Search results

The slot-entry hybrid journal bearings have been successfully used in various engineering applications because of their good performance over wide range of speed and load, besides their relative simplicity in manufacturing. Most of the research work pertaining to non-recessed journal bearing assumes standard symmetric and asymmetric configurations. However, many more configurations are possible by changing the position of slot which may improve the performance of the slot-entry journal bearing. In the present work study of static performance characteristics of slot-entry journal bearing of different configuration has been carried out. The paper aims to discuss these issues.

FEM has been used to solve the Reynolds equation governing the flow of lubricant in the bearing clearance space along with the restrictor flow equation. The non-Newtonian lubricant has been assumed to follow the cubic shear stress law. The performance characteristics of slot-entry hybrid journal bearings are computed by developing a computer program.

The simulated results of bearing characteristics parameters in terms of minimum fluid-film thickness and bearing flow have been presented for the wide range of various values of non-linearity factor and external load. It is found that there is an increase in the oil requirement for slot-entry hybrid journal bearing with the specified operating and geometric parameters, when the viscosity of the lubricant decreases due to the non-Newtonian behavior of the lubricant. The effect of the decrease in the viscosity of the lubricant due to non-Newtonian behavior of the lubricant diminishes the attitude angle. The computed performance characteristics are helpful for the bearing designer while choosing a particular configuration of bearing.

The performance characteristics have been computed by considering the non-Newtonian lubricants. The thermal effects have been ignored in the analysis so as to obviate the mathematical complexity.

Get idea from already published manuscripts.

The purpose of this paper is to describe the static performance characteristics of orifice compensated hole-entry hybrid journal bearing considering the combined influence of rise in temperature and non-Newtonian behavior of the lubricant. The required governing equations have been solved using the finite element method and a suitable iterative technique. The non-Newtonian lubricant has been assumed to follow the cubic shear stress law. The thermohydrostatic (THS) rheological performance of asymmetric hole-entry hybrid journal bearing configurations are studied. The computed results indicate that variation of viscosity due rise in temperature and non-Newtonian behavior of the lubricant affects the performance of asymmetric hole-entry hybrid journal bearing system quite significantly.

The THS rheological solution of a hole-entry hybrid journal bearing system requires the simultaneous solution of Reynolds equation, 3D energy equation and 3D conduction equation along with appropriate boundary conditions. In present study an iterative numerical solution scheme is used to establish pressure and temperature fields in the lubricant fluid-film.

The computed results indicate that variation of viscosity due rise in temperature and non-Newtonian behavior of the lubricant affects the performance of asymmetric hole-entry hybrid journal bearing system quite significantly.

The available literature concerning the orifice compensated asymmetric hole-entry hybrid journal bearings indicates that the thermal effects together with non-Newtonian behavior of lubricant due to additives mixed in the lubricants have been ignored in the analysis so as to obviate the mathematical complexity. The bearing performance characteristics have been presented considering the combined influence of rise in temperature and non-Newtonian behavior of the lubricant for asymmetric bearing configurations.

This paper aims to describe the theoretical study concerning the effect of non‐linear behavior of the lubricant on the performance of symmetric constant flow valve compensated hole‐entry hybrid journal bearing. The bearing performance characteristics have been computed for various values of non‐linearity factor, land width ratio, aspect ratio and external load.

The analysis considers the generalized Reynolds equation governing the flow of lubricant having variable viscosity in the clearance space and equation of flow of lubricant through constant flow valve restrictor. The non‐Newtonian lubricant is assumed to follow the cubic shear stress law.

The study indicates that for generation of accurate bearing characteristics data, the inclusion of non‐linear effects of lubricant in the analysis is essential.

The performance characteristics in terms of minimum fluid‐film thickness, fluid‐film stiffness and damping coefficients, critical mass and threshold speed for a wide range of values of the non‐linearity factor and external load are presented. The results presented are expected to be quite useful to bearing designers.

The purpose of this paper is to present theoretical investigations of the static performance characteristics of orifice compensated symmetric hole‐entry hybrid journal bearing considering the combined influence of rise in temperature and non‐Newtonian behavior of the lubricant.

The thermohydrostatic (THS) rheological solution of a hole‐entry hybrid journal bearing system requires the simultaneous solution of Reynolds equation, energy equation and conduction equation along with appropriate boundary conditions. In the present study an iterative numerical solution scheme is used to establish pressure and temperature fields in the lubricant fluid‐film.

It is found that there is an increase in the oil requirement for a hybrid journal bearing with the specified operating and geometric parameters, when the viscosity of the lubricant decreases due to the rise in temperature and non‐Newtonian behavior of the lubricant.

The available literature concerning the orifice compensated symmetric hybrid/hydrodynamic journal bearings indicates that the thermal effects together with non‐Newtonian behavior of lubricant due to additives mixed in the lubricants have been ignored in the analysis so as to obviate the mathematical complexity.

The purpose of this paper is to present a theoretical study of non-Newtonian effects in conical squeeze-film plates that is based on the Rabinowitsch fluid model.

A non-linear, modified Reynolds equation accounting for the non-Newtonian properties following the cubic stress law equation is derived. Through a small perturbation method, first-order closed-form solutions are obtained.

It is found that the non-Newtonian properties of dilatant fluids increase the load capacity and lengthen the response time as compared to the case using a Newtonian lubricant; however, the non-Newtonian behaviors of pseudoplastic lubricants result in reverse influences.

Numerical tables for squeeze-film loads of conical plates are also provided for engineering applications.

The present work aims to predict accurately the bearing design data for non‐recessed hybrid journal bearings, considering the effect of non‐Newtonian behavior of lubricant for different symmetric and non‐symmetric bearing geometric configurations.

The simultaneous solution of generalized Reynold's equation governing the laminar flow of incompressible lubricant and the equation of flow of lubricant through the capillary restrictor, considering variable viscosity of lubricant following the “Power law”, has been carried out using FEM. For a given set of bearing geometric, operating parameters and for given external vertical load, the values of various performance characteristics have been obtained for a range of values of power law index, after establishing the journal center equilibrium position, the analysis for which has been elaborately explained.

The results obtained have been presented graphically for various bearing performance characteristics. It has been observed that with decrease in power law index “n”(0<n≤1), the value of h¯_min and load carrying capacity decreases, while bearing flow rate increases for all configuration. The load‐carrying capacity of asymmetric configurations is better and stable over entire range of restrictor design parameter. Bearing configuration with land width ratio = 0.25 and aspect ratio = 1.0, having two rows of holes and six holes in each row, will be better suited for high‐load support, as it has maximum value of minimum fluid film thickness, moderate value of bearing flow and value of attitude angle is almost constant.

The performance characteristics of journal bearing have been presented for a wide range of values of power law index and for different values of restrictor design parameter for capillary restrictor, after establishing the journal center equilibrium position. The comparison of the different symmetric and non‐symmetric journal‐bearing configurations to find the best geometric configuration at different operating conditions, considering the effect of non‐Newtonian behavior of lubricant, represents the originality of the work.

The modified Reynolds equation for non-Newtonian lubricant is derived using the viscous adsorption theory for thin-film elastohydrodynamic lubrication (TFEHL) of circular contacts. The proposed model can reasonably calculate the phenomenon in the thin-film lubrication (TFL) unexplained by the conventional EHL model. The differences between classical EHL and TFEHL with the non-Newtonian lubricants are discussed.

The power-law lubricating film between the elastic surfaces is modeled in the form of three layers: two adsorption layers on each surface and one middle layer. The modified Reynolds equation with power-law fluid is derived for TFEHL of circular contacts using the viscous adsorption theory. The finite difference method and the Gauss–Seidel iteration method are used to solve the modified Reynolds equation, elasticity deformation, lubricant rheology equations and load balance equations simultaneously.

The simulation results reveal that the present model can reasonably calculate the pressure distribution, the film thickness, the velocity distribution and the average viscosity in TFL with non-Newtonian lubricants. The thickness and viscosity of the adsorption layer and the flow index significantly influence the lubrication characteristics of the contact conjunction.

The present model can reasonably predict the average viscosity, the turning point and the derivation (log film thickness vs log speed) phenomena in the TFEHL under constant load conditions.

The purpose of this paper is to investigate the effects of non-Newtonian rheology on the dynamic characteristics of a secant-shaped couple-stress lubricated slider bearing.

By applying the linear dynamic theory to the film force equation, a closed-form solution of the stiffness and damping coefficients is obtained for the secant-shaped bearing taking into account the non-Newtonian effects of Stokes couple stress fluids.

Comparing with the secant-shaped Newtonian-lubricant bearing, the effects of non-Newtonian couple stresses provide an apparent improvement in the dynamic stiffness and damping characteristics, especially for the secant-shaped slider bearing operating at lower squeezing-film heights and with larger non-Newtonian couple stress parameters.

Comparing with those of the inclined plane-shaped non-Newtonian slider bearings, better dynamic stiffness and damping performances are provided for the secant-shaped non-Newtonian slider bearing designed at larger values of the shoulder parameters. The advantages of secant-shaped slider-bearing types provide engineers useful information in bearing selection and engineering application.

The purpose of this study is to present a theoretical investigation of the effects of cavitation and couple stress on the squeeze film behavior between an anisotropic poroelastic rigid disc and a sinusoidally oscillating rigid disc.

Based on the microcontinuum theory of Vijay Kumar Stokes and the Elrod–Adam algorithm, the non-Newtonian Reynolds equation coupled with modified Darcy's law for lubricant flow through the porous disc is derived. This numerical study includes the continuity of tangential velocity at the porous–fluid interface and the effects of percolation of the polar additives into the anisotropic porous disc.

The effects of couple stress, oscillating amplitude, percolation additives, permeability and anisotropic permeability on the squeeze film characteristics are discussed. It is found that both the percolation effect of the lubricant additives and the anisotropic structure of the porous surface reduce the flow in the porous disc, resulting in a decrease in pressure. It is also observed that cavitation effects are more pronounced for Newtonian fluids than couple stress fluids.

The results of this study can be used to design a variety of engineering applications such as bearings, wet clutches and non-contact mechanical seals.

Several researchers have observed that to satisfy modern day’s need, it is essential to enhance the characteristics of journal bearing, which is used in numerous applications. Moreover, the use of Newtonian fluid as a lubricant is diminishing day by day, and the use of Non-Newtonian fluids is coming more into picture. Furthermore, if turbo-machinery applications are taken into account, then it can be seen that journal bearings are used for high speed applications as well. Thus, neglecting turbulent conditions may lead to erroneous results. Hence, this paper aims to present focuses on studying the stability characteristics of finite hydrodynamic journal bearing under turbulent coupled-stress lubrication.

First, the governing equation relevant to the problem is generated. Then, the dynamic analysis is carried out by linear perturbation technique, leading to three perturbed equations, which are again discretized by finite difference method. Finally, these discretized equations are solved with the help of Gauss-Seidel Iteration technique with successive over relaxation scheme. Consequently, the film response coefficients and the stability parameters are evaluated at different parametric conditions.

It has been concluded from the study that with increase in value of the coupled-stress parameter, the stability of the journal may increase. Whereas, with increase in Reynolds number, the stability of the journal decreases. On the other hand, stability increases with increasing values of slenderness ratio.

Researches have been performed to study the dynamic characteristics of journal bearing with non-Newtonian fluid as the lubricant. But in the class of non-Newtonian lubricants, the use of coupled-stress fluid has not yet been properly investigated. So, an attempt has been made to perform the stability analysis of bearings with coupled-stress fluid as the advanced lubricant.