Search results

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

Relationships have been investigated between subjective pressure sensation and objective pressure measured, for knit garments of different sizes and fabrics with different extensibilities. Fechner's logarithmic law is used to investigate the relations. Equations are obtained for describing the Psychophysical mechanism of clothing pressure perception under certain conditions. Objective pressure measuring had high predictive power with regard to subjective pressure sensation only under those conditions. Wearing pressure comfort has a negative correlation with feelings of fetter, scratchy, heavy and pressure, and has a poor correlation with feelings of softness and smoothness. Using factor analysis with principal factor solutions and rotated by the Varimax method, we obtained factor matrices.

For comfort evaluation of underwear pressure, this paper proposes an improved GA algorithm to optimize the weight and threshold of BP neural network, namely PSO-GA-BP neural network prediction model.

The objective parameters of underwear, body shape data, skin deformation and other data are selected for simulation experiments to predict the objective pressure and subjective evaluation in dynamic and static state. Compared with the prediction results of BP neural network prediction model, GA-BP neural network prediction model and PSO-BP neural network prediction model, the performance of each prediction model is verified.

The results show that the BP neural network model optimized by PSO-GA algorithm can accelerate the convergence speed of the neural network and improve the prediction accuracy of underwear pressure.

PSO-GA-BP model provides data support for underwear design, production and processing and has guiding significance for consumers to choose underwear.

Zoning design of pressure comfort of women's shaping pants is studied in this paper based on the new material made by the LRJ40/1F warp-knitting machine.

According to the distribution of body fat and the pressure comfort range of the shaping pants, zoning design is carried out. The pressure comfort of the women's shaping pants is tested by the objective pressure test and the subjective evaluation method.

The result is that using the method of zoning design can satisfy the comfort of the lower limbs while improving the mobility and plasticity.

Pressure comfort has become an important index to evaluate the comfort of elastic shaping pants. However, there were very few studies on the relationship between the pressure comfort of warp-knitted elastic pants and the design of jacquard organization in China and abroad.

Assessing the impacts generated by tourism has become an essential element for the industry’s sustainability. The increasing intensity of the impacts and the need to evaluate them from a resident’s perspective calls for new approaches to assist tourism management. This paper aims to advance from the pressure-state-response framework (PSR) to measure the tourism impacts in urban destinations with a holistic model called PSR-ti.

A multiple linear regression method was adopted to apply the PSR-ti model in the city of Madrid, estimating the relationship between the pressure (objective) and state (subjective) variables. Local statistical yearbook data was used to construct the pressure variables. Regarding the state variables, a survey was designed to assess residents’ perceptions of tourism. A total of 652 responses were obtained.

The results obtained from the study of pressure indicators unveil that these indicators can support decision-making processes as an underused management tool. This work represents a step forward in considering the transversality of tourism concerning urban planning, the development of equipment and infrastructures or activities such as commerce and culture for the analysis of the state indicators; the results obtained determine the need to periodically evaluate the perception of residents on the impacts of tourism, given its crucial role in the sustainability of the destination.

The PSR-ti model offers a holistic vision, including objective and subjective indicators in the model, which enhances the appraisal of the impacts of tourism by identifying pressure and state factors as a starting point for possible responses by the decision makers of the tourist destination.

Graduated compression shaping pants (GCSPs) are shapewears sharing the same action mechanisms as medical compression stockings (MCSs), setting four stages of pressure on lower limbs that gradually decreasing from the ankle to the thigh root. They are claimed to be able to not only shaping bodies but also promoting blood circulation in legs. However, there are few studies on whether GCSPs perform the advertised functions and how effective GCSPs could be. The purpose of this paper is to explore and evaluate the pressure distribution and body-shaping effectivity of GCSPs.

The authors first select two graduated compression shaping pants (GCSPs-A, GCSPs-B) and a pair of professional shaping pants as the Controls. Then objective pressure test and 3D body scanning test are conducted. Finally, the pressure distribution and body-shaping effectivity are demonstrated by ORIGIN and MATLAB, compared with controls.

GCSPs-A perform significant body-shaping effectivity at the calf, thigh and thigh root, which are less effective than the Controls. The body-shaping effectivity of GCSPs-B is predicted weaker than GCSPs-A at the calf and thigh, while better at the thigh root. Both GCSPs-A and GCSPs-B show gradual pressure, which could be classified into Class I or II of MCSs. Comprehensively, GCSPs-A are superior than GCSPs-B.

In this paper, authors evaluate the pressure distribution and body-shaping effectivity of GCSPs, which could provide guidance for enterprises to further optimize and produce GCSPs, performing better functions that meet consumers' needs better.

This study explores the phenomenon of compassionate leadership, a promising concept in management literature. Despite significant contributions towards the understanding of its antecedents and consequences, the specific role of compassion concerning the leader behavior under extreme pressure remains unexplored.

Drawing empirically on the case of three banks under three different logics, the authors trace how heads of banking branches, namely, middle managers, deal with the paradoxical phenomenon of integrating their human nature with the coetaneous need to achieve aggressive objectives. The authors analyzed interviews using the interpretive research method (Hatch and Yanow, 2003).

The authors identified that the logic of savings banks and credit cooperatives, together with specific human elements, created a healthier environment to develop compassionate behaviors compared to commercial banks. The authors found coherence when linking the institutional message of putting the spotlight on a personalized treatment of customers, and the middle manager compassionate actions towards customers and subordinates.

Suggestions for future theorizing and research are advanced, along with constructive practical implications to rehumanize the dark side of banking for both employees and customers.

The findings provided in this paper are original because they provide further evidence of linking business logics with compassionate leadership of middle managers and its impact on employees and customers.

The purpose of this paper is to advance enviropreneurial orientation (EO) as a new internal driver for green supply chain practice adoption. Because manufacturing supply chains are major contributors to environmental pollution, green practice adoption is a means of reducing environmental pollution. However, why owner/managers adopt green practices remains uncertain. The concept of EO is a potential and important motivation for adoption of green supply chain practices that has yet to be explored. The study investigates the relationship between EO and green supply chain practice adoption.

Cross-sectional survey design was employed to collect data from owners/managers of SME manufacturing firms in Uganda. The structural equation modelling was used to analyse results on the influence of each of nine EO on green supply chain practice adoption and the influence of EO dimensions on green supply chain practice adoption.

Findings show that EO positively influences green supply chain practice adoption. All but two of nine dimensions of EO were significant predictors of green supply chain practice adoption. Competitive aggressiveness and perceived pressure from environmental regulations were not significant predictors for green supply chain practice adoption.

The study was cross-sectional. A longitudinal survey was more appropriate because of the presence of a behavioural variable green supply chain practice adoption. Further a comparative study is required because of the existence of differences in classifications of SMEs in both the developing and developed countries.

The research contributes to further scholarly understanding of green practice adoption in SMEs through offering a new construct, EO, and its role in influencing green supply chain practice adoption. The authors develop EO as a construct, a concept that has not been developed for more than two decades.

Examines the thirteenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The purpose of this paper is to clarify the relationship between dynamic clothing pressure of women's sports bras and heart rate variation indexes during playing basketball.

Totally, 35 healthy females aged between 20 and 24 were employed as subjects. Their heart rate variability (HRV) data and the clothing pressure values when wearing sports bras of different bust sizes during playing basketball were measured using Polar RS800CX heart rate monitor and Flexi Force201 thin film type pressure sensor with MFF series pressure test system. Their subjective comfort evaluations were conducted by five-point Likert scale. Grey correlation analysis is used to determine the correlation degree of heart rate variation indexes and subjective comfort evaluations to identify the indexes preferably associated with subjective comfort. Multiple regression analysis is applied to investigate multiple correlations between pressure of test points and the indexes selected above.

Combined subjective comfort evaluation with objective HRV evaluation the heart rate variation indexes preferably associated with subjective comfort of these bras were identified, which includes mHR, mRR, RMSSD, pNN50. By the relationship between dynamic clothing pressure and the indexes above, this study finds that the clothing pressure of the chest area during basketball exercise should be controlled in the range of 2.01-4.74 kPa.

The subjects of different body type should be taken into account. Further, the mathematic models from this study show low R2-value so the models should be provided more reliable prediction.

The present study indicates that there is an inevitable connection between heart rate variation indexes and subjective comfort of basketball sports bras and creatively points out that heart rate variation indexes can partly assess the comfortable clothing pressure. The study can offer theoretical basis for sports apparel industry to develop the comfortable basketball sports bra.