Search results

The selective laser melting (SLM) technique, as a typical additive manufacturing process, is widely used for the fabrication of metallic biomedical components. In terms of biodegradability, zinc and its alloys represent an emerging generation of metallic materials for biomedical implants. The purpose of this paper is to obtain the Zn and Zn10Mg alloys with high mechanical properties using the SLM technology. The relationship between the processing parameters and the porosity of pure Zn and Zn10Mg alloy samples was investigated.

The samples were fabricated using SLM technology working in an inert gas closed chamber. Preliminary experiments were conducted to analyze the laser power and gas flow on evaporation, single track form and porosity. To evaluate the influence of factors on relative density, the response surface methodology was applied.

The satisfactory results of the proposed method were achieved, in which the relative density of the components reached up to 99.63%, and compression strength reached 214 ± 13 MPa under optimal processing conditions.

Zinc is categorized by its low melting and boiling point, which leads to the high porosity of the components. It is difficult to prepare the Zn alloy samples with high relative density using SLM technology. This work successfully achieved dense Zn and Zn10Mg samples and investigated their microstructure, mechanical properties and corrosion behavior.

Megaproject performance measurement (MPM) has received great attention in the project management community, but it primarily focused on the design of performance measures or frameworks. Yet, whether MPM utilization can improve megaproject performance and how project actors use MPM to improve megaproject performance is less well understood. This study aims to investigate whether and how the use of MPM can contribute to better megaproject performance.

Through the lens of the lever of control, this study conceptualizes MPM utilization as diagnostic use and interactive use. A holistic research model and related hypotheses integrating MPM use, project complexity and megaproject performance were established. The model was validated using a partial square-structural equation modeling method.

Based on 214-megaproject data collected through a questionnaire survey in China, the results show positive effects of diagnostic use and interactive use on megaproject performance. Both, however, have substitutional interaction effects. The moderating results suggest that the higher project complexity weakens the positive effects of MPM utilization on megaproject performance.

This study advances megaprojects performance measurement and management literature by validating the value of MPM utilization on performance. It also presents practical implications for project managers to improve performance by appropriate MPM utilization.

Showrooming presents a complex and evolving challenge to retail managers, as it signifies the emergence of new forms of exchange rules. The purpose of this research is to investigate how factors responsible for information search and evaluation affect showrooming and also consider the consumer mindset as a moderator.

This research undertakes three experimental designs to investigate how the push (i.e. assortment size), pull (i.e. price discount), and mooring (i.e. sunk cost) factors influence consumers' showrooming intention. Specifically, consumers' maximizing tendency plays the role of moderator.

The results reveal that push, pull, and mooring factors are significantly related to consumers' showrooming intention. Furthermore, the findings show that maximizers have higher showrooming intention than satisficers in the context of the push, pull, and mooring factors.

By integrating the push-pull-mooring framework and the maximizing mindset theory, this research proposes a novel research model and the empirical testing results support six hypotheses. The findings add to the body of knowledge in showrooming behavior by taking consumer mindset into account. The results also provide implications for practitioners to develop their retail strategies.

This study examines why and when nurses' role ambiguity leads to their work alienation during the COVID-19 pandemic.

Survey data were collected from 335 hospital nurses in Ma’anshan, China. The data were analyzed using hierarchical regression and bootstrapping.

Occupational disidentification mediated the relationship between role ambiguity and work alienation. This mediating effect was not significant when nurses possessed a high level of perceived climate of prioritizing COVID-19 infection prevention (PCIP).

To reduce nurses' work alienation in a pandemic situation, the hospital management team should pay attention to and try to minimize the nurses' role ambiguity and occupational disidentification. When doing so, the management team will find it particularly helpful if they can make nurses perceive a strong climate of PCIP.

This study contributes to the existing knowledge of role ambiguity and work alienation by highlighting occupational disidentification as a mediator after controlling for organizational identification in the context of COVID-19. It further demonstrates when the mediating role of occupational disidentification is likely to be strong or weak by studying the moderating effect of perceived climate of PCIP.

The purpose of this paper was prepared a Ni-based superhydrophobic coating on the surface of copper to enhence its corrosion resistance. The superhydrophobic coating (SHPC) has proven to be an effective surface treatment in corrosion protection. In this paper, a Ni-based SHPC was prepared on the surface of copper (Cu) to enhance its corrosion resistance.

The coating was prepared through a two-step electrodeposition process. The first step involves the formation of a micro-nano structure Ni layer formed by an electrodeposition process. Subsequently, the polysiloxane layer was deposited on the Ni surface to create an SHPC. The morphology, composition, structure, wettability and corrosion resistance of the coating were characterized and discussed.

The results show that the water contact angle of the as-prepared coating reaches 155.5°±1.0°. The corrosion current density (i_corr = 3.90 × 10⁻⁹ A·cm⁻²) decreased by three orders of magnitude compared to the substrate, whereas |Z|_{f = 0.01 Hz} (2.40 × 10⁶ Ω·cm²) increased by three orders of magnitude. It indicated that the prepared coating has excellent superhydrophobicity and high corrosion resistance, which can provide better protection for the substrate.

The prepared coating provides long-lasting protection for Cu and other metals and offers valuable data for developing SHPCs.

Integrated project delivery (IPD) project that does not use multiparty agreement is identified as IPD-ish. The use of IPD-ish arrangement by incorporating integration practices in conventional contract can be viewed as the part of the adoption process of IPD. Moreover, inappropriate integration practices invite new forms of risks and the absence of multiparty agreement adds to the challenges of risk management in IPD-ish projects. This study discusses such challenges and proposes the use of joint risk management to address the potential pitfalls in IPD-ish arrangement.

A mixed research method was applied. First, the criticality of IPD-ish general and integration-specific risks was examined through a survey. Second, a real IPD-ish project was used to exemplify the use of joint risk management (JRM) to manage IPD-ish risks.

Two types of risks, namely integration risks (IRs) and general risks (GRs), are identified in IPD-ish projects. Two major findings for the IRs: (1) the most critical IRs are related to unbalanced incentivization and inefficient multidisciplinary teams; and (2) only team formation related pre-contract JRM strategies affect IRs. As for the GRs, the most critical ones are associated with design issues and can be effectively mitigated by post-contract JRM.

Using IPD-ish arrangement is an inevitable part of implementation of full IPD. This happens as many change-averse owners would like to test the integration principles using a conventional contract that they are familiar with. In fact, success in IPD-ish would pave the path for further adoption of IPD. This study offers insight into categorization of risks in IPD-ish projects. Appropriate use of post-contract and organization related pre-contract JRM would improve the chance of teasing out the values of IPD through IPD-ish arrangements. Care should be taken to introduce some contracting integration initiatives, such as risk/reward sharing incentive.

In the context of constructing an integrated national strategic system, collaborative innovation among enterprises is the current social focus. Therefore, in order to find the interest relationship between multiple game subjects, to explore the influencing factors of collaborative innovation of civil-military integration enterprises. This paper constructs a collaborative innovation mechanism for military–civilian integration involving four game subjects (military enterprises, private enterprises, local governments, and science and technology intermediaries). It aims to solve and reveal the evolutionary game relationship among the four parties.

To explore the mechanism of military–civilian collaborative innovation involving four players, this study employs game theory and constructs an evolutionary game model for collaborative innovation with the participation of military enterprises, civilian enterprises, local governments, and technology intermediaries. The model reveals the evolutionary game patterns among these four entities, analyzes the impact of various parameters on the evolutionary process of the game system, and numerical simulation is used to show these changes more specifically.

The research findings demonstrate that active government subsidies promote cooperation throughout the system. Moreover, increasing the input-output ratio of research and development (R&D), the rate of technological spillovers, and the R&D investment of civilian enterprises all facilitate the tendency toward cooperation within the system. However, when the government chooses to actively provide subsidies, increasing R&D investment in military enterprises may hinder the tendency toward cooperation. Furthermore, central transfer payments, government punishment from the central government, and an increase in the information conversion rate of technology intermediaries may suppress the rate of cooperation within the system.

Most of the previous studies on the collaborative innovation of military–civilian integration have been tripartite game models between military enterprises, private enterprises, and local governments. In contrast, this study adds science and technology intermediaries on this basis, reveals the evolution mechanism of collaborative innovation of civil-military integration enterprises from the perspective of four-party participation, and analyzes the factors influencing the cooperation of the whole system. The conclusion of this study not only enriches the collaborative innovation evolution mechanism of military–civilian integration enterprises from the perspective of multiple agents but also provides practical guidance for the innovation-driven development of military–civilian integration enterprises.

In recent decades, infrastructure has continued to develop as an important basis for social development and people's lives. Resource management of these large-scale projects has been immensely concerned because dozens of construction enterprises (CEs) often work together. In this situation, resource collaboration among enterprises has become a key measure to ensure project implementation. Thus, this study aims to propose a systematic multi-agent resource collaborative decision-making optimization model for large projects from a matching perspective.

The main contribution of this work was an advancement of the current research by: (1) generalizing the resource matching decision-making problem and quantifying the relationship between CEs. (2) Based on the matching domain, the resource input costs and benefits of each enterprise in the associated group were comprehensively analyzed to build the mathematical model, which also incorporated prospect theory to map more realistic decisions. (3) According to the influencing factors of resource decision-making, such as cost, benefit and attitude of decision-makers, determined the optimal resource input in different situations.

Numerical experiments were used to verify the effectiveness of the multi-agent resource matching decision (MARMD) method in this study. The results indicated that this model could provide guidance for optimal decision-making for each participating enterprise in the resource association group under different situations. And the results showed the psychological preference of decision-makers has an important influence on decision performance.

While the MARMD method has been proposed in this research, MARMD still has many limitations. A more detailed matching relationship between different resource types in CEs is still not fully analyzed, and relevant studies about more accurate parameters of decision-makers’ psychological preferences should be conducted in this area in the future.

Compared with traditional projects, large-scale engineering construction has the characteristics of huge resource consumption and more participants. While decision-makers can determine the matching relationship between related enterprises, this is ambiguous and the wider range will vary with more participants or complex environment. The MARMD method provided in this paper is an effective methodological tool with clearer decision-making positioning and stronger actual operability, which could provide references for large-scale project resource management.

Large-scale engineering is complex infrastructure projects that ensure national security, increase economic development, improve people's lives and promote social progress. During the implementation of large-scale projects, CEs realize value-added through resource exchange and integration. Studying the optimal collaborative decision of multi-agent resources from a matching perspective can realize the improvement of resource transformation efficiency and promote the development of large-scale engineering projects.

The current research on engineering resources decision-making lacks a matching relationship, which leads to unclear decision objectives, ambiguous decision processes and poor operability decision methods. To solve these issues, a novel approach was proposed to reveal the decision mechanism of multi-agent resource optimization in large-scale projects. This paper could bring inspiration to the research of large-scale project resource management.

The application of three-dimensional (3D) printing technology in construction projects is of increasing interest to researchers and construction practitioners. Although the application of 3D printing technology at various stages of the project lifecycle has been explored, few studies have identified the relative importance of critical success factors (CSFs) for implementing 3D printing technology in construction projects. To address this research gap, this study aims to explore the academics (i.e. researchers) and construction practitioners’ perspectives on CSFs for implementing 3D printing technology in construction projects.

To do this, a questionnaire was administered to participants (i.e. academics and construction practitioners) with knowledge and expertise in 3D printing technology in construction projects. The collected data were analysed using mean score ranking, normalization and rank agreement analysis to identify CSFs and determine the consistency of the ranking of CSFs between academics and construction practitioners. In addition, exploratory factor analysis was used to identify the relationships and underlying constructs of the measured CSFs.

Through a rank agreement analysis of the collected data, 11 CSFs for implementing 3D printing technology were retrieved (i.e. 17% agreement), indicating a diverse agreement in the ranking of the CSFs between academics and construction practitioners. In addition, the results show three key components of CSFs including “production demand enabling CSFs”, “optimize the construction process enabling CSFs” and “optimized design enabling CSFs”.

This study highlights the feasibility of implementing the identified CSFs for 3D printing technology in construction projects, which not only serves as a reference for other researchers but also increases construction practitioners’ awareness of the practical benefits of implementing 3D printing technology in construction projects. Specifically, it would optimize the construction lifecycle processes, enhance digital transformation and promote sustainable construction projects.

This study aims to investigate the relationships between the perceived neighborhood walkable environment (PNWE), neighborhood interaction (NI) and residents’ mental health, with a focus on examining differences among residents of different age groups.

Using an electronic survey questionnaire, data on PNWE, NI and mental health were collected from 1,159 residents across 205 communities in Shanghai, China. Our study utilized a structural equation modeling (SEM), employing the maximum likelihood estimation method. The structural equation model was fitted using the MPLUS software.

The mental health of young and middle-aged adults is generally poor, and they are at higher risk of depression than children and older adults. The effects of PNWE and NI on the mental health of residents varied among different age groups. As residents get older, their mental health is more affected by the PNWE. In addition, the influence of the PNWE on children and older adults’ mental health is direct and not mediated by NI. For young and middle-aged adults, the influence of the PNWE on their mental health needs to be mediated by NI.

This study marks the first examination of the relationship between PNWE, NI and mental health among different age groups of residents in China. The findings of this research can assist policymakers in gaining a deeper understanding of the underlying mechanisms by which PNWE affects mental health. Furthermore, it can contribute to the development of more targeted walkable environment designs aimed at enhancing mental health among various age groups.