Search results

The study attempts to estimate farm subsidies the governments can save by transitioning to a millet-based production system, replacing GHG emission-intensive crops.

It updates a 131 × 131 commodity input–output (IO) table of the year 2015–16 into 2021–22 using the RAS procedure and simulates the economy-wide impacts of replacing rice and wheat with pearl millet and sorghum using consumption and production approaches. It then quantifies fertilizer, electricity and credit subsidy expenses the government can save through this intervention. It also estimates the potential reduction in GHG emissions that the transition could bring about. India is taken as a case.

Results show pearl millet expansion brings greater benefits to the government. It is estimated that when households return to their pearl millet consumption rates that prevailed in the early-reform period, this could save the Indian government Rs. 622 crores (USD 75 m). The savings shall be reinvested in agriculture to finance climate adaptation/mitigation efforts, contributing to a sustainable food system. Net GHG emissions also decline by 3.3–3.6 MMT CO2e.

Indian government has been actively aiming to bring down paddy areas since 2013–14 through the Crop Diversification Program and promoting millets (and pulses and oilseeds) on these farms. The prime reason is to check rapidly declining groundwater irrigation in Green Revolution states. Regulations in the past in these states have not brought the intended results. Meanwhile, electricity and fertilizers are heavily subsidized for agriculture. A slight shift in the cropping system can help conserve these resources. Meanwhile, GHG emissions could also be brought down and subsidies could well be saved. The results of the study indicate the same.

A less warm society is what governments and nongovernment organizations across the world are aiming for at present. Financial implications affect actions against climate change to a greater extent, apart from technological innovations. The effects of policy strategies discussed in the study, taking a large country as a case, when implemented appropriately around the regions, could help move a step closer to action against climate change.

The paper addresses a key but rarely explored research issue – that how a climate-sensitive crop choice will help reduce the government’s fiscal burden to finance climate adaption/mitigation. It also offers a mechanism to estimate the benefits within an economy-wide framework.

This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.

In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.

This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.

The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.

This paper aims to draw lessons for telecommunications (telecom) network deployment in India, from a study of policy and regulatory approaches taken by other federal administrations in streamlining processes for site clearances, grant of rights of way (RoW) and approvals for local infrastructure deployment and sharing. With the urgent need for setting up small cells and rapid fiberisation of networks in the 5G era, the importance of such processes has gained prominence.

The authors adopt qualitative thematic content analysis with three-tier coding and classification to identify themes in archival and current documentary data and information obtained from subject-matter experts in the countries studied.

Formulation and implementation of telecom policy is led by national governments. However, national telecom administrations, in recognition of new needs, have co-opted states and local authorities as partners in development of telecom networks, providing the overall framework, guidance and appropriate incentives where required.

This cooperative model could work well in India, where telecom policy making and regulation is the prerogative of the central government, but administration of RoW and local clearances for cable laying, tower siting and associated infrastructure activities for expanding telecom networks are left to decentralised decision-making in the states and local bodies.

This research attempts to sytematise, thematise and draw cross-country comparisons to inform regulatory and administrative policy for 5G infrastructure rollout in India.

The challenges faced by China's high-end equipment manufacturing (HEEM) industry are becoming clearer in the process of global supply chain (GSC) reconfiguration. The purpose of this study is to investigate how China's HEEM industry has been affected by the GSC reconfiguration, as well as its short- and long-term strategies.

The authors adopted a multi-method approach. Interviews were conducted in Phase 1, while a three-round Delphi survey was conducted in Phase 2 to reach consensus at the industry level.

The GSC reconfiguration affected China's HEEM supply chain (SC). Its direct effects include longer lead times, higher purchasing prices and inconsistent supply and inventory levels of key imported components and materials. Its indirect effects include inconsistent product quality and cash flows. In the short term, China's HEEM enterprises have sought to employ localized substitutes, while long-term strategies include continuous technological innovation, industry upgrades and developing SC resilience.

This study not only encourages Chinese HEEM enterprises to undertake a comprehensive examination of their respective industries but also provides practical insights for SC scholars, policymakers and international stakeholders interested in how China's HEEM industry adapts to the GSC reconfiguration and gains global market share.

Recently, powerful instruments for biomedical engineering research studies, including disease modeling, drug designing and nano-drug delivering, have been extremely investigated by researchers. Particularly, investigation in various microfluidics techniques and novel biomedical approaches for microfluidic-based substrate have progressed in recent years, and therefore, various cell culture platforms have been manufactured for these types of approaches. These microinstruments, known as tissue chip platforms, mimic in vivo living tissue and exhibit more physiologically similar vitro models of human tissues. Using lab-on-a-chip technologies in vitro cell culturing quickly caused in optimized systems of tissues compared to static culture. These chipsets prepare cell culture media to mimic physiological reactions and behaviors.

The authors used the application of lab chip instruments as a versatile tool for point of health-care (PHC) applications, and the authors applied a current progress in various platforms toward biochip DNA sensors as an alternative to the general bio electrochemical sensors. Basically, optical sensing is related to the intercalation between glass surfaces containing biomolecules with fluorescence and, subsequently, its reflected light that arises from the characteristics of the chemical agents. Recently, various techniques using optical fiber have progressed significantly, and researchers apply highlighted remarks and future perspectives of these kinds of platforms for PHC applications.

The authors assembled several microfluidic chips through cell culture and immune-fluorescent, as well as using microscopy measurement and image analysis for RNA sequencing. By this work, several chip assemblies were fabricated, and the application of the fluidic routing mechanism enables us to provide chip-to-chip communication with a variety of tissue-on-a-chip. By lab-on-a-chip techniques, the authors exhibited that coating the cell membrane via poly-dopamine and collagen was the best cell membrane coating due to the monolayer growth and differentiation of the cell types during the differentiation period. The authors found the artificial membrane, through coating with Collagen-A, has improved the growth of mouse podocytes cells-5 compared with the fibronectin-coated membrane.

The authors could distinguish the differences across the patient cohort when they used a collagen-coated microfluidic chip. For instance, von Willebrand factor, a blood glycoprotein that promotes hemostasis, can be identified and measured through these type-coated microfluidic chips.

The main purpose of this paper was to evaluate the validation process of food safety control measures.

The validation of control measures has been analyzed at 50 food companies in Serbia. The sample included companies that produce food of both plant and animal origin and have certified food safety management systems. A total of 156 control measures that combat physical hazards (41.6%), followed by microbial hazards (34.0%) and chemical hazards (24.4%), have been analyzed. To enable quantification of the validation protocols, each control measure was assigned a score.

The validation scores showed that the highest level of validation was observed in large companies, as opposed to small and medium-sized companies (p < 0.05). The type of food safety hazards and the food sector did not reveal any statistical differences in-between the scores. The main approach to validating control measures was referring to the technical documentation of equipment used (52.6%), followed by scientific and legal requirements (30.7%). Less than 20% of the analyzed control measures were validated with operational data collected on-site. No mathematical modeling was observed for the sampled food companies. Future steps should include the development of validation guides for different types of control measures and training modules.

This study can serve as an improvement guide for food safety consultants, food safety auditors, certification bodies, inspection services, food technologists and food managers.

This study is one of the first to provide an insight into how food companies validate their control measures to combat microbial, chemical and physical food safety hazards.

The expansion of connectivity on a national scale in Brazil, whether through mobile Internet or fixed broadband, is described as one of the factors that can lead to social and economic benefits for large parts of the population who do not have a network connection. It can also help to reduce poverty by improving the infrastructure of services and increasing Internet use for education purposes. It also provides people with the ability to communicate with online administrative services – local, regional, and national. In Brazil, the main difficulty facing an effective universalization of telecommunications has been limitations in accessing services. This chapter demonstrates the relevance of small Internet providers for the expansion of fixed broadband in less commercially attractive regions (in terms of subscribers, income, and distance) who have been growing over recent years and are now present in 70% of Brazilian municipalities and whose role is paramount to reducing the digital divide.

The current and modern electrical distribution networks, named smart grids (SGs), use advanced technologies to accomplish all the technical and nontechnical challenges naturally demanded by energy applications. Energy metering collecting is one of these challenges ranging from the most basic (i.e., visual assessment) to the expensive advanced metering infrastructure (AMI) using intelligent meters networks. The AMIs’ data acquisition and system monitoring environment require enhancing some routine tasks. This paper aims to propose a methodology that uses a distributed and sustainable approach to manage wide-range metering networks, focused on using current public or private telecommunication infrastructure, optimizing the implementation and operation, increasing reliability and decreasing costs.

Inspired by blockchain technology, a collaborative metering system architecture is conceived, managing massive data sets collected from the grid. The use of cryptography handles data integrity and security issues.

A robust proof-of-concept simulation results are presented concerning the resilience and performance of the proposed distributed remote metering system.

The methodology proposed in this work is an innovative AMI solution related to SGs. Regardless of the implementation, operation and maintenance of AMIs, the proposed solution is unique, using legacy and new technologies together in a reliable way.

Personal Protective Equipment plays an inevitable part in the current scenario of pandemics in the world. A novel coronavirus, Severe Acute Respiratory Syndrome-Corona Virus-2 (SARS-Cov 2), began as an outbreak of pneumonia in Wuhan, China, in late December 2019, and quickly spread worldwide. It quickly escalated into an international public health crisis. This opened up the high demand for the innovation and research of new materials in the Personal Protective Equipment industry.

PubMed, Embase and Google Scholar were searched for relevant literature regarding personal protective equipment and the information was organized in a systematic way.

There are no adequate number of studies taken up in the field of use of textiles in medical applications especially with PPEs.

This structured review will generate a sense of the significance of using PPE for controlling pandemics and also awaken need for additional research and innovations in this area.

The authorities of the management should take timely intervention in choosing the right material for their PPE in their hospitals. Hence health care professionals teams have an inevitable role in preventing the adverse environmental impact due to the inadvertent disposal of PPEs.

There is a lack of systematic way of disposing contaminated single-use face masks in a safe, environmentally acceptable manner. The dumping of single-use PPE in domestic garbage has had an adverse effect on the environment. Mismanaged plastic waste endangers the health of ecosystems by polluting marine and terrestrial environments, posing a significant risk of ingestion or injury to animals and contaminating habitats.

This review article provides an in-depth review of the use of different materials in PPE and challenges regarding its long-term use and implications on the environment.

This study aims to prevent occupational accidents occurring in the manufacturing industry by means of touch sensors. When the occupational accidents occurring in the manufacturing industry around the world are examined, it is seen that approximately 88% of occupational accidents occur from “dangerous movement” and 10% from “dangerous situation.” Although some studies related to safety culture studies, safety studies in design and collective or personal protective measures have been started, they have not been brought to an adequate level. It is observed that studies on dangerous movements continue even in many developed countries. In this study, first of all, a literature study was conducted. Occupational accidents experienced in the manufacturing sector in Turkey have been examined. In line with these investigations, a prototype circuit protection system has been developed that can prevent accidents caused by dangerous movement. With the circuit, its applicability and effectiveness were measured by conducting experiments on different manufacturing machines. The prototype circuit applied in this paper was made based on the logic of protective measures made on sawstop machines used in different sectors. In the experimental study conducted, it was observed that in 30 experiments conducted with a prototype on ten separate manufacturing machines, it stopped the machines 26 times at minimum and 29 times at maximum. On average, when looking at the system efficiency values, it was seen that the system was 81.6% effective, and it was observed that positive results could be obtained when converted into a real product.

In this study, their contribution to the prevention of work accidents caused by presses and rotary accents from machines used in the manufacturing industry by means of touch sensors used in Industry 4.0 was examined.

With Industry 4.0, different automation systems began to be switched in many areas and sectors. Studies have started on different sensors used also in Industry 4.0 in occupational health and safety studies, but it is seen that they have not been applied at an adequate level. It should be designed in such a way as to prevent errors or stop these errors in the studies performed. Today, sensors are produced at much lower costs than before. In addition, the constantly developing technology provides great convenience for these applications.

This study was applied for press and cylinder machines from manufacturing machines. This study has been tried for machines producing a maximum pressure of 300 tons.

A prototype was designed. Trials were done on some machines by prototype. There could be improve and find different solutions for safety problems in the industry with this perspective.