Search results

Large optical mirror processing systems (LOMPSs) consist of multiple subrobots, and correlated disturbance terms between these robots often lead to reduced processing accuracy. This abstract introduces a novel approach, the nonlinear subsystem adaptive dispersed fuzzy compensation control (ADFCC) method, aimed at enhancing the precision of LOMPSs.

The ADFCC model for LOMPS is developed through a nonlinear fuzzy adaptive algorithm. This model incorporates control parameters and disturbance terms (such as those arising from the external environment, friction and correlation) between subsystems to facilitate ADFCC. Error analysis is performed using the subsystem output parameters, and the resulting errors are used as feedback for compensation control.

Experimental analysis is conducted, specifically under the commonly used concentric circle processing trajectory in LOMPS. This analysis validates the effectiveness of the control model in enhancing processing accuracy.

The ADFCC strategy is demonstrated to significantly improve the accuracy of LOMPS output, offering a promising solution to the problem of correlated disturbances. This work holds the potential to benefit a wide range of practical applications.

Selective laser sintering (SLS) is an essential technology in the field of additive manufacturing. However, SLS technology is limited by the traditional point-laser sintering method and has reached the bottleneck of efficiency improvement. This study aims to develop an image-shaped laser sintering (ISLS) system based on a digital micromirror device (DMD) to address this problem. The ISLS system uses an image-shaped laser light source with a size of 16 mm × 25.6 mm instead of the traditional SLS point-laser light source.

The ISLS system achieves large-area image-shaped sintering of polymer powder materials by moving the laser light source continuously in the x-direction and updating the sintering pattern synchronously, as well as by overlapping the splicing of adjacent sintering areas in the y-direction. A low-cost composite powder suitable for the ISLS system was prepared using polyether sulfone (PES), pinewood and carbon black (CB) powders as raw materials. Large-sized samples were fabricated using composite powder, and the microstructure, dimensional accuracy, geometric deviation, density, mechanical properties and feasible feature sizes were evaluated.

The experimental results demonstrate that the ISLS system is feasible and can print large-sized parts with good dimensional accuracy, acceptable geometric deviations, specific small-scale features and certain density and mechanical properties.

This study has achieved the transition from traditional point sintering mode to image-shaped surface sintering mode. It has provided a new approach to enhance the system performance of traditional SLS.

This paper aims to propose a two-stage vibration isolation system for large airborne equipment to isolate aircraft vibration load.

First, the vibration isolation law of the discrete model of large airborne equipment under different damping ratios, stiffness ratios and mass ratios is analyzed, which guides the establishment of a three-dimensional solid model of large airborne equipment. Subsequently, the vibration isolation transfer efficiency is analyzed based on the three-dimensional model of the airborne equipment, and the angular and linear vibration responses of the two-stage vibration isolation system under different frequencies are studied.

Finally, studies have shown that the steady-state angular vibration at the non-resonant frequency changes little. In contrast, the maximum angular vibration at the resonance peak reaches 0.0033 rad, at least 20 times the response at the non-resonant frequency. The linear vibration at the resonant frequency is at least 2.14 times the response at the non-resonant frequency. Obviously, the amplification factor of linear vibration is less than that of angular vibration, and angular vibration has the most significant effect on the internal vibration of airborne equipment.

The two-stage vibration isolation equipment designed in this paper has a positive guiding significance for the vibration isolation design of large airborne equipment.

This article aims to predict the rapid track geometry change in the short term with a higher detection frequency, and realize the monitoring and maintenance of the railway state.

Firstly, the ABA data needs to be filtered to remove the DC component to reduce the drift due to integration. Secondly, the quadratic integration in frequency domain for concern components of the vertical and lateral ABA needs to be done. Thirdly, the displacement in lateral of the wheelset to rail needs to be calculated. Then the track alignment irregularity needs to be calculated by the integration of lateral ABA and the lateral displacement of the wheelset to rail.

By comparing with a commercial track geometry measurement system, the high-speed railway application results in different conditions, after removal of the influence of LDWR, identified that the proposed method can produce a satisfactory result.

This article helps realize detection of track irregularity on operating vehicle, reduce equipment production, installation and maintenance costs and improve detection density.

The purpose of this paper is to provide a comprehensive review of a non-contact full-field optical measurement technique known as digital image correlation (DIC).

The approach of this review paper is to introduce the research pertaining to DIC. It comprehensively covers crucial facets including its principles, historical development, core challenges, current research status and practical applications. Additionally, it delves into unresolved issues and outlines future research objectives.

The findings of this review encompass essential aspects of DIC, including core issues like the subpixel registration algorithm, camera calibration, measurement of surface deformation in 3D complex structures and applications in ultra-high-temperature settings. Additionally, the review presents the prevailing strategies for addressing these challenges, the most recent advancements in DIC applications across quasi-static, dynamic, ultra-high-temperature, large-scale and micro-scale engineering domains, along with key directions for future research endeavors.

This review holds a substantial value as it furnishes a comprehensive and in-depth introduction to DIC, while also spotlighting its prospective applications.

The paper aims to investigate the comfort-related performances of an innovative solar shading solution based on a new composite patented material that consists of a cement-based matrix coupled with a stretchable three-dimensional textile. The paper’s aim is, through a performance-based generative design approach, to develop a high-performance static shading system able to guarantee adequate daylit spaces, a connection with the outdoors and a glare-free environment in the view of a holistic and occupant-centric daylight assessment.

The paper describes the design and simulation process of a complex static shading system for digital manufacturing purposes. Initially, the optical material properties were characterized to calibrate radiance-based simulations. The developed models were then implemented in a multi-objective genetic optimization algorithm to improve the shading geometries, and their performance was assessed and compared with traditional external louvres and overhangs.

The system developed demonstrates, for a reference office space located in Milan (Italy), the potential of increasing useful daylight illuminance by 35% with a reduced glare of up to 70%–80% while providing better uniformity and connection with the outdoors as a result of a topological optimization of the shape and position of the openings.

The paper presents the innovative nature of a new composite material that, coupled with the proposed performance-based optimization process, enables the fabrication of optimized shading/cladding surfaces with complex geometries whose formability does not require ad hoc formworks, making the process fast and economic.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

Recently, powerful instruments for biomedical engineering research studies, including disease modeling, drug designing and nano-drug delivering, have been extremely investigated by researchers. Particularly, investigation in various microfluidics techniques and novel biomedical approaches for microfluidic-based substrate have progressed in recent years, and therefore, various cell culture platforms have been manufactured for these types of approaches. These microinstruments, known as tissue chip platforms, mimic in vivo living tissue and exhibit more physiologically similar vitro models of human tissues. Using lab-on-a-chip technologies in vitro cell culturing quickly caused in optimized systems of tissues compared to static culture. These chipsets prepare cell culture media to mimic physiological reactions and behaviors.

The authors used the application of lab chip instruments as a versatile tool for point of health-care (PHC) applications, and the authors applied a current progress in various platforms toward biochip DNA sensors as an alternative to the general bio electrochemical sensors. Basically, optical sensing is related to the intercalation between glass surfaces containing biomolecules with fluorescence and, subsequently, its reflected light that arises from the characteristics of the chemical agents. Recently, various techniques using optical fiber have progressed significantly, and researchers apply highlighted remarks and future perspectives of these kinds of platforms for PHC applications.

The authors assembled several microfluidic chips through cell culture and immune-fluorescent, as well as using microscopy measurement and image analysis for RNA sequencing. By this work, several chip assemblies were fabricated, and the application of the fluidic routing mechanism enables us to provide chip-to-chip communication with a variety of tissue-on-a-chip. By lab-on-a-chip techniques, the authors exhibited that coating the cell membrane via poly-dopamine and collagen was the best cell membrane coating due to the monolayer growth and differentiation of the cell types during the differentiation period. The authors found the artificial membrane, through coating with Collagen-A, has improved the growth of mouse podocytes cells-5 compared with the fibronectin-coated membrane.

The authors could distinguish the differences across the patient cohort when they used a collagen-coated microfluidic chip. For instance, von Willebrand factor, a blood glycoprotein that promotes hemostasis, can be identified and measured through these type-coated microfluidic chips.

The purpose of this research is to efficiently separate incident terahertz (THz) waves into distinct transmission and reflection channels by minimizing the absorption ratio. So, the optical systems operating within the THz frequency range can developed. To achieve a multi-band response, four different periodic arrays of graphene patterns are used. These arrays are strategically stacked on both sides of three SU-8 photoresists, serving as dielectric materials. Consequently, each layer exhibits a unique influence on the device's response, and by applying four external bias voltages, the behavior of the device can be precisely controlled and adjusted.

A novel optoelectronic device operating in the THz frequency range is introduced, using periodic arrays of graphene patterns and SU-8 photoresist dielectrics. The design of this device is based on meta-surface principles, using both the equivalent circuit model (ECM) and transmission line concept. The output of the device is a THz coupler implemented by analyzing the reflection and transmission channels. The structure is characterized using the ECM and validated through comprehensive full-wave simulations. By representing the electromagnetic phenomenon with passive circuit elements, enabling the calculation of absorption, reflection and transmission through the application of the theory of maximum power transfer.

Based on simulation results and theoretical analysis, the proposed device exhibits sensitivity to gate biasing, enabling efficient reflection and transmission of THz waves. The device achieves reflection and transmission peaks exceeding across the five distinct THz bands 90%, and its behavior can be tuned by external gate biasing. Moreover, the device's sensitivity to variations in geometrical parameters and chemical potentials demonstrates its reliable performance. With its outstanding performance, this high-performance meta-surface emerges as an ideal candidate for fundamental building blocks in larger optical systems, including sensors and detectors, operating within the THz frequency band.

The proposed device covers a significant portion of the THz gap through the provision of five adjustable peaks for reflection and transmission channels. Additionally, the ECM and impedance matching concept offers a simplified and time-efficient approach to designing the meta-surface. Leveraging this approach, the proposed device is effectively represented using passive circuit elements such as inductors, capacitors and resistors, while its performance is validated through the utilization of the finite element method (FEM) as a full-wave simulation tool. This combination of circuit modeling and FEM simulation contributes to the robustness and accuracy of the device's performance evaluation.

It is now well-established that good water quality is associated with economic prosperity, reduced incidence on public health and the good functioning of the various ecosystems found in our environment. Water contamination is mostly related to both diffused (agricultural lands and geologic rock degradations) and point sources of pollution. Mauritius has many water resources which depend solely on precipitation for their replenishment. Water parameters which are of relevance include total dissolved solids (TDS), temperature, pH, electrical conductivity, turbidity, dissolved oxygen, dissolved and particulate organic carbon and major cations and anions. The traditional methods of analysis for these parameters are mostly using electrical and optical methods (probes and sensors in the field), while chemical titrations, Flame AAS and High-Performance Liquid Chromatography techniques are carried out in the laboratory. Image Classification techniques using neural networks can also be used to detect the presence of contaminants in water. In addition to basic water quality parameters, the field sensors range have been extended to cover important major ions and can now be integrated with Artificial Intelligence (AI)-based models for the prediction of variations in water quality to better protect human health and the environment, reduce operation costs of water and wastewater treatment plant unit processes.