Search results

In high voltage direct current cable systems, cable joints are known as the least reliable components due to the use of multiple dielectrics. Resulting from the electric field and temperature depending conductivity of the different dielectrics, field enhancement at critical areas, e.g. triple points, may result in accelerated aging and the failure of the component. To reduce the stress, different field grading techniques are applied. The purpose of this study is to investigate different grading techniques for cable joints. Different shapes of the electrode and a varying nonlinear conductivity of field grading materials (FGM) are used for the simulation of the electric field.

Coupled electro-thermal field simulations are applied for different joint geometries, to obtain the stationary electric field. Electric field simulations in cable joint using geometric and nonlinear field grading techniques are shown.

Using the geometric field grading, the shape of the stress cone determines the field values in critical areas (triple points). High stress reduction is obtained for a certain curvature of the stress cone. For the nonlinear stress control, materials with a higher conductivity in comparison to the cable and the joint material are used. A field reduction is obtained by increasing the total conductivity. On the other hand, this is also increasing the insulation losses within the total FGM. More applicable is the decrease of the switching field or the increase of nonlinearity, which is only locally increase the conductivity and the insulation losses. Furthermore, simulations results show that an approximately constant field reduction is obtained, if the nonlinearity is above a certain threshold.

This study is restricted to a field dependency of FGM only. For impulse voltages, high temperature and electric conductivity values my result in a thermal runaway. Furthermore, only direct current field grading techniques are studied.

The field grading of cable joints, using geometric and nonlinear techniques, is analyzed. A comparison between the electric field, by varying the curvature of the ground stress cone or the FGM conductivity constants in a complex joint geometry is novel. With its effect on the electric fields, general requirements for the geometry (geometric field grading) or the values of the FGM constants (nonlinear field grading) are defined to obtain a sufficient field grading.

The purpose of this paper is to present the freely available finite element simulation software Pyrit.

In a first step, the design principles and the objective of the software project are defined. Then, the software’s structure is established: The software is organized in packages for which an overview is given. The structure is based on the typical steps of a simulation workflow, i.e., problem definition, problem-solving and post-processing. State-of-the-art software engineering principles are applied to ensure a high code quality at all times. Finally, the modeling and simulation workflow of Pyrit is demonstrated by three examples.

Pyrit is a field simulation software based on the finite element method written in Python to solve coupled systems of partial differential equations. It is designed as a modular software that is easily modifiable and extendable. The framework can, therefore, be adapted to various activities, i.e., research, education and industry collaboration.

The focus of Pyrit are static and quasistatic electromagnetic problems as well as (coupled) heat conduction problems. It allows for both time domain and frequency domain simulations.

In research, problem-specific modifications and direct access to the source code of simulation tools are essential. With Pyrit, the authors present a computationally efficient and platform-independent simulation software for various electromagnetic and thermal field problems.

The purpose of this paper is to analyze the accuracy of finite element method simulations for high voltage equipment featuring resistive field grading.

In such simulations, the order of the mesh used and the polynomial order of the ansatz functions are varied while maintaining mesh and simulation parameters. The resulting accuracy of the simulations is analyzed by an error convergence study which shows the relative errors against the number of degrees of freedom the computational time and the memory consumption.

Simulation results of simplified benchmark geometry and applications to large‐scale 3D high voltage equipment are presented herein.

The impact of the order of the mesh and the Ansatz functions are studied for realistic high voltage setups. The paper helps the user of simulation software to choose adequate simulation parameters.

Gas insulated systems, such as gas insulated lines (GIL), use insulating gas, mostly sulfur hexalfluoride (SF₆), to enable a higher dielectric strength compared to e.g. air. However, under high voltage direct current conditions, charge accumulation and electric field stress may occur, which may lead to partial discharge or system failure. Therefore, numerical simulations are used to design the system and determine the electric field and charge distribution. Although the gas conduction shows a more complex current–voltage characteristic compared to solid insulation, the electric conductivity of the SF₆ gas is set as constant in most works. The purpose of this study is to investigate different approaches to address the conduction in the gas properly for numerical simulations.

In this work, two approaches are investigated to address the conduction in the insulating gas and are compared to each other. One method is an ion-drift-diffusion model, where the conduction in the gas is described by the ion motion in the SF₆ gas. However, this method is computationally expensive. Alternatively, a less complex approach is an electro-thermal model with the application of an electric conductivity model for the SF₆ gas. Measurements show that the electric conductivity in the SF₆ gas has a nonlinear dependency on temperature, electric field and gas pressure. From these measurements, an electric conductivity model was developed. Both methods are compared by simulation results, where different parameters and conditions are considered, to investigate the potential of the electric conductivity model as a computationally less expensive alternative.

The simulation results of both simulation approaches show similar results, proving the electric conductivity for the SF₆ gas as a valid alternative. Using the electro-thermal model approach with the application of the electric conductivity model enables a solution time up to six times faster compared to the ion-drift-diffusion model. The application of the model allows to examine the influence of different parameters such as temperature and gas pressure on the electric field distribution in the GIL, whereas the ion-drift-diffusion model enables to investigate the distribution of homo- and heteropolar charges in the insulation gas.

This work presents numerical simulation models for high voltage direct current GIL, where the conduction in the SF₆ gas is described more precisely compared to a definition of a constant electric conductivity value for the insulation gas. The electric conductivity model for the SF₆ gas allows for consideration of the current–voltage characteristics of the gas, is computationally less expensive compared to an ion-drift diffusion model and needs considerably less solution time.

This paper aims to develop an automated domain decomposition strategy that is based on the presence of nonlinear field grading material, in the context of model order reduction for transient strongly nonlinear electro-quasistatic (EQS) field problems.

The paper provides convincing empirical insights to support the proposed domain decomposition algorithm, a numerical investigation of the performance of the algorithm for different snapshots and model order reduction experiments.

The proposed method successfully decomposes the computational domain, while the resulting reduced models are highly accurate. Further, the algorithm is computationally efficient and robust, while it can be embedded in black-box model reduction implementations.

This paper fulfills the demand to effectively perform model order reduction for transient strongly nonlinear EQS field problems.

The purpose of this paper is to examine the electro-magnetohydrodynamic behavior of a third-grade non-Newtonian fluid, flowing between a pair of parallel plates in the presence of electric and magnetic fields. The flow medium between the plates is porous. The effects of Joule heating and viscous energy dissipation are studied in the present study.

A semi-analytical/numerical method, the differential transform method, is used to obtain solutions for the system of the nonlinear differential governing equations. This solution technique is efficient and may be adapted to solve a variety of nonlinear problems in simple geometries, as it was confirmed by comparisons between the results using this method and those of a fully numerical scheme.

The results of the computations show that the Darcy–Brinkman–Forchheimer parameter and the third-grade fluid model parameter retards, whereas both parameters have an inverse effect on the temperature profile because the viscous dissipation increases. The presence of the magnetic field also enhances the temperature profile between the two plates but retards the velocity profile because it generates the opposing Lorenz force. A graphical comparison with previously published results is also presented as a special case of this study.

The obtained results are new and presented for the first time in the literature.

This study aims to investigate the effect of two-dimensional Darcy-Forchheimer flow over second-grade fluid with linear stretching. Heat transfer through convective boundary conditions is taken into account.

Nonlinear coupled governing equations are tackled with a homotopy algorithm, while for numerical computation the computer software package BVPh 2.0 is used. The convergence analysis is also presented for the validation of analytical and numerical results.

Valuation for the impact of key parameters such as variable thermal conductivity, Dufour and Soret effects and variable magnetic field in an electrically conducted fluid on the velocity, concentration and temperature profiles are graphically illustrated. It is observed from the results that temperature distribution rises by Dufour number whereas concentration distribution rises by Soret number. The Forchheimer number and porosity parameter raise the skin friction coefficient. The permeable medium has a vital impact and can help in reining the rate of heat transfer.

The permeable medium has a vital impact and can help in reining the rate of heat transfer.

To the best of the authors’ knowledge, this study is reported for the first time.

The purpose of this study is to scrutinize the effects of entropy generation and nonlinear mixed convection on the boundary layer flow of second grade fluid induced by stretching sheets. Heat transfer effects are accounted in view of viscous dissipation and nonlinear thermal radiation.

Optimal homotopic asymptotic method procedure is adopted to obtain the analytical solution of nonlinear ordinary differential equations.

It has been noticed that Hartmann and Brinkman number has reverse characteristics against entropy generation and Bejan number.

To the best of the authors’ knowledge, no such analysis has been reported to date.

The purpose of this paper is to highlight the effect of combined heat and mass transfer characteristics of magnetohydrodynamic (MHD) free convection flow of an electrically conducting Newtonian fluid on circular cylinder with uniform heat/mass flux, taking into consideration the effects of uniform transverse magnetic field and thermal radiation.

An analysis is performed to study the momentum, combined heat and mass transfer characteristics of MHD free convection flow past a circular cylinder surface under the effect of thermal radiation with uniform heat and mass flux. By using Lie group method, the infinitesimal generators of governing equations are calculated. Using the resulting generators for the boundary value problem, the equations are transformed into an ordinary differential system. Numerical solutions of the outcoming non‐linear differential equations are found by using a combination of a Runge–Kutta algorithm and shooting technique.

Application of a magnetic field normal to the flow of an electrically conducting fluid gives rise to a resistive force that acts in the direction opposite to that of the flow. This resistive force tends to slow down the motion of the fluid along the cylinder and causes increases in its temperature and concentration and hence the respective changes in the wall shear stress, local Nusselt and Sherwood numbers as the magnetic parameter, respectively are changed with various values of angle which is measured in degrees from the front stagnation point on the surface. It is noted that these coefficients reduced as the magnetic parameter increases. Also, the effect of thermal radiation works as a heat source and so the quantity of heat added to the fluid increases, therefore the local Nusselt number reduced as the radiation parameter increases.

An analysis is performed to study the momentum, combined heat and mass transfer characteristics of MHD free convection flow of an electrically conducting Newtonian fluid on circular cylinder with uniform heat/mass flux with the effects of uniform transverse magnetic field and thermal radiation.

This paper provides a very useful source of coefficient of heat and mass transfer values for engineers planning to transfer heat and mass by using electrically conducting gases with uniform heat/mass flux.

The combined heat and mass transfer of an electrically conducting gases on free convection flow in the presence of magneto and thermal radiation effects are investigated and can be used by different engineers working on industry, geothermal, geophysical, technological and engineering applications.

The purpose of this paper is to study entropy generation in magneto-Jeffrey nanomaterial flow by impermeable moving boundary. Adopted nanomaterial model accounts Brownian and thermophoretic diffusions. Modeling is arranged for thermal radiation, nonlinear convection and viscous dissipation. In addition, the concept of Arrhenius activation energy associated with chemical reaction are introduced for description of mass transportation.

Homotopy algorithms are used to compute the system of ordinary differential equations.

The afore-stated analysis clearly notes that simultaneous aspects of activation energy and entropy generation are not yet investigated. Therefore, the intention here is to consider such effects to formulate and investigate the magneto-Jeffrey nanoliquid flow by impermeable moving surface.

As per the authors’ knowledge, no such work has yet been published in the literature.