic, which have influenced the scholars participating in institutional work at the microlevel in academia.

While most scholars remain critical of performance measurement systems in universities, the fact that many academics are adapting to performance measurement systems highlights significant changes that are generally occurring in academia.

While most extant studies have focused on field- and organizational-level analyses, this study focuses on understanding how the adoption of performance measurement systems affects institutional logic and institutional work at the microlevel. Moreover, the study's cross-sectional research setting increases society's understanding of institutional evolution in academia.

The objectives of this paper are to estimate the annual Malmquist TFP(total factor productivity) index of Korea and China’s road freight transport with DEA(data envelope analysis) and to decompose the index into technical efficiency change and technology change. In the process of the estimation, we used labor, capital, and fuel as input factors and ton-km of road freight transport as output factor. The panel data of Korea and China’s road freight transport industry from 1985 to 2004 are used. The results of the analysis show several points. First, there was no significant improvement in China’s TFP growth before 1997, but there was continuous growth in TFP since 1997 because of constantly increasing domestic freight transport demand. Second, there was downward trend in Korea’s TFP, especially there was a large reduction of productivity in 1998 because of the huge reduction of road freight transport demand during the period of the economic crisis. Third, the technology improvements play a significant role in the TFP growth and the technical efficiency had negative effects on the TFP growth of Korea. However, the technology improvements as well as the technical efficiency had positive effects on the TFP growth of China’s road freight transport industry.

The purpose is to market a reinterpretation of Brazilian economic history highlighting the importance of non-tradable goods to understand major historical developments such as the lack of industrialization in the mining boom; the rise and contribution of industries to development in the early 20th century; indexation as hyperinflation in the late 20th century; growth and cycles in the early 21st century.

Section 2 introduces analytical perspectives on the relationship between non-tradables, transport costs and external shocks. Section 3 presents a historical overview of the gold and coffee cycles in the Brazilian economy, which highlights the crucial role played by transport costs in the genesis of industrialization. Thus, in a more precise way, industrialization was not an import substitution process but the substitution of non-tradables by the domestic tradable manufactures.

Section 4 shows that Brazilian statistical records and historiography disregard this characterization and, to that extent, underestimate economic growth in the primary export phase (1872–1920) and overestimate growth rates in the industrialization period (1920–1940). Section 5 shifts to the end of the 20th century to analyze the relationship between non-tradables, indexation and hyperinflation. Section 6 concludes with a brief discussion of the role played by the terms of trade and non-tradables in the unfolding of the 2014 economic crisis.

Distance from international markets and a continental geographic size made transport costs in Brazil historically prohibitive: the relevance of non-tradables in the Brazilian economic history. While the theme is not new, it seldom received proper attention in the historiography.