Search results

A remarkably bullish forecast of the growth prospects for Japan's optoelectronics industry was contained in a report on the industry published earlier this year by the Economics Division of the Long Term Credit Bank of Japan. The industry was seen as growing to be as important as the electronics industry, with which it was seen as forming the mainstay of Japan's future industry. Believing it would be of interest to a wider readership we publish here a shortened version of the report.

This paper sets out to give an overview about state‐of‐the‐art optical tomographic image reconstruction algorithms that are based on the equation of radiative transfer (ERT).

An objective function, which describes the discrepancy between measured and numerically predicted light intensity data on the tissue surface, is iteratively minimized to find the unknown spatial distribution of the optical parameters or sources. At each iteration step, the predicted partial current is calculated by a forward model for light propagation based on the ERT. The equation of radiative is solved with either finite difference or finite volume methods.

Tomographic reconstruction algorithms based on the ERT accurately recover the spatial distribution of optical tissue properties and light sources in biological tissue. These tissues either can have small geometries/large absorption coefficients, or can contain void‐like inclusions.

These image reconstruction methods can be employed in small animal imaging for monitoring blood oxygenation, in imaging of tumor growth, in molecular imaging of fluorescent and bioluminescent probes, in imaging of human finger joints for early diagnosis of rheumatoid arthritis, and in functional brain imaging.

The purpose of this paper is to investigate an optical‐based scanning modality for the real‐time measurements of automotive interior gaps.

The hardware is based on a charge‐coupled device detector acquiring a laser illumination. The laser is projected on multitude of substrates with different reflectivities and surface profiles; while the scanning is progressed manually through a hand‐held setup.

The proposed software identifies the optical gap location automatically and establishes a dynamic field of view.

The study conducts a tool reliability and repeatability study that yield an accuracy of 0.08 mm and a repeatability of less than 6.5 percent as user bias. The developed hardware/software combination, when compared with two commercial systems; a 3D scanner and an industrially packaged sensor unit used for exterior gaps, which provided repeatability values of 24 and 17 percent, respectively, with accuracies of 1.5 and 0.34 mm.

New hardware and software are developed in combination to operate effectively on different deco finish and gap separations.

Presents the scientific methodology from the enlarged cybernetical perspective that recognizes the anisotropy of time, the probabilistic character of natural laws, and the entry that the incomplete determinism in Nature opens to the occurrence of innovation, growth, organization, teleology communication, control, contest and freedom. The new tier to the methodological edifice that cybernetics provides stands on the earlier tiers, which go back to the Ionians (c. 500 BC). However, the new insights reveal flaws in the earlier tiers, and their removal strengthens the entire edifice. The new concepts of teleological activity and contest allow the clear demarcation of the military sciences as those whose subject matter is teleological activity involving contest. The paramount question “what ought to be done”, outside the empirical realm, is embraced by the scientific methodology. It also embraces the cognitive sciences that ask how the human mind is able to discover, and how the sequence of discoveries might converge to a true description of reality.

A multi-laser sensors-based measurement instrument is proposed for the measurement of geometry errors of a differential body and quality evaluation. This paper aims to discuss the aforementioned idea.

First, the differential body is set on a rotation platform before measuring. Then one laser sensor called as “primary sensor”, is installed on the intern of the differential body. The spherical surface and four holes on the differential body are sampled by the primary sensor when the rotation platform rotates one revolution. Another sensor called as “secondary sensor”, is installed above to sample the external cylinder surface and the planar surface on the top of the differential body, and the external cylinder surface and the planar surface are high in manufacturing precision, which are used as datum surfaces to compute the errors caused by the motion of the rotation platform. Finally, the sampled points from the primary sensor are compensated to improve the measurement accuracy.

A multi-laser sensors-based measurement instrument is proposed for the measurement of geometry errors of a differential body. Based on the characteristics of the measurement data, a gradient image-based method is proposed to distinguish different objects from laser measurement data. A case study is presented to validate the measurement principle and data processing approach.

The study investigates the possibility of correction of sensor data by the measurement results of multiple sensors to improving measurement accuracy. The proposed technique enables the error analysis and compensation by the geometric correlation relationship of various features on the measurand.

The proposed error compensation principle by using multiple sensors proved to be useful for the design of new measurement device for special part inspection. The proposed approach to describe the measuring data by image also is proved to be useful to simplify the measurement data processing.

The proper matching of industry structure to strategy is expected to have a positive impact upon organisational performance. This relationship has not been fully examined in the defence industry. The central aim of this paper is to link the competitive performance of small, high technology defence firms to their ability to adapt to industry structure changes. With this in mind a study was conducted to extend Porter's (1980) framework of the strategic management of industry structural change. The study draws upon the experiences of 40 small, high technology defence firms in the UK. Firms in the sample range from 5 to 200 employees, and £50,000 to £10m sales turnover. The study broadens the findings of exploratory research undertaken in the buying department of two large defence firms. A questionnaire was designed to identify macro level phenomena and detail hypotheses generated by the case studies. The empirical analysis of the creation and sustaining of competitive advantages will focus on strategic determinants, and inter‐organisational variables that influence the performance of small firms in tendering for defence sub‐contracts.

FOV splicing optical remote sensing instruments have a strict requirement for the focal length consistency of the lens. In conventional optical-mechanical structure design, each optical element is equally distributed with high accuracy and everyone must have a high machining and assembly accuracy. For optical remote sensors with a large number of optical elements, this design brings great difficulties to lens manufacture and alignment.

Taking the relay lens in an optical remote sensing instrument with the field of view splicing as an example, errors of the system are redistributed to optical elements. Two optical elements, which have the greatest influence on modulation transfer function (MTF) of the system are mounted with high accuracy centering and the other elements are fixed by gland ring with common machining accuracy. The reduction ratio consistency difference among lenses is compensated by adjusting the optical spacing between the two elements.

Based on optical system simulation analysis, the optimized structure can compensate for the difference of reduction ratio among lens by grinding the washer thickness in the range of ±0.37 mm. The test data for the image quality of the lens show that the MTF value declined 0.043 within ±0.4 mm of space change between two barrels. The results indicate that the reduction ratio can be corrected by adjusting the washer thickness and the image quality will not obviously decline.

This paper confirms that this work is original and has not been published elsewhere nor is it currently under consideration for publication elsewhere. In this paper, the optimum structural design of the reduction relay lens for the field of view stitching applications is reported. The method of adjusting washer thickness is applied to compensate for the reduction ratio consistency difference of lenses. The optimized structure also greatly reduces the difficulty of lenses manufacture, alignment and improves the efficiency of assembly.

This paper aims to improve the performance of the autonomous optical navigation using relativistic perturbation of starlight, which is a promising technique for future space missions. Through measuring the change in inter-star angle due to the stellar aberration and the gravitational deflection of light with space-based optical instruments, the position and velocity vectors of the spacecraft can be estimated iteratively.

To enhance the navigation performance, an integrated optical navigation (ION) method based on the fusion of both the inter-star angle and the inter-satellite line-of-sight measurements is presented. A Q-learning extended Kalman filter (QLEKF) is designed to optimize the state estimate.

Simulations illustrate that the integrated optical navigation outperforms the existing method using only inter-star angle measurement. Moreover, the QLEKF is superior to the traditional extended Kalman filter in navigation accuracy.

A novel ION method is presented, and an effective QLEKF algorithm is designed for information fusion.