Search results

In the past decades, the desire to use natural source foods has increased because of environmental compatibility, safety and appropriate costs. Sonication is used in food industry owing to its short duration of process and saving energy. The purpose of this study is to investigate the effect of various maize starches in the batter on the oil absorption and quality assessment (moisture content) of chicken nuggets by using five mathematical models.

To determine the effects of different maize starches on oil absorption parameters, 5 per cent starches native, sonicated starch were substituted in batter instead of wheat flour. Suspensions contained native starch were treated with sonication (70 kHz, 5 min) using an ultrasound probe set. Samples were fried in a fryer at 150, 170 and 190°C for 1, 3and 5 min, respectively. Models were compared with R² and Arrhenius equation for estimating model prediction sufficiency.

Obtained results represented that between different formulated samples, maize starch with high temperature had main significant effect (p < 0.05) on moisture content of nuggets. During frying, the amount of oil loses significantly (p < 0.05) depended on temperature and time and sonication treatment.

Incorporation of sonication with maize starch at higher temperature on quality assessment has not been found.

The most widely recycled plastic in the world is recycled polyethylene terephthalate (rPET). To minimize the environmental related issues associated with synthetic fibers, several researchers have explored the potential use of recycled polyester fibers in developing various technical textile products. This study aims to develop needle-punched nonwoven fabrics from recycled polyester fibers and investigate its suitability in oil spill cleanup process.

According to Box and Behnken factorial design, 15 different needle-punched nonwoven fabrics from recycled polyester fibers were prepared by changing the parameters, namely, needle punch density, needle penetration depth and fabric areal weight. Several featured parameters such as oil sorption, oil retention, oil sorption kinetics, wettability and reusability performance were systematically elucidated.

The maximum oil sorption of recycled nonwoven polyester is found to be 24.85 g/g and 20.58 g/g for crude oil and vegetable oil, respectively. The oil retention is about 93%–96% in case of crude oil, whereas 87%–91% in case of vegetable oil. Recycled polyester nonwoven possesses good hydrophobic–oleophilic properties with static contact angle of 138° against water, whereas 0° against crude oil and vegetable oil. The reusability test results indicate that recycled polyester nonwoven fabric can be used several times because of its reusability features.

There is no detailed study on the oil sorption features of needle-punched nonwoven fabrics developed from recycled polyester fibers. This study is expected to help in developing fabrics for oil spill cleanups.

The aim of this study was to explore the feasibility of formulation, quality characterization and acceptability of rice flour- and black gram flour-incorporated mutton snack among consumers. Cereal-based snacks, which have very less nutritional value, are highly popular among Indian consumers. Malnutrition and protein deficiencies can be overcome by supplying nutrient-dense meat-incorporated cereal-based snacks to them. On this background, it was planned to incorporate easily available sheep meat to popular snack to improve the nutritional quality, acceptability and functionality of traditional snack.

Mutton-based snack formulation was standardized; rice flour (Treatment-I [T-I]), black gram flour (Treatment-II [T-II]) and their combination (Treatment-III [T-III]) were used along with lean meat for the preparation of mutton snack. Microwaving and frying process of cooking was applied, and various physicochemical and sensory properties of both raw and cooked snack were evaluated.

Emulsion stability and expansion percentage increased significantly (p < 0.05) in all treatment products in both cooking process except in T-III. Significant (p < 0.05) decrease in protein percentage and increase in fat percentage has been recorded in all treatments and cooking process in comparison to control. The overall acceptability scores increased significantly in all the treatments except T-III in comparison to control. On the basis of physicochemical and sensory attributes the microwaved black gram flour-added mutton snack (T-II) was adjudged as most acceptable and was stored for a period of 45 days at ambient temperature. It was concluded that optimized product could be stored at room temperature in LDPE pouches for 45 days without marked deterioration in quality on the basis of evaluations of physicochemical (pH and thiobarbituric acid reacting substances value) and microbiological parameters (total plate count, coliform count and yeast and mould count).

Future research may benefit from attempting to modify shelf life of the snack in room temperature by modifying storage and packaging condition.

Although incorporation of meat in cereal-based traditional snack and the effect on its quality characteristics have been extensively examined, limited research has focused on this aspect. Additionally, limited qualitative research has examined the storage characteristics of meat-incorporated snack at room temperature in eating quality context.

The purpose of this paper is to study the influence of crude palm oil (PO), canola oil (CO) and their blends on characteristics of fried plantain crisps at two different stages of ripening.

Plantain (Musa paradisiaca L.) samples were peeled, sliced into 3 mm slices, blanched at 70 °C for 3 min and dried. The slices were deep fried at 180 °C for different times.

There was no significant difference (p > 0.05) in the moisture loss rate and the crispiness of the crisps produced using PO and CO. Significant differences (p < 0.05) existed in the fat uptake and color properties of the crisps fried in the two oils. PO fried crisps absorbed 15 percent less oil in the unripe crisps samples and 21 percent less oil in the fully ripened crisps than CO. The browning index showed that the PO crisps had greater color changes than the crisps fried using CO. The difference between the crisps from 50:50 blends of PO: CO and CO was not statistically significant, while 70:30 blends improved the qualities of the crisps better than CO alone. Analysis of kinetics data showed that moisture loss, oil uptake and browning index followed a first-order kinetics model.

Understanding the interactions between ripening and processing methods is enhanced and use of crude PO for industrial deep-fat frying is encouraged.

The purpose of this paper is to investigate the effect of incorporation of selected additives on fat uptake and sensory quality of two traditional deep fried snacks.

A wheat‐based snack Diamond cuts, and a rice and gram‐based spicy snack Kodbale, were chosen. The products were prepared by incorporating to the dough, 0.2, 0.5, 0.75 and 1.0 per cent of 11 different additives like gum acacia, gum Tragacanth, Methylcellulose, Gaur Gum, Pectin, Gum Karaya, Gum Carageenan, Xanthan Gum, Gum Gellan, Seafoam and Beligara. Products were evaluated for sensory attributes and fat uptake was estimated by soxhlet extraction.

Results indicated that average fat uptake in Diamond cuts and Kodbale was 28.00 and 30 per cent, respectively. In Diamond cuts, while addition of additives did not alter fat uptake remarkably, a slight decrease in the case of gum Tragacanth (0.2 per cent) and Gaur Gum and Gum Carageenan (0.75 per cent) was observed. Statistical analysis of sensory attributes revealed only a marginal difference in textural quality of Diamond cuts incorporated with Gaur Gum, Pectin and Beligara. In Kodbale, fat uptake was marginally lowered by the addition of Gaur Gum, gum Tragacanth, Xanthan Gum and Gum Carageenan at 0.75 per cent. No significant differences were observed among the sensory qualities except for marginal differences in textural quality of Kodbale incorporated with Gaur Gum, Gum Carageenan and Beligara. It can be concluded that addition of additives did not influence the fat uptake or sensory quality of fried products studied to a significant extent.

Since some of the additives improved textural quality of products and fried products are usually stored and consumed, these additives can probably help in improving the texture of stored products. Further studies in this area would help in confirming this.

Deep-fried banana (Musa spp.) fritters is one of the frequently consumed fruit based snacks in Southeast Asian countries despite its substantial amount of oil content. Consistent with the demand for low fat food with maintained palatability, this study aimed to determine the quality of banana fritters as affected by batter system containing selected hydrocolloids such as pectin (PCN), whey protein isolate (WPI) and soy protein isolate (SPI).

Banana fritter batters were prepared with individual addition of 2% PCN (w/w), 10% WPI (w/w), 10% SPI (w/w), combination of 2% PCN and 10% WPI, combination of 2% PCN and 10% SPI and control (without hydrocolloid addition). Batter viscosity (Pa.s) and batter pick-up (%) were determined. Banana fritters were analysed for moisture and fat contents, moisture loss, colour, hardness and sensory characteristics.

Hydrocolloid addition in the batter system resulted in a higher batter pick-up and viscosity in comparison to control batter system. Moisture loss from banana fritters with batter formulation of 2% PCN and 10% SPI was the lowest while the reduction in oil content (55%) was the highest. Banana fritters with inclusion of hydrocolloids in the batter formulation were equally accepted as the control sample by the sensory panelists with a score range between 6 and 7 for most of the sensory attributes evaluated except for oiliness.

Application of PCN and SPI in batter system to develop banana fritters with low oil content, moist fruit core and crunchy crust is reported for the first time. Batter premix containing PCN and SPI can be produced for fresh and frozen fritters preparation.

Fat occurs in meals either because it forms part of the ingredients or because of the cooking or garnishing methods used. We found that many traditional practices considerably increased the quantity of fat in a dish.

This study aims to investigate the physicochemical and sensory characteristics of fried peanut cracker snacks coated with wheat (80%) and cassava (20%) composite flours.

The peanuts were sorted, boiled, drained, roasted, coated and fried at temperature of 150–180°C for 154.6–240 s. The fried peanut cracker-coated (FPCC) snacks produced were analyzed for proximate composition (moisture, crude fat, crude protein, crude fibre, total ash and carbohydrate contents), rancidity indices (peroxide value, free fatty acid and iodine value), physical properties, colour (lightness, redness and yellowness), texture (hardness, fracturability, adhesiveness and cohesiveness) and sensory qualities (taste, crispiness, colour, odour and overall acceptability).

There were significant differences in moisture (p = 0.000), crude fat (p = 0.001), crude protein (p = 0.000), crude fibre (p = 0.001), total ash (p = 0.00) and carbohydrate (p = 0.001). The range of values for moisture content, crude fat, crude protein, crude fibre, total ash and carbohydrate contents were 2.6%–4.9%, 27.1%–34.7%, 21.0%–26.3%, 3.1%–4.1%, 2.1%–2.5% and 33.9%–36.4%, respectively, while peroxide, free fatty acid and iodine values ranged from 1.2 to 2.0 mEq/kg, 32.8–47.0 mg KOH/g and 1.2–2.0 gI₂/100 g, respectively. The physical properties of the FPCCs showed decrease as the frying temperature and time increased. The values for lightness (L*), redness (a*) and yellowness (b*) ranged from 26.5 to 52.2, 11.4 to 22.0 and 37.0 to 42.5, while the texture attributes such as hardness (p = 0.001), fracturability (p = 0.023), adhesiveness (p = 0.001) and cohesiveness (p = 0.011) were significantly different and it ranged from 28.7 to 53.4 N, 28.6 to 48.3 N, 1.0 to 2.4 N/s and 0.0–0.1, respectively. The sensory score for wheat–cassava composite flours used for coating the snacks decreased as the frying temperature and time increased. The study shows that 20% of cassava flour incorporated into the formulation of coated snacks does not affect its overall acceptability.

There are scanty information/published works on physicochemical and sensory characteristics of fried peanut cracker coated with wheat–cassava composite flour.

This research work helps in producing fried peanut cracker coated with composite wheat–cassava flours.

The study shows that 20% of cassava flour incorporated into the formulation of coated snacks does not affect its overall acceptability.