Search results

This paper aims to design a single and double throat oil groove structure, which can reduce the drag torque of the wet clutch.

A three-dimensional simulation model was established herein using the computational fluid dynamics method. The influence of oil groove structure on the oil film flow field and the drag torque is obtained by a simulation.

Compared with the traditional radial oil groove, the results show that the single throat oil groove structure reduces the drag torque by about 24.59%; the double throat oil groove reduces the drag torque by about 47.27%. As the speed difference increases, the average temperature rise of the oil film of the double throat oil groove is 4°C lower than that of the single throat oil groove, indicating that it has good heat dissipation performance. The analysis results were verified by experimental results.

In this paper, the radial oil groove is taken as the reference object, and the structure of the oil groove is designed and improved. The simulation analysis and experiment verify the rule of the influence of the oil groove structure on the drag torque, which provides a new design idea for reducing the drag torque of wet clutch.

In this paper, a kind of an oil groove structure which could improve the transmission torque of an oil film was designed, i.e. the width and depth of oil groove gradually decrease with the increase in the radius.

Effects of the structural parameters of the oil groove on the hydro-viscous drive (HVD) characteristics with variable rotational speed were investigated by means of numerical calculation.

Research results show that with the decrease of the width and depth of the oil groove at the outer diameter, transmission torque increases, while the temperature is almost unchanged. Keeping the effective area unchanged, comparing the transmitted torque under the oil groove angle θ₂ = 0.5° and θ₂ = 4.5°, the former was almost 200 per cent of the latter; the torque transmitted with h₂ = 0.05 mm was almost 150 per cent of that with h₂ = 0.2 mm.

In this paper, the authors analyze the friction surface of the friction plate between the oil groove, oil distribution and oil film transfer torque from the oil groove structure parameters and found methods to improve the transmission torque. For the first time, the influence of the structural parameters of oil groove on the characteristics of HVD was studied under the condition of variable rotational speed, and a better method to improve the transmission torque was proposed.

The purpose of this paper is to study the influence of structural parameters of oil groove (such as central angle number, depth and so on) on pressure, flow, load capacity and transmitted torque between friction pairs of hydro-viscous clutch.

According to the working process of friction pairs of hydro-viscous clutch, mathematical models of hydrodynamic load capacity and torque transmitted by the oil film were built based on viscosity-temperature property. Then analytical solutions of pressure, flow, load capacity and transmitted torque were obtained; effects of central angle of oil groove zone and friction contact zone, oil film thickness, number of oil grooves on pressure, flow, load capacity and torque were studied theoretically.

The research found that the central angle of oil groove zone, number of oil grooves and oil groove depth have similar effects on flow, which means that with the increase of central angle, number or depth of oil grooves, the flow also increases; pressure in friction contact zone and oil groove zone drops along radial direction, whereas its value in oil groove zone is higher. With the increase of the central angle of oil groove zone, pressure in friction contact zone and friction contact zone rises, and the load capacity increases, whereas the transmitted torque drops. Number of oil grooves has little effect on load capacity. When the oil film thickness increases, its flow increases accordingly, whereas the pressure, load capacity and transmitted torque drops. Meanwhile, the transmitted torque decreases with the increase of number of oil grooves, whereas the oil groove depth nearly has no effects on transmitted torque.

In this paper, mathematical models of hydrodynamic load capacity and torque transmitted by oil film were built based on viscosity-temperature property in the working process of hydro-viscous clutch, and their analytical solutions were obtained; effects of structural parameters of oil groove on transmission characteristics of hydro-viscous clutch based on viscosity-temperature property were revealed. The research results are of great value to the theory development of hydro-viscous drive technology, the design of high-power hydro-viscous clutch and relative control strategy.

The hydro-viscous drive (HVD) has been widely used in fan transmission in vehicles, fans, and scraper conveyors for step-less speed regulating and soft starting. It is an efficient method to save energy and reduce consumption. This study aims to analyze the influencing factors of oil film shear torque accurately.

The shear torque calculation model of double arc oil groove friction pairs was established. The influence of groove structure parameters on shear torque was analyzed. The interaction between viscosity temperature and shear torque was considered. Meanwhile, the equivalent radius was calculated when the rupture of oil film appeared. Finally, the test rig of torque characteristics was set up. The variance of shear torque with the input rotation speed under different oil film thickness, different oil temperature, and different flow rate was seen.

The results show that the shear torque increases with the growth of rotation speed. However, the increase of torque is quite gradual because of the effect of the change of viscosity, which is caused by the rise of temperature. The shear torque increases with the decrease of thickness, the increase of inlet flow rate, and the decrease of inlet oil temperature. Meanwhile, when the feeding flow rate is less than the theoretical, the oil film gets ruptured and the shear torque decreases sharply.

The influence on shear torque during full film shear stage in HVD can be achieved much more accurately through both experimental research and theoretical modeling in which groove parameters, influence of temperature, and oil film rupture are considered. Therefore, the shear torque of HVD can be predicted by theoretical model and experimental research in full film shear stage.

Hydro-viscous drive (HVD) clutches are widely used in equipment requiring soft start, such as fans and pumps, to transmit torque and adjust speed by changing the gap distance between friction pairs. This paper aims to propose a novel two-parameter evaluation method for HVD during the mixed lubrication stage. The objective is to develop an effective model that establishes the relationship between these parameters and the actual surface topography.

In the presented methods, the fractal features of the real manufacturing surface are calculated based on the power spectrum function by the ultra-depth three-dimensional microscope. After that, the hybrid friction model of the friction plate is established based on mixed elasto-hydrodynamic lubrication theory, boundary friction model and fractal theory. Then the torque and load bearing characteristics of the clutch are obtained, and the influences of the surface fractal features are investigated and discussed. Finally, the Weierstrass–Mandelbrot function is adopted for the surface topography characterization and evaluation.

The results indicate that the proposed method exhibits good accuracy, while the speed difference between the friction pair exceeds 2,500 rpm. It is concluded that this paper proposed a way to evaluate the torque and loading capacity of HVD considering the real manufacturing surface topography and is helpful for surface optimization.

The originality and value of this study lie in its development of a novel torque and load bearing capacity evaluation method for HVD in mixed lubrication stage, considering manufacturing surface topography and describing the real manufacturing surface.

The purpose of this paper is to study the influence of different cross-sectional shapes (rectangular, trapezoidal, oval and triangular) and layout forms of oil grooves (radial, circumferential, inclined, compound, helical and double-helical), and determine the optimal section shape and layout form of oil grooves on the temperature field.

Heat conduction theory model was established based on startup characteristics and friction heat principle of hydro-viscous clutch (HVC), and then the theoretical expression of angular velocity of the friction pair and control pressure were deduced, and the heat flux and its distribution on friction disk and separator disk were calculated. Finally, the finite element method was used to solve the temperature field of the friction pair.

The studies show that the circumferential oil groove got the highest temperature, and on the surface of all other structures, hot spots appear with different sizes and temperatures, and the maximum temperature difference in the friction zone is about 3°C, and in the oil groove zone is about 16°C, wherein the compound oil groove has the lowest average temperature. This research shows that the compound oil groove with rectangular cross-section is the best choice for the friction pair.

In this paper, it was found that the compound oil groove with rectangular cross-section is the best choice for the friction pair, and it provided a favorable theory reference and technical support for the structural design of the friction pair and optimized design of the high-power HVC.

This study aims to investigate the effects of irregular groove textures on the friction and wear performance of sliding contact surfaces. These textures possess multiple depths and asymmetrical features. To optimize the irregular groove texture structure of the sliding contact surface, an adaptive genetic algorithm was used for research and optimization purposes.

Using adaptive genetic algorithm as an optimization tool, numerical simulations were conducted on surface textures by establishing a dimensionless form of the Reynolds equation and setting appropriate boundary conditions. An adaptive genetic algorithm program in MATLAB was established. Genetic iterative methods were used to calculate the optimal texture structure. Genetic individuals were selected through fitness comparison. The depth of the groove texture is gradually adjusted through genetic crossover, mutation, and mutation operations. The optimal groove structure was ultimately obtained by comparing the bearing capacity and pressure of different generations of micro-convex bodies.

After about 100 generations of iteration, the distribution of grooved textures became relatively stable, and after about 320 generations, the depth and distribution of groove textures reached their optimal structure. At this stage, irregular texture structures can support more loads by forming oil films. Compared with regular textures, the friction coefficient of irregular textures decreased by nearly 47.01%, while the carrying capacity of lubricating oil films increased by 54.57%. The research results show that irregular texture structures have better lubrication characteristics and can effectively improve the friction performance of component surfaces.

Surface textures can enhance the friction and lubrication performance of metal surfaces, improving the mechanical performance and lifespan of components. However, surface texture processing is challenging, as it often requires multiple experimental comparisons to determine the optimal texture structure, resulting in high trial-and-error costs. By using an adaptive genetic algorithm as an optimization tool, the optimal surface groove structure can be obtained through simulation and modeling, effectively saving costs in the process.

The purpose of this paper is to improve the bearing capacity and mechanical properties of the oil pocket.

In this paper, a straight-through labyrinth seal is installed in an oil sealing belt. The main structure of hydrostatic support system (HSS) is introduced, and the factors affecting the leakage loss are analyzed. The governing equations involving the momentum equation and the continuity equation for the land section and groove section are established separately based on the three-control-volume theory. To explain the flow capability of the straight-through labyrinth seal, the labyrinth seal with different clearance widths, groove numbers, groove depths and pressure difference is calculated. The results of the simulation are compared and analyzed.

The groove dimensions and groove numbers have important impact on the leakage and flow pattern of the seal.

The fluid flow was simulated by commercial tools executed in the ANSYS Fluent, the computational fluid dynamics (CFD) solver and a steady state scheme with the realizable k-ε turbulence model was applied. The cavity structure of the straight-through labyrinth seal, forming turbulence eddy flows in the groove, which is a valid approach to convert turbulence kinetic energy into thermal energy, reduce leakage mass flow.

This research can provide the theoretical basis and technical support which is conducive to the practical application of the straight-through labyrinth seal in HSS.

A new design structure is proposed to improve the bearing capacity and economic benefit of HSSs.

A straight-through labyrinth seal is applied to the oil sealing belt and the three-control-volume governing equation is established.

Under the influence of loading, manufacturing, installation and other factors, the axis of sleeve bearing and journal will not be aligned, which will have a great impact on running stability and life of bearing. The existence of oil groove can effectively improve the life of sleeve bearing and working efficiency. The lubrication performance of two and three grooves sleeve bearing considering journal misalignment is analyzed.

To solve the difference of discontinuous position of oil film thickness, it is necessary to use the flow balance relationship in the finite control space, and oil film thickness equation of multi-groove sleeve bearing considering journal misalignment is gained.

The friction and bearing capacity of journal bearing with oil groove increase with the increase of journal inclination angle. At the same journal inclination angle, the bearing capacity of two-axial groove journal bearing is larger than that of three-axial groove journal bearing, but the friction of two-axial groove journal bearing shows the trend of the first bigger and then smaller than that of three-axial groove journal bearing.

The research has great significance to optimize bearing lubrication performance and increase bearing working life.

The purpose of this paper is to investigate the friction and sealing characteristics of narrow end face seal ring with spiral grooves for wet clutch by experiment.

The shallow spiral grooves are machined in the end face of narrow seal ring by laser, and all of other parameters of specimens are the same with the actual production. The investigation of friction and sealing characteristics are carried out by comparing the experiment results of end face seal ring with spiral grooves with the conventional seal ring without spiral grooves through friction coefficient test, volume leakage rate test and pv value test.

Comparing with conventional seal ring without spiral grooves, seal ring with spiral grooves experiences boundary lubrication, mixed lubrication and fluid film lubrication with the increase of rotation speed, whereas the conventional seal ring only experiences mixed lubrication. Besides this, the volume leakage rate is slightly larger, but the pv value is much larger than that of conventional seal ring.

Effect of spiral grooves on the friction and sealing characteristics of narrow end face seal ring for wet clutch is investigated. The improved lubrication performance can be achieved by shallow spiral grooves even if the distance of radius difference used to machine grooves is very small.