Search results

The amount of food wasted every year is 1.3 billion metric tonne (MT), out of which 0.5 billion MT is contributed by the fruits processing industries. The waste includes by-products such as peels, pomace and seeds and is a good source of bioactive compounds like phenolic compounds, flavonoids, pectin lipids and dietary fibres. Hence, the purpose of the present study is to review the novel extraction techniques used for the extraction of the bio active compounds from food waste for the selection of suitable extraction method.

Novel extraction techniques such as ultrasound-assisted extraction, microwave-assisted extraction, enzyme-assisted extraction, supercritical fluid extraction, pulsed electric field extraction and pressurized liquid extraction have emerged to overcome the drawbacks and constraints of conventional extraction techniques. Hence, this study is focussed on novel extraction techniques, their limitations and optimization for the extraction of bioactive compounds from fruit and vegetable waste.

This study presents a comprehensive review on the novel extraction processes that have been adopted for the extraction of bioactive compounds from food waste. This paper also summarizes bioactive compounds' optimum extraction condition from various food waste using novel extraction techniques.

Food waste is rich in bioactive compounds, and its efficient extraction may add value to the food processing industries. Hence, compressive analysis is needed to overcome the problem associated with the extraction and selection of suitable extraction techniques.

Selection of a suitable extraction method will not only add value to food waste but also reduce waste dumping and the cost of bioactive compounds.

This paper presents the research progress on the extraction of bioactive active compounds from food waste using novel extraction techniques.

The purpose of this paper is to investigate the polyamide 12 (PA12) powder properties deterioration in the laser sintering (LS) process and propose a methodology for more efficient powder recycling. The main goals are: to recommend a level of input PA2200 powder properties which could guarantee acceptable part quality in the LS process; and selection of the refresh rate in order to minimise the consumption of fresh material.

The paper analyses the LS processing conditions and current recycling practices in relation to the deterioration or ageing of the PA12‐based powders. Samples of new and recycled grades of PA2200 powder were artificially aged in a temperature‐controlled oven and then tested using melt flow rate (MFR) indexer. Also, un‐sintered powder samples collected from different locations within various builds, and different LS machines (EOSINT P700 and Sinterstation^® 2500 HiQ) were tested.

The powder exposed at higher temperature and longer time experiences a much higher deterioration rate. The temperature and the time at which the un‐sintered material was exposed are the most influential parameters for the powder aging. It was confirmed that the MFR index is a very sensitive indicator of the changes in the powder properties and provides a relatively fast and inexpensive method of measuring the rate of the powder degradation because of the LS process. The powder located in the periphery and the top of a build has a higher MFR and therefore is less deteriorated. In contrast, powder located in the centre, or in the bottom of a long build has much lower MFR and therefore is less usable.

Based on the findings, a methodology for powder recycling is proposed. It allows a better control of the input material properties, a consistent quality of the fabricated parts, and more efficient use of the LS material.

The paper provides some useful information for the properties deterioration of PA12‐based powders (PA2200) in relation to the temperature and time at which the material is exposed in the LS.

The following definitions and standards for food products have been adopted as a guide for the officials of this Department in enforcing the Food and Drugs Act. These are standards of identity and are not to be confused with standards of quality or grade; they are so framed as to exclude substances not mentioned in the definition and in each instance imply that the product is clean and sound. These definitions and standards include those published in S. R. A., F. D. 2, revision 4, and those adopted October 28, 1936.

Our attention has been called to a question raised in a contemporary as to the disposal of the flesh of bovines which have been compulsorily slaughtered as the result of having obviously contracted tuberculosis. We say “compulsory” as the slaughter is carried out by order of the Ministry of Agriculture and “obvious” as tuberculous infection is in many cases not readily detectable. It should be pointed out that the flesh of an infected bovine may be used for food according to the degree and nature of the infection, but the use of the flesh for such a purpose is only permissible at the discretion of the official veterinary expert acting on behalf of the Ministry in the interests of public health. Admittedly the regulations as at present laid down and under which the Ministry of Agriculture act are by no means ideal, and we have no doubt that the officials of the Ministry would be the last persons to say that they were. Like all such regulations, they are of the nature of a compromise, by which statement we do not mean that the monetary interests of the trades in milk and beef are placed before those of public health. Far from it. The ideal condition aimed at is of course to have all milk and all beef free from the slightest taint and risk of tubercular infection. It is, however, no use to disguise the fact that the attainment of such an ideal is and of necessity must be a long way from accomplishment. It is only within this century that bovine tuberculosis has received serious attention in this country, and bovine tuberculosis is an evil legacy from a long past. It is no doubt in part at least attributable to long continued bad housing and feeding that went on unchecked from year to year. It is well known that in the neighbourhood of large towns where open pasture was not readily attainable cows were sometimes kept in what were little better than cellars, from which they seldom emerged. A cow was looked upon as a sort of machine for yielding milk, and no regard was paid to the way in which the machine was run so long as it delivered the goods, no matter of what quality the goods might be. The conditions for the development of tuberculosis were thus almost as good as if they had been deliberately devised for that very purpose, with results that we have now every reason to deplore. It is only twenty years since Prof. MacFadyean stated that 20 per cent. of the adult cattle in the country were tuberculous, and on the authority of the veterinary surgeon to the King at the same time 36 out of a herd of 40 cows that had belonged to Queen Victoria were tuberculous. If these were the conditions but twenty years ago throughout the country, and if nine out of every ten animals which were kept under the best conditions and received every care were tuberculous, the difficulty and extraordinary complexity of the problem confronting the Ministries concerned at the present day in their attempts to check the evil may be perhaps imagined. Checked it may be but eradication is not in sight. For if the drastic expedient were resorted to of slaughtering every tuberculous bovine in the country the result would be a milk famine. Prices would rise so that for the poor milk would be unobtainable. Many in the trade would be ruined, and perhaps the supply of milk would have to be obtained by importations of milk from abroad produced under conditions over which we could exercise no control. This hypothetical aspect of affairs, however, need not be further discussed.—The administration of the Tuberculosis Order, 1925 (Diseases of Animals Acts, 1894 to 1925), by the Ministry of Agriculture is therefore one of great difficulty. The “waste of years” cannot be “refunded in a day.” The matter calls for constant expert veterinary supervision.—Under Section 3 (1) of the Order the disease is notifiable to the Local Authority. Veterinary inspection follows, and if the animal is found to be suffering from tuberculosis of the udder, tuberculous emaciation, or a chronic cough or yielding tuberculous milk the Local Authority shall order the animal to be slaughtered, though if the owner objects to this the special authority of the Minister has to be obtained. It does not follow that the flesh of a tuberculous animal is unfit to be used as human food. Under 5A.1 of the Order if it is intended to use the flesh for this purpose the Local Authority must notify the Sanitary Authority of the time and place of slaughter. After this neither the carcase nor any part of it may be removed from the slaughter house unless by leave of the Medical Officer of Health or by other competent officer of the Authority.—Removal before such leave is an offence under the Act.—It may be observed here that no animal whose value is stated to be over fifty pounds may be slaughtered under the Order except by Ministerial sanction.—Compensation is payable to the owner of an animal, which has been slaughtered under the Order, by the Local Authority. All this is clear and fair, but as illustrating one of the difficulties of administering the Order, it may be pointed out that these perfectly fair and reasonable regulations made in the interests of public health were found to be indirectly in conflict with public ignorance and prejudice. In this way. In certain industrial districts in the country lean meat was demanded by some of the working class families. The reason being that more nourishment could be got out of lean than out of fat. There is something to be said for this. But where did the lean meat come from? An emaciated beast without a bit of fat on it might well be suffering from tuberculosis. It would pay an unscrupulous owner of such a beast very much better to sell it direct to a dealer in such meat—no information being given and no questions being asked—rather than go to the trouble of observing the Act and receiving a possibly smaller amount of money which would have been paid him under the Order. Thus quite a flourishing trade in such diseased meat was in fair way to grow up, and until the evil was traced to its source and the original owner prosecuted for non‐notification it could not be stopped. Again, the owner of an animal that has been slaughtered under the Order is entitled to recover its full market value and twenty shillings over if it is found that no tubercle exists; if tuberculosis, but not of an advanced state is found, then three‐fourths of the market value or forty‐five shillings, whichever sum is the greater less one‐half the costs of valuation; if advanced tuberculosis is present then one‐fourth the market value or the sum of forty‐five shillings as before under Section 9 i., ii., and iii. of the Order. The result of this was that certain people established a somewhat paying business in buying obviously tuberculous cows from a cowkeeper for a mere song, the cowkeeper being quite willing to get rid of them in this way and thus save himself trouble and the small amount of publicity he would have incurred had he observed the terms of the Order. The buyer would then notify the authority that he had a tuberculous cow and obtain compensation which yielded him a profit. The report for 1928 shows that nearly 17,000 animals were slaughtered under the Order during the year, and nearly 200 were in such a condition that they died before they could be slaughtered! It may also be observed that the powers conferred by Act of Parliament on the responsible Ministries were not readily obtained. Trade interests were alleged, and effective legislation had to be built up in the face of this. Tuberculosis is unhappily somewhat firmly established in our herds of cattle and it will still require long and patient work, expert knowledge and, as it will have been seen, the methods of police detectives before the menace is removed, if it ever can be.

This paper aims to describe a new process for suppressing the formation of orange peel, which is a polymer laser sintering (LS) process error.

The target for controlling the suppression of orange peel is securing the contact between the molten polymer and the surrounding powder. The authors set the powder bed temperature closer to the melting temperature than that for a typical LS. Alternatively, the authors use a low-power laser to irradiate the powder bed surrounding the parts being built. The surface finish of the built parts was evaluated using a three-dimensional scanner.

Both approaches were effective in suppressing orange peel. From the viewpoint of reusability of the used powder, the process that includes low-power laser irradiation is practical. The presence or absence of contact between the surrounding powder and the molten polymer determines whether the orange peel is formed.

The authors have not tested orange peel suppression for complex shapes.

The authors have demonstrated a concrete process that can suppress orange peel formation even for powders with low melt-flow rates. Furthermore, a mechanism for the formation/suppression of orange peel based on the experimental results was proposed.

The aim of this study is to examine the effect of carbonization on the surface and its influence on heavy metal removal by water hyacinth based carbon.

Dried water hyacinth stem was used as precursor to prepare carbon based adsorbent by pyrolysis method. The adsorbent proximate (ash, volatile matter and fixed carbon) and elemental (carbon hydrogen nitrogen sulfur) composition, surface area, pore size distribution, surface chemistry was examined and compared.

The results demonstrated that through carbonization in comparison to dried water hyacinth stem, it increased the surface area (from 58.46 to 328.9 m²/g), pore volume (from 0.01 to 0.07 cc/g), pore size (from 1.44 to 7.557 Å) thus enhancing heavy metal adsorption. The metal adsorption capacity of Cd, Pb and Zn was measured and analyzed through induced coupled plasma-mass spectrometer. At metal concentration of 0.1 mg/l adsorption rate for Cd, Pb and Zn was 99% due to increased large surface area, coupled with large pore size and volume. Furthermore, the adsorbent surface hydroxyl group (OH⁻) enhanced adsorption of positively charged metal ions through electrostatic forces.

It is presumed that not only adsorption with synthetic wastewater but real wastewater samples should be examined to ascertain the viability of adsorbent for commercial application.

There are little or scanty data on the effects of carbonization on water hyacinth stem based carbon and subsequent effects on heavy metal removal in effluents.

Orange peel formation remains to be understood clearly because it is difficult to directly observe a laser-sintered process in a partcake. Therefore, this study aims to provide insight into the orange peel formation mechanism through the nondestructive observation of laser-sintered specimens and their surrounding powders.

This study observed polyamide 12 powder in the vicinity of a laser-sintered specimen via X-ray computed tomography (CT) scanning. The specimen for nondestructive observation was 3D modeled in a hollow box using 3D CAD software. The boxes built using a laser-sintering system contained unsintered surrounding powder and sintered specimens. The box contents were preserved even after the boxes were removed from the partcake. After X-ray CT scanning, the authors broke the boxes and evaluated the unevenness formed on the specimen surface (i.e. the orange peel evaluation).

Voids (not those in sintered parts) generated in the powder in the vicinity of the specimen triggered the orange peel formation. Voids were less likely to form in the build with a 178.5° powder bed than in the build with a 173.5° powder bed. Similarly, the increment in laser energy density effectively suppressed void formation, although there was a tradeoff with overmelting. Thin-walled parts avoided void growth and made the orange peel less noticeable.

To the best of the authors’ knowledge, this study is the first to observe and understand the relationship between voids generated in the powder in the vicinity of sintered parts and orange peel formation.

This paper aims to study the effect of orange peel and moringa leaves extracts on microbiological safety, sensory quality, lipid oxidation and color properties of chicken sausages under frozen storage.

Chicken sausages were prepared by using orange peel, moringa leaves extracts and butylated hydroxytoluene (BHT). The sausages were stored in a freezer at −18°C. Samples were taken at a regular interval of 20 days from the day of production to spoilage of sausages and analyzed for microbiological safety, sensory quality, lipid oxidation and color properties.

In comparison to the control sausage, sausages having BHT, orange peel and moringa leaves extract had a significantly (p < 0.05) lower bacterial, yeast and mold count. All the sausages were microbiologically safe for consumption till the 100th day, and the results of the 120th day crossed the permissible limits. Sensory acceptability scores of sausages were good (>6) throughout the storage period. The color values of sausages were not affected by the addition of orange peel and moringa leaves extract. The extent of lipid oxidation increased during storage, and sausages with BHT, orange peel and moringa leaves extract had significantly (p < 0.05) lower values of thiobarbituric acid reactive substances and free fatty acids (FFAs) toward the end of the storage period.

The observations of this paper endorse the use of orange peel and moringa leaves extract in meat products formulation for acceptable storage stability under frozen conditions.

This study aims to demonstrate that orange-derived and lemon-derived systems can be used in continuous processes as efficient adsorbents to the entrapment of some anionic and cationic dyes in the textile dyeing wastewater effluents.

Physically and chemically modified orange and lemon mesocarps are used as natural adsorbents for the cationic dyes Basic Blue 3, Basic Yellow 21, Basic Red 18 and Basic Green 4 and the anionic dyes Acid Blue 264, Acid Yellow 49 and Acid Red 337, all commonly used in the textile dyeing industry. Adsorption capacities of the orange-derived and lemon-derived adsorbents on the dyes are studied simulating a batch and continuous industrial processes.

Results demonstrate that treated orange mesocarp (orange-derived adsorbent) can adsorb up to 97% of cationic Basic Green 4 in 30 min, whereas the lemon mesocarp (lemon-derived adsorbent) can retain up to 88% within the same time. In the case of anionic, 91% Acid Blue 264 is adsorbed by the orange mesocarp in 15 min, whereas 92% is adsorbed by the lemon homologue within the same time.

As far as the authors know, physically and chemically modified orange and lemon mesocarps have not been used on the removal of cationic (Basic Blue 3, Basic Yellow 21, Basic Red 18 and Basic Green 4) and anioinic (Acid Blue 264, Acid Yellow 49 and Acid Red 337) dyes of textile dyeing wastewater industry. It is a costless and efficient treatment that supposes, on the one hand, an eco-friendly and feasible process for discolouration of wastewater and, on the other, a valorisation (upcycling) of orange and lemon peels, which are not currently used.

The increasing accumulation of synthetic plastic waste in oceans and landfills, along with the depletion of non-renewable fossil-based resources, has sparked environmental concerns and prompted the search for environmentally friendly alternatives. Biodegradable plastics derived from lignocellulosic materials are emerging as substitutes for synthetic plastics, offering significant potential to reduce landfill stress and minimise environmental impacts. This study highlights a sustainable and cost-effective solution by utilising agricultural residues and invasive plant materials as carbon substrates for the production of biopolymers, particularly polyhydroxybutyrate (PHB), through microbiological processes. Locally sourced residual materials were preferred to reduce transportation costs and ensure accessibility. The selection of suitable residue streams was based on various criteria, including strength properties, cellulose content, low ash and lignin content, affordability, non-toxicity, biocompatibility, shelf-life, mechanical and physical properties, short maturation period, antibacterial properties and compatibility with global food security. Life cycle assessments confirm that PHB dramatically lowers CO₂ emissions compared to traditional plastics, while the growing use of lignocellulosic biomass in biopolymeric applications offers renewable and readily available resources. Governments worldwide are increasingly inclined to develop comprehensive bioeconomy policies and specialised bioplastics initiatives, driven by customer acceptability and the rising demand for environmentally friendly solutions. The implications of climate change, price volatility in fossil materials, and the imperative to reduce dependence on fossil resources further contribute to the desirability of biopolymers. The study involves fermentation, turbidity measurements, extraction and purification of PHB, and the manufacturing and testing of composite biopolymers using various physical, mechanical and chemical tests.