Search results

The primary objective of this investigation is to optimize the constricted arc tungsten inert gas (CA-TIG) welding parameters specifically welding current (WC), arc constriction current (ACC), ACC frequency (ACCF) and CA traverse speed to maximize the tensile properties of thin Inconel 718 sheets (2 mm thick) using a statistical technique of response surface methodology and desirability function for gas turbine engine applications.

The four factor – five level central composite design (4 × 5 – CCD) matrix pertaining to the minimum number of experiments was chosen in this investigation for designing the experimental matrix. The techniques of numerical and graphical optimization were used to find the optimal conditions of CA-TIG welding parameters.

The thin sheets of Inconel 718 (2 mm thick) can be welded successfully using CA-TIG welding process without any defects. The joints welded using optimized conditions of CA-TIG welding parameters showed maximum of 99.20%, 94.45% and 73.5% of base metal tensile strength, yield strength and elongation.

The joints made using optimized CA-TIG welding parameters disclosed 99.20% joint efficiency which is comparatively 20%–30% superior than conventional TIG welding process and comparable to costly electron beam welding and laser beam welding processes. The parametric mathematical equations were designed to predict the tensile properties of Inconel 718 joints accurately with a confidence level of 95% and less than 4.5% error. The mathematical relationships were also developed to predict the tensile properties of joints from the grain size (secondary dendritic arm spacing-SDAS) of fusion zone microstructure.

Presents a review on implementing finite element methods on supercomputers, workstations and PCs and gives main trends in hardware and software developments. An appendix included at the end of the paper presents a bibliography on the subjects retrospectively to 1985 and approximately 1,100 references are listed.

The optimal thickness distribution of a two‐span continuous beam is determined with the objectives of minimizing the maximum stress, maximizing the fundamental frequency and frequency separation between adjacent frequencies. The self‐weight of the beam is included in the computations. The multiobjective design problem is solved by using the concept of Pareto optimality. The beam thickness is approximated by constant splines. The stress distribution and the frequencies are determined by the finite element method. The optimization of the beam is carried out by the feasible direction method and by employing a quadratic approximation of the thickness function. Numerical results are given for two‐objective design problems. Optimal trade‐off curves, thickness distributions and stress distributions of optimally designed beams are presented in graphical form. The effects of self‐weight and different design objectives on the thickness distribution are investigated.

A cross-platform paradigm (computing model), which combines the graphical user interface of MATLAB and parallel Fortran programming, for fluid-film lubrication analysis is proposed. The purpose of this paper is to take the advantages of effective multithreaded computing of OpenMP and MATLAB’s user-friendly interface and real-time display capability.

A validation of computing performance of MATLAB and Fortran coding for solving two simple sliders by iterative solution methods is conducted. The online display of the particles’ search process is incorporated in the MATLAB coding, and the execution of the air foil bearing optimum design is conducted by using OpenMP multithreaded computing in the background. The optimization analysis is conducted by particle swarm optimization method for an air foil bearing design.

It is found that the MATLAB programs require prolonged execution times than those by using Fortran computing in iterative methods. The execution time of the air foil bearing optimum design is significantly minimized by using the OpenMP computing. As a result, the cross-platform paradigm can provide a useful graphical user interface. And very little code rewritting of the original numerical models is required, which is usually optimized for either serial or parallel computing.

Iterative methods are commonly applied in fluid-film lubrication analyses. In this study, iterative methods are used as the solution methods, which may not be an effective way to compute in the MATLAB’s setting.

In this study, a cross-platform paradigm consisting of a standalone MATLAB and Fortran codes is proposed. The approach combines the best of the two paradigms and each coding can be modified or maintained independently for different applications.

This study aims to at numerically retrieve five constant dimensional thermo-physical properties of a biological tissue from dimensionless boundary temperature measurements.

The thermal-wave model of bio-heat transfer is used as an appropriate model because of its realism in situations in which the heat flux is extremely high or low and imposed over a short duration of time. For the numerical discretization, an unconditionally stable finite difference scheme used as a direct solver is developed. The sensitivity coefficients of the dimensionless boundary temperature measurements with respect to five constant dimensionless parameters appearing in a non-dimensionalised version of the governing hyperbolic model are computed. The retrieval of those dimensionless parameters, from both exact and noisy measurements, is successfully achieved by using a minimization procedure based on the MATLAB optimization toolbox routine lsqnonlin. The values of the five-dimensional parameters are recovered by inverting a nonlinear system of algebraic equations connecting those parameters to the dimensionless parameters whose values have already been recovered.

Accurate and stable numerical solutions for the unknown thermo-physical properties of a biological tissue from dimensionless boundary temperature measurements are obtained using the proposed numerical procedure.

The current investigation is limited to the retrieval of constant physical properties, but future work will investigate the reconstruction of the space-dependent blood perfusion coefficient.

As noise inherently present in practical measurements is inverted, the paper is of practical significance and models a real-world situation.

The findings of the present paper are of considerable significance and interest to practitioners in the biomedical engineering and medical physics sectors.

In comparison to Alkhwaji et al. (2012), the novelty and contribution of this work are as follows: considering the more general and realistic thermal-wave model of bio-heat transfer, accounting for a relaxation time; allowing for the tissue to have a finite size; and reconstructing five thermally significant dimensional parameters.

This paper gives a bibliographical review of the finite element and boundary element parallel processing techniques from the theoretical and application points of view. Topics include: theory – domain decomposition/partitioning, load balancing, parallel solvers/algorithms, parallel mesh generation, adaptive methods, and visualization/graphics; applications – structural mechanics problems, dynamic problems, material/geometrical non‐linear problems, contact problems, fracture mechanics, field problems, coupled problems, sensitivity and optimization, and other problems; hardware and software environments – hardware environments, programming techniques, and software development and presentations. The bibliography at the end of this paper contains 850 references to papers, conference proceedings and theses/dissertations dealing with presented subjects that were published between 1996 and 2002.

Introduces papers from this area of expertise from the ISEF 1999 Proceedings. States the goal herein is one of identifying devices or systems able to provide prescribed performance. Notes that 18 papers from the Symposium are grouped in the area of automated optimal design. Describes the main challenges that condition computational electromagnetism’s future development. Concludes by itemizing the range of applications from small activators to optimization of induction heating systems in this third chapter.

This paper aims to present an integrated optimisation‐modelling computational approach for virtual prototyping that helps design engineers to improve the reliability and performance of electronic components and systems through design optimisation at the early product development stage. The design methodology is used to identify the optimal design of lead‐free (Sn3.9Ag0.6Cu) solder joints in fine‐pitch copper column bumped flip‐chip electronic packages.

The design methodology is generic and comprises numerical techniques for computational modelling (finite element analysis) coupled with numerical methods for statistical analysis and optimisation. In this study, the integrated optimisation‐modelling design strategy is adopted to prototype virtually a fine‐pitch flip‐chip package at the solder interconnect level, so that the thermal fatigue reliability of the lead‐free solder joints is improved and important design rules to minimise the creep in the solder material, exposed to thermal cycling regimes, are formulated. The whole prototyping process is executed in an automated way once the initial design task is formulated and the conditions and the settings for the numerical analysis used to evaluate the flip‐chip package behaviour are specified. Different software modules that incorporate the required numerical techniques are used to identify the solution of the design optimisation problem related to solder joints reliability optimisation.

For fine‐pitch flip‐chip packages with copper column bumped die, it is found that higher solder joint volume and height of the copper column combined with lower copper column radius and solder wetting around copper column have a positive effect on the thermo‐mechanical reliability.

The findings of this research provide design rules for more reliable lead‐free solder joints for copper column bumped flip‐chip packages and help to establish further the technology as one of the viable routes for flip‐chip packaging.

This work seeks to present the theoretical study considerations and the characteristics of a general design methodology in optimal time for electronic systems using numerical methods and optimal control theory. Through this, the design problem of a system is formulated in terms of optimal control in minimal time.

This general design methodology includes the traditional design strategy (TDS), and the modified traditional design strategy (MTDS), where the model of the system is part of the optimization procedure but an objective function of the optimization process is constructed such as includes the traditional objective function and some penalty functions that feign the model of the system. Many special control functions are introduced artificially to generalize the methodology and produce several design trajectories for the same optimization process – the first and final trajectories correspond to TDS and MTDS, respectively. The combination of these trajectories produce an infinite number of design strategies, some of these are quasi‐optimal in time and only one is optimal in time.

Qualitative and numeric results of this iterative process are generated in a personal computer in a C++ language elaborated with a visual C++ graphic user interface. An algorithm is constructed to form an optimal in time design strategy switching from a MTDS subset to a TDS subset. Results of measured times are analyzed, showing that there is a control input U, such that the objective function is minimized in a minimum time.

These ideas are proposed using method of gradient optimization and special acceleration effect.

This paper aims to propose a process optimization approach showing how organizations are able to achieve sustainable and efficient process optimization, based on integrated process-risk analysis using several criteria to a better decision-making.

Several approaches are used (functional/dysfunctional) to analyze how processes work and how to deal with risks forming multi-criteria decision-making. In addition, a risk factor is integrated into the structured analysis and design techniques (SADT) method forming a novel graphical view SADT-RISK; it identifies process’s failures using the traditional failure modes, effects and criticality analysis (FMECA) and economic consideration “failure mode and effect, criticality analysis-cost FMECA-C” making a multi-criterion matrix for better decision-making. Subsequently, some recommendations are proposed to overcome the failure.

This paper illustrates a methodology with a case study in a company, which has a leading brand in the market in Algeria. The authors are integrating a varied portfolio of approaches linking with each other to analyze, improve and optimize the processes in terms of reliability and safety to deal with risks; reduce the complexity of the systems; increase the performance; and achieve a safer process. However, the proposed method can be readily used in practice.

The paper provides a new approach based on integrated management using new elements as an innovative contribution, forming a novel graphical view SADT-RISK; it identifies process’s failures using the traditional FMECA and economic consideration “a new multi-criterion matrix for better decision-making and using the SWOT analysis – Strengths, Weaknesses, Opportunities, Threats – as a balance to decide about the process improvement”. The authors conclude that this methodology is oriented and applicable to different types of companies such as financial, health and industrial as illustrated by this case study.