Search results

The paper aims to find an accurate analytic solution (series solution) for the micropolar flow in a porous channel with mass injection for different values of Reynolds number.

In this paper, the homotopy analysis method (HAM) with different numbers of unknown convergence-control parameters has been used to derive accurate analytic solution for micropolar flow in a porous channel with mass injection. The possible optimal value of convergence-control parameter determined by minimizing the averaged residual error.

The results obtained from HAM solution with two parameters are compared with numerical results and that obtained from HAM solution with only one parameter. The results show that this method gives an analytical solution with high order of accuracy with a few iterations. As shown in this paper, by minimizing the averaged residual error, the authors can get the possible optimal value of the convergence-control parameters which may give the fastest convergent series.

The HAM with different numbers of unknown convergence-control parameters can be used to obtain analytic solutions for many problems in sciences and engineering.

This paper fulfils an identified need to evaluate the accurate analytic solution (series solution) of practical problem.

In an earlier paper (Turkyilmazoglu, 2011a), the author introduced a new optimal variational iteration method. The idea was to insert a parameter into the classical variational iteration formula in an aim to prevent divergence or to accelerate the slow convergence property of the classical approach. The purpose of this paper is to approve the superiority of the proposed method over the traditional one on several physical problems treated before by the classical variational iteration method.

A sufficient condition theorem with an upper bound for the error is also presented to further justify the convergence of the new variational iteration method.

The optimal variational iteration method is found to be useful for heat and fluid flow problems.

The optimal variational iteration method is shown to be convergent under sufficient conditions. A novel approach to obtain the optimal convergence parameter is introduced.

The present critical analysis has been performed to explore the steady stagnation point flow of Jeffery fluid toward a stretching surface, in the presence of convective boundary conditions. It is assumed that the fluid strikes the wall obliquely. The governing non-linear partial differential equations for the flow field are converted to ordinary differential equations by using suitable similarity transformations. Optimal homotopy analysis method (OHAM) is operated to deal the resulting ordinary differential equations. OHAM is found to be extremely effective analytical technique to obtain convergent series solutions of highly non-linear differential equations. Graphically, non-dimensional velocities and temperature profile are expressed. Numerical values of skin friction coefficients and heat flux are computed. The comparison of results from this paper with the previous existing literature authorizes the precise accuracy of the OHAM for the limited case. The paper aims to discuss these issues.

The governing non-linear partial differential equations for the flow field are converted to ordinary differential equations by using suitable similarity transformations. OHAM is operated to deal the resulting ordinary differential equations.

OHAM is found to be extremely effective analytical technique to obtain convergent series solutions of highly non-linear differential equations. Graphically, non-dimensional velocities and temperature profile are expressed. Numerical values of skin friction coefficients and heat flux are computed.

The comparison of results from this paper with the previous existing literature authorizes the precise accuracy of the OHAM for the limited case.

The purpose of this study is to analyze magnetohydrodynamic three-dimensional flow of Casson nanofluid over a stretching sheet in presence of thermophoresis and Brownian motion effects. In contrast, the convective surface boundary conditions with the effects of radiation are applied.

The governing partial differential equations are transformed into highly nonlinear coupled ordinary differential equations consisting of the momentum, energy and nanoparticle concentration via suitable similarity transformations, which are then solved the using optimal homotopy analysis method (OHAM) a Mathematica Package BVPh2.0.

The influence of emerging physical flow parameters on fluid velocity component, temperature distribution and nanoparticle concentration are discussed in detail. Also, an OHAM solution demonstrates very good correlation with those obtained in the previously published results. It is noticed that OHAM can overcome the earlier restriction, assumptions and limitation of traditional perturbation method. The main advantage of this method is that OHAM can be applied directly to nonlinear differential equations without using linearization and round-off errors, and therefore, it cannot be affected by error associated to discretization.

Here the approximate solutions are compared with the numerical results published in earlier work.

The purpose of this paper is to conduct a numerical study of the convection heat transfer in porous media by the homotopy analysis method (HAM). The geometry considered is that of a rectangular profile fin. The porous fin allows the flow to infiltrate through it and solid-fluid interaction takes place. This study is performed using Darcy's model to formulate heat transfer equation. To study the thermal performance, three types of cases are considered namely long fin, finite length fin with insulated tip and finite length fin with tip exposed. The theory section addresses the derived governing equation. The effects of the porosity parameter Sh, radiation parameter G and temperature ratio CT on the dimensionless temperature distribution and heat transfer rate are discussed. The results suggest that the radiation transfers more heat than a similar model without radiation. The auxiliary parameter in the HAM is derived by using the averaged residual error concept which significantly reduces the computational time. The use of optimal auxiliary parameter provides a superior control on the convergence and accuracy of the analytic solution.

This study is performed using Darcy's model to formulate heat transfer equation. To study the thermal performance, three types of cases are considered namely long fin, finite length fin with insulated tip and finite length fin with tip exposed. The effects of the porosity parameter Sh, radiation parameter G and temperature ratio CT on the dimensionless temperature distribution and heat transfer rate are discussed.

The HAM has been successfully applied for the thermal performance of a porous fin of rectangular profile. Solutions are derived for three cases of tip condition: an infinitely long fin with tip in thermal equilibrium with the ambient, a finite fin with an insulated tip and a finite fin with a convective tip. The performance of the fin depends on three dimensionless parameters; porosity parameter Sh, radiation-conduction parameter G and a dimensionless temperature relating the ambient and base temperatures. The results show that the base heat flow increases when the permeability of the medium is high and/or when the buoyancy effect induced in the fluid is strong. The base heat flow is enhanced as the surface radiation or the tip Biot number increases.

The analysis is made for the Darcy's model. Non-Darcy effects will be investigated in a future work.

The approach is useful in enhancing heat transfer rates.

The results of the study will be interested to the researchers of the field of heat exchanger designers.

The purpose of this paper is to introduce the concept of improved Fourier–Fick laws subjected to variable fluid characteristics. Flow analysis in the stagnation region of Oldroyd-B fluid is elaborated. Heat generation is present.

Optimal homotopy analysis method is used to obtain convergent solutions.

The outcomes reveal reduction in penetration depths of temperature and concentration due to involvement of thermal and solutal relaxation times of fluxes.

As per the authors’ knowledge, such analysis has not yet been reported.

This study aims to analyze the Prandtl fluid flow in the presence of better mass diffusion and heat conduction models. By taking into account a linearly bidirectional stretchable sheet, flow is produced. Heat generation effect, thermal radiation, variable thermal conductivity, variable diffusion coefficient and Cattaneo–Christov double diffusion models are used to evaluate thermal and concentration diffusions.

The governing partial differential equations (PDEs) have been made simpler using a boundary layer method. Strong nonlinear ordinary differential equations (ODEs) relate to appropriate non-dimensional similarity variables. The optimal homotopy analysis technique is used to develop solution.

Graphs analyze the impact of many relevant factors on temperature and concentration. The physical parameters, such as mass and heat transfer rates at the wall and surface drag coefficients, are also displayed and explained.

The reported work discusses the contribution of generalized flux models to note their impact on heat and mass transport.

The purpose of this paper is to highlight the studies of momentum and transmission of heat on mixed convection boundary layer Darcy‒Forchheimer flow of Casson liquid over a linear extending surface in a porous medium. The belongings of homogeneous‒heterogeneous retorts are also affianced. The mechanism of heat transmission is braced out in the form of Cattaneo‒Christov heat flux. Appropriate restorations are smeared to revolutionize coupled nonlinear partial differential equations conforming to momentum, energy and concentration of homogeneous‒heterogeneous reaction equations into coupled nonlinear ordinary differential equations (ODEs).

Numerical elucidations of the transmogrified ODEs are accomplished via a dexterous and trustworthy scheme, namely optimal homotopy analysis method. The convergence of planned scheme is exposed with the support of error table.

The exploration of mixed convection Darcy‒Forchheimer MHD boundary layer flow of incompressible Casson fluid by the linear stretched surface with Cattaneo‒Christov heat flux model and homogeneous‒heterogeneous reactions is checked in this research. Imitations of the core subsidized flow parameters on velocity, temperature and concentration of homogeneous‒heterogeneous reactions solutions are conscripted. From the recent deliberation, remarkable annotations are as follows: non-dimensional velocities in x_a− and x_b− directions shrink, whereas the non-dimensional temperature upsurges when the Casson fluid parameter ameliorates. Similar impact of Casson fluid parameter, magnetic parameter, mixed convection parameter, inertia parameter, and porosity parameter is observed for both the components of velocity field. An escalation in magnetic parameter shows the opposite attitude of temperature field as compared with velocity profile. Similar bearing of Casson fluid parameter is observed for both temperature and velocity fields. Enhancement in concentration rate is observed for growing values of (N_s) and (Sc), and it reduces for (k₁). Both temperature and concentration of homogeneous‒heterogeneous upturn by mounting the magnetic parameter. Demeanor of magnetic parameter, Casson fluid parameter, heat generation parameter is opposite to that of Prandtl number and thermal relaxation parameter on temperature profile.

In many industrial and engineering applications, the current exploration is utilized for the transport of heat and mass in any system.

As far as novelty of this work is concerned this is an innovative study and such analysis has not been considered so far.

The purpose of this paper is to construct mathematical model for squeezed flow of carbon-water nanofluid between parallel disks considering Darcy–Forchheimer porous medium. Thermal conductivity of carbon nanotubes is estimated through the well-known Xue model. Such research work is not carried out in the past even in the absence of Darcy–Forchheimer porous space. Forchheimer equation is preferred here to account for both low and high velocity inertial effects. Researchers also found that dispersion of carbon nanotubes in water elevates the thermal conductivity of resulting nanofluid by 100 per cent.

Homotopy analysis method (HAM) is used for the convergent series solutions of the governing system.

Nusselt number at the lower disk increases when squeezing parameter Sq enlarges. This illustrates that heat transfer rate at the lower wall can be enhanced by increasing the squeezing velocity of the lower disk. The results demonstrate a decreasing trend in temperature profile for increasing volume fraction of carbon nanotubes. Moreover, improvement in heat transfer rate because of existence of carbon nanotubes is also apparent. A significant enhancement in temperature profile is depicted when inertial permeability coefficient is enhanced. Skin friction coefficients at the lower and upper disks are higher for MWCNTs in comparison to the SWCNTs.

To the best of author’s knowledge, no such consideration has been given in the literature yet.

The purpose of this paper is to investigate the effect of inclined magnetic field, variable viscosity and Cattaneo–Christov heat and mass flux theories on the steady MHD free convective boundary layer flow of viscous, incompressible and electrically conducting water-driven silver and titanium-oxide nanofluids over a vertical stretching sheet.

The boundary layer equations of momentum, energy and nanoparticle concentration are partial differential equations in nature, which are reduced to nonlinear ordinary differential equations by means of similarity transformations. The resulting nonlinear equations are solved analytically by means of optimal homotopy analysis method.

Assessments with numerical results are performed and are found to be in an excellent agreement. Numerical results of the skin friction factor, the local Nusselt number and the local Sherwood number are obtained through tables. The effects of various physical parameters on the velocity, temperature and nanoparticles fraction are incorporated through graphs. The study analyzes the efficiency of heat transfer of nanofluids in cooling plants and rubber sheets.

No research works have been conducted to evaluate the effects of various physical phenomena on the copper and titanium nanofluids flow.