Search results

Occupational safety issues among employees remains a contemporary and omnipresent concern. In developing countries, safety-related problems are amplified, resulting in higher incidences of serious accidents and occupational diseases. This study aims to evaluate employees’ knowledge and attitudes toward occupational health and safety, and how these influence overall occupational health and safety compliance. Ghana’s oil and gas industry provides the contextual backdrop for this research, given it is characterized by high rates of injury.

A positivist and deductive research strategy was used to quantitatively analyze both primary and secondary data sources. A structured survey was administered to industry employees, and multiple linear regression was used to establish the effects of employee’s knowledge and attitude toward occupational health hazards on overall health and safety compliance.

The findings indicate that most employees had both a high level of knowledge and positive attitude toward mitigating occupational health hazards. Moreover, the study reveals that most employees complied with occupational health safety practices. However, the study also reveals that the effect of employees’ knowledge and attitude toward occupational health hazards does not translate into deployment of comprehensive safety practices. Interestingly, female employees were found to be more knowledgeable and compliant with occupational health and safety practices than their male counterparts.

Premised upon the findings, the study recommends: implementation of relevant education and training programs encompassing the proper usage of machinery and equipment, tailored hazard safety training appropriate to specific employee job requirements, effective dissemination of risk information and governance initiatives that enforce strict adherence to correct safety procedures.

The study uniquely examines the influence of employee’s knowledge of health and safety to overall compliance within the oil and gas industry. Cumulatively, the study’s findings and recommendations contribute to improving the occupational health and safety outcomes within the industry.

Mental health problems are a grave concern in construction. Although the distinction between high job demands and low job resources, as reflected in the Job Demands-Resources (JD–R) model, has been used to examine the extent to which psychosocial hazards influence mental health for construction practitioners, limited research has reflected on the nature of these psychosocial hazards by exploring experiences of site-based construction practitioners.

This study adopted a phenomenological approach to examine people’ experiences and thoughts of the complex phenomena of psychosocial hazards and mental health in construction. In total, 33 semi-structured interviews were undertaken with site-based construction practitioners in Australia to unveil construction-focused psychosocial hazards and their effects on mental health. The data were analysed via content analysis, employing an interpretation-focused coding strategy to code text and an individual-based sorting strategy to cluster codes.

Eighteen psychosocial hazards were identified based on the JD–R model. Six of these represented a new contribution, describing salient characteristics inherent to the construction context (i.e. safety concerns, exposure to traumatic events, job insecurity, task interdependency, client demand and contract pressure). Of particular importance, a number of interrelationships among psychosocial hazards emerged.

The significance of this qualitative research lies in elucidating psychosocial hazards and their complex interrelatedness in the context of the mental health of construction practitioners, enriching the understanding of this central health and safety issue in the high-risk setting of construction work. The findings contribute to addressing mental health issues in the Australian construction industry by identifying higher order control measures, thereby creating a mentally healthy workplace.

The occupational health risk associated with the production of prefabricated concrete components is often overlooked. This paper will use a damage assessment and cyclic mitigation (DACM) model to provide individualized exposure risk assessment and corresponding mitigation management measures for workers who are being exposed.

The DACM model is proposed based on the concept of life cycle assessment (LCA). The model uses Monte-Carlo simulation for uncertainty risk assessment, followed by quantitative damage assessment using disability-adjusted life year (DALY). Lastly, sensitivity analysis is used to identify the parameters with the greatest impact on health risks.

The results show that the dust concentration is centered around the mean, and the fitting results are close to normal distribution, so the mean value can be used to carry out the calculation of risk. However, calculations using the DACM model revealed that there are still some work areas at risk. DALY damage is most severe in concrete production area. Meanwhile, the inhalation rate (IR), exposure duration (ED), exposure frequency (EF) and average exposure time (AT) showed greater impacts based on the sensitivity analysis.

Based on the comparison, the DACM model can determine that the potential occupational health risk of prefabricated concrete component (PC) factory and the risk is less than that of on-site construction. It synthesizes field research and simulation to form the entire assessment process into a case-base system with the depth of the cycle, which allows the model to be continuously adjusted to reduce the occupational health damage caused by production pollution exposure.

The shipbreaking sector in Bangladesh has spurred extensive academic and policy debates on relations between shipbreaking industries, environmental degradation and the health security of their workers. As shipbreaking is an economically significant industry in Bangladesh, it needs to implement both domestic and global mechanisms for environmental conservation and the protection of the labourers’ health from environmental risks. The purpose of this paper is to primarily explore the environmental and health security issues in shipbreaking activities in Bangladesh. It also identifies the challenges in implementing the rules and regulations for protecting the health of the workers at shipbreaking yards in Bangladesh and preserving the marine environment.

This is a qualitative paper based on secondary materials, including journal articles, books and national and international reports. It critically reviews the existing literature, rules, regulations and policing on shipbreaking with a particular focus on the environment and health security of the workers.

This paper finds that the implementation of the rules and regulations in shipbreaking in Bangladesh is complicated because of weak implementation mechanisms, political and economic interests of the yard owners, lack of coordination among different agencies, lack of adequate training and awareness among the workers and workers’ poor economic condition, which contribute to the degradation of marine and local environments and trigger health hazards among the workers. Therefore, degrading the environment and undermining occupational health and safety regulations have become regular; thus, accidental death and injury to the workers are common in this sector.

This paper is an important study on the issues of workers' health and safety and environmental hazards in the shipyard. It reports how the health security of the workers in shipbreaking yards in Bangladesh is vulnerable, and environmental rules are challenged. Finally, this paper frames some policy implications to safeguard the workers’ health rights and the marine environment.

The purpose of this study is to explore the determinants of needle stick injuries (NSIs) suffering in terms of occupational health and safety (OHS) coverage critically for health-care workers’ rights in Pakistan.

This is a qualitative study involving the designing of a questionnaire followed by the World Health Organization’s NSI prevention assessment tool and nationally published reports covering health-care workers’ OHS rights protection. A total of 17 public and private hospitals were surveyed with a two-stage sampling method. Descriptive and inferential statistics (one-way analysis of variance with multiple comparison tests) were applied and significant results were discussed (p = 0.05 & p = 0.01). The results were discussed critically in the context of the OHS rights of health-care workers.

Analysis revealed the following significant relationships: job type and safety behavior; age group of health-care workers and safety management; injection usage per day and safety behavior; past year’s needle sticks injuries cases with safety behavior and occupational exposure; work shift and work experience with safety knowledge, safety awareness and work experience with safety management. It was also found there is no specific OHS law in the country for health-care workers.

This study is limited in terms of sampling size and quantification of NSI burden among health-care workers.

Improved OHS management practices among health-care workers can control NSIs that ultimately ensure their workplace OHS rights. Health-care workers need OHS coverage in terms of awareness about potential workplace hazards and job training accordingly. Findings from extensive studies of a similar kind can give useful policy directions for workplace health management in health-care setup at the national level.

This study highlights the importance of OHS coverage for health-care workers in hospitals. It reports different determinants of NSIs suffering causing health-care worker’s rights violations at the workplace in Pakistan.

The extant literature underlines the inadequacies of legal and policy frameworks addressing the safety and health concerns of sandstone mineworkers in India. Notably, Rajasthan, a state renowned for its extractive industries, mirrors these concerns. Against this backdrop, this paper aims to critically evaluate the relevant legal and policy landscape, with an emphasis on the recent central statute: the Occupational Safety, Health and Working Conditions Code of 2020 (OSHWCC). Given that the Code subsumes the key legislation pertaining to the safety and health of mineworkers, an in-depth critical analysis is essential to forge suitable policy interventions to address continued gross violations of human rights.

The critical analysis of legal and policy frameworks on silicosis in sandstone mineworkers is based on a comprehensive reading of existing literature. The literature includes relevant laws, case law, reports of the Rajasthan State Human Rights Commission and National Human Rights Commission, publicly available data and key scholarly contributions in the field.

Although the OSHWCC has made some changes to the existing regulatory architecture of mines in India, it has failed to safeguard the safety and health of mineworkers. Notably, the vast majority of mines in India – constituting approximately 90%, which are informal, seasonal and small-scale – remain beyond the jurisdiction of this Code. In Rajasthan, there are specific policies on silicosis, but these policies are poorly implemented. There is a serious shortage of doctors to diagnose silicosis cases, leading to under-diagnosis. The compensation for silicosis victims is insufficient; the distribution mechanism is complex and often delayed.

The central and many state governments have not established the regulatory institutions envisaged under the OSHWCC 2020; therefore, the working of the regulatory institutions could not be critically examined.

The paper critically evaluates laws and policies pertaining to silicosis in sandstone mineworkers, with a special emphasis on the state of Rajasthan. It offers a comprehensive critique of the OSHWCC of 2020, which has not received much attention from previous studies.

Safety training can effectively facilitate workers’ safety awareness and prevent injuries and fatalities on construction sites. Traditional training methods are time-consuming, low participation, and less interaction, which is not suitable for students who are born in Generation Z (Gen Z) and expect to be positively engaged in the learning process. With the characteristic of immersive, interaction, and imagination, virtual reality (VR) has become a promising training method. The purpose of this study is to explore Gen Z students’ learning differences under VR and traditional conditions and determine whether VR technology is more suitable for Gen Z students.

This paper designed a comparison experiment that includes three training conditions: VR-based, classroom lecturing, and on-site practice. 32 sophomore students were divided into four groups and received different training methods. The eye movement data and hazard-identification index (HII) scores from four groups were collected to measure their hazard-identification ability. The differences between the participants before and after the test were tested by paired sample t-test, and the differences between the groups after the test were analyzed by one-way Welch’s analysis of variance (ANOVA) test.

The statistical findings showed that participants under VR technology condition spent less time finding and arriving at the Areas of Interest (AOIs). Both the eye movement data and HII scores indicated that VR-based safety training is an alternative approach for Gen Z students to traditional safety training methods.

These findings contribute to the theoretical implications by proving the applicability of VR technology to Gen Z students and empirical implications by guiding colleges and universities to design attractive safety training lessons.

Construction is a risky industry. Therefore, organizations are seeking ways towards improving their safety performance. Among these, the integration of technology into health and safety leads to enhanced safety performance. Considering the benefits observed in using technology in safety, this study aims to explore digital technologies' use and potential benefits in construction health and safety.

An extensive bibliometrics analysis was conducted to reveal which technologies are at the forefront of others and how these technologies are used in safety operations. The study used two different databases, Web of Science (WoS) and Scopus, to scan the literature in a systemic way.

The systemic analysis of several studies showed that the digital technologies use in construction are still a niche theme and need more assessment. The study provided that sensors and wireless technology are of utmost importance in terms of construction safety. Moreover, the study revealed that artificial intelligence, machine learning, building information modeling (BIM), sensors and wireless technologies are trending technologies compared to unmanned aerial vehicles, serious games and the Internet of things. On the other hand, the study provided that the technologies are even more effective with integrated use like in the case of BIM and sensors or unmanned aerial vehicles. It was observed that the use of these technologies varies with respect to studies conducted in different countries. The study further revealed that the studies conducted on this topic are mostly published in some selected journals and international collaboration efforts in terms of researching the topic have been observed.

This study provides an extensive analysis of WoS and Scopus databases and an in-depth review of the use of digital technologies in construction safety. The review consists of the most recent studies showing the benefits of using such technologies and showing the usage on a systemic level from which both scientists and practitioners can benefit to devise new strategies in technology usage.

Effective safety supervision plays a crucial role in ensuring safe production within coal mines. Conventional coal mine safety supervision (CMSS) in China has suffered from the problems of power-seeking, excessive resource consumption and poor timeliness. This paper aims to explore the Internet+ CMSS mode being emerged in China.

The evolution of CMSS systems underwent comprehensive scrutiny through a blend of qualitative and quantitative approaches. First, evolutionary game theory was used to analyze the necessity of incorporating Internet+ technology. Second, a system dynamics model of Internet+ CMSS was crafted, encompassing a system flow diagram and equations for various variables. The model was subsequently simulated by taking the W coal mine in Shanxi Province as a representative case study.

It was revealed that the expected safety profit from the Internet+ mode is 296.03% more than that from the conventional mode. The precise dissemination of law enforcement information was identified as a pivotal approach through which the Internet+ platform served as a conduit to foster synergistic collaboration among diverse elements within the system.

The outcomes of this study not only raise awareness about the potential of Internet+ technology in safety supervision but also establish a vital theoretical foundation for enhancing the efficacy of the Internet+ CMSS mode. The significance of these findings extends to fostering the wholesome and sustainable progress of the coal mining industry.

This research stands out as one of the limited studies that delve into the influence of Internet+ technology on CMSS. Building upon the pivotal approach identified, to the best of authors’ knowledge, a novel “multi-blind” working mechanism for Internet+ CMSS is introduced for the first time.

Construction organizations must maintain a productive workforce without sacrificing their health and safety. The global construction sector loses billions of dollars yearly to poor health and safety practices. This study aims to investigate benefits derivable from using wearable technologies to improve construction health and safety. The study also reports the challenges associated with adopting wearable technologies.

The study adopted a quantitative design, administering close-ended questions to professionals in the Nigerian construction industry. The research data were analysed using descriptive and inferential statistics.

The study found that the critical areas construction organizations can benefit from using WSDs include slips and trips, sensing environmental concerns, collision avoidance, falling from a high level and electrocution. However, key barriers preventing the organizations from adopting wearable technologies are related to cost, technology and human factors.

The time and cost lost to H&S incidents in the Nigerian construction sector can be reduced by implementing the report of this study.

Studies on WSDs have continued to increase in developed countries, but Nigeria is yet to experience a leap in the research area. This study provides insights into the Nigerian reality to provide directions for practice and theory.