Search results

The Internet of Things (IoT) real-time data collection can help to more efficiently optimize and control companies' internal processes. Prior research analyzed IoT benefits and potential applications. Nevertheless, there is little empirical evidence and theoretical understanding of how IoT impacts new product development (NPD). This article aims at narrowing this gap.

In total, 54 case studies were selected from an IoT database – IoT ONE. IoT ONE has a section on NPD. NPD was divided into three phases: discovery, development and commercialization. The adopted IoT technology maturity level was also analyzed. A content analysis was carried out to identify the impacts of IoT in NPD.

This study’s findings capture the emerging patterns of IoT adoption and its impact on NPD. Of the total, 33 IoT adoption cases in the sample were in the machinery and equipment sector. Adopted technologies were at least two years old in 85% of the sample. Only 15% adopted cutting edge technologies (less than 2 years old). Key actors (e.g. vendors) facilitate IoT adoption. By a small margin, the larger impacts of IoT were in the commercialization phase, where it was primarily applied to improve and optimize production processes, to better execute and synchronize new products launching, and to increase the factories' productive capacity. In the discovery phase, IoT was mainly used to identify new opportunities in the market and to collect customer data, to generate a better customer experience. In the development phase, IoT allows greater integration across departments, increasing internal collaboration and allowing more flexible NPD.

Many articles studied the impact of information technologies in NPD. Few address the impact of IoT in NPD. IT tells about the impact of better communications with relevant people. IoT tells about machine acquired information and knowledge. This is new, much broader and deals with quite different impacts on NPD.

The purpose of this study is to develop an appropriate new product development (NPD) process of Company “T”, a medium-sized firm, by analyzing the existing NPD process and failure cases of the Company.

The proposed research framework is as follows: first, prospective studies of the NPD process are performed using the existing literature and preliminary references; second, comparative analysis between the current processes and a NPD process is performed; third, phase-based evaluations upon failed product cases are conducted with a NPD process so as to identify the abridged steps and root-causes of failures; finally, renewed priorities are set forth by utilizing the analytic hierarchy process analysis and questionnaire analysis upon the above identified causes of failures.

The resulting accomplishments include the establishment of NPD processes that resonates with the current states of Company “T”, which, in turn, ensures the increase of efficiency, the decrease in development duration and the strategy of capacity-concentration and priority-selection.

As Company “T”’s development process is outdated and products are developed without adequate market information research and feasibility analysis, the percentage of failed development project is as high as 87 per cent. Thus, this study aims to develop an appropriate NPD process of Company “T” by analyzing the existing NPD process and failure cases of the Company.

This paper aims to explore how customer involvement unfolds in the development of a smart product. Smart product development poses new challenges to firms. In particular, the buyers’ and users’ involvement has shown novel dynamics in smart product development. These peculiarities are linked with the specific characteristics of the digital technology embedded into the smart products. This study’s rationale is to analyse the frictions arising from potential divergent objectives between the focal firm and its customers when digital technologies are embedded in traditional products.

This study adopted an explorative and qualitative approach to investigate new emerging dynamics of customer involvement during technological development. A coffee machine producer is selected as a case study to uncover new insights and a novel perspective on the phenomenon of customer involvement in smart product development. Data analysis followed an abductive approach that allowed to identify the dimensions of friction emerging during the technological development process.

The case study analysis depicts that smart product development presents novel customer involvement dynamics. In particular, this study abductively identifies dimensions of friction emerging between the focal firm and buyers/users. Friction arises in the technological interface between the actors involved. These dimensions of friction address the complexities of developing technology in terms of smart products with customer involvement. This study suggests that embedding of technology into an existing product might change how customers are involved.

Even though customer involvement in product innovation has been extensively studied in management literature, this paper focused on a new type of innovation, smart products. To the best of the authors’ knowledge, no previous studies have yet empirically explored customers’ involvement while embedding digital technologies into existing products to create smart products. In particular, this study sheds light on the dimensions of friction emerging between the focal firm and the actors of the business network. This study unfolds novel contributions to the Industrial Marketing and Purchasing literature on technological development.

This study attempts to create new insights into innovation management through the integration of innovation management processes and sustainable, iterative circles. Through the exploration of the use of sustainable, iterative circles in a manufacturing environment, this paper explores their role in facilitating customer-focused innovation practices. Other supporting antecedences for innovative behavior are reviewed, and their combined effect upon delivering cost-effective product developments are assessed.

Data were collected through semi-structured interviews in manufacturing organizations from the automotive industry. Interviews were conducted with senior functional managers to interpret the application of sustainable, iterative development circles. Analysis of the data was undertaken via thematic analysis based upon pertinent and emergent themes.

Sustainable, iterative development circles overcame the inherent path-dependency of traditional linear development approaches, whereas, traditional approaches structure the involvement of key business functions, iterative circles facilitate more flexible approaches to product development that more closely met the requirements of the customer, especially when those requirements are in a state of flux.

This iterative, customer-centric approach to product development reflects the increasingly dynamic market environments in which manufacturing organizations operate. Using this approach helps to focus the organization’s attention upon customer requirements rather than the challenges of adhering to the rigid dogma of a chosen development methodology.

This study proposes a new approach toward the development of innovations in manufacturing organizations utilizing the sustainable, iterative circles, and therefore, contrasts with the traditional, linear development methodologies that are usually employed.

This case study examines the new product development (NPD) process of digital information products (DIPs) and its critical success factors (CSFs) in a small-sized German enterprise.

A case study was conducted with a small firm focused on the development of DIPs; data were obtained through semi-structured interviews, direct observation and document analysis.

The firm uses an informal and cross-functional NPD process (idea generation, idea validation, product creation and product launch) in converting an idea into a sellable product. Peculiar aspects of each stage within the process as well as ten CSFs to NPD projects were verified.

Limitations are attributed to its qualitative nature, which does not allow generalizations, though careful attention was given to validity and reliability issues through the use of data source triangulation.

The paper provides a conceptual process that may benefit further initiatives for developing and launching DIPs, as well as a comprehensive list of CSFs for such projects.

This paper is the first one to schematize the NPD process and practices for DIPs, as well as key capabilities. It contributes to the NPD literature in discussing dynamic aspects that are typical to the firm analyzed and to others operating in a digital context. At the same time, it reinforces other traditional aspects that have become overlooked in digital business debates.

Continuous understanding of the best practices associated with new product development is a constant research opportunity to advance knowledge in the field, as far as changes in the business environment and the increasing turbulence level in different market segments create and reposition the importance of practices over time.

Based on a systematic review, the study aimed to analyze the 100 most relevant articles published in international journals on new product development (NDP), identifying new patterns on the best practices for new product development and the types of relationship involved in NPD.

Among the several practices observed in the literature, the analysis point to a larger group of studies that converge on the identification of a positive and significant relationship in integration – simultaneously – between supplier, company, customers and strategic alliances and the performance of NPD.

These results support integration as a cross-cutting and structural best practice for NPD, as long as it is constituted as a capacity, mainly applied in highly turbulent environments. This approach supported the proposition of a new framework.

Organizations will be able to implement the proposed framework to NPD strategy in order to prioritize resources in best practices, aiming to increase the performance of new product development.

The adoption of integration and co-creation practices for the development of new products expands the possibilities of economic and social development, based on the involvement of the actors in this network.

This model had not yet been proposed in the literature, filling a gap in the agenda for future studies.

This study aims to focus on creating sales capability as part of new product development (NPD). The aim is to define generic requirements for building sales capability as a part of NPD and to propose a necessary process by defining key activities for sales readiness.

An inductive and qualitative research method was used to construct a sales capability creation process based on a current state analysis in seven companies.

The results indicate that the status of companies’ sales-related planning varies during the NPD, and the related activities are not systematically managed. Considering sales early is necessary to enable a smooth and cost-efficient start of sales, and to avoid unnecessary delays and problems in other functions. At the same time, the companies recognise the need for improvement.

This paper presents a potential process including systematic activities for creating sales capability in conjunction with product development, which is novel to the literature. The proposed process is applicable in aligning industrial company needs.

This study aims to shed lights on the dynamics of involving and sharing knowledge with stakeholders in the process of new service development (NSD) over time.

The paper is based on a paradigmatic case focused on the development of the digital MBA program by the School of Management of Politecnico di Milano. Primary and secondary data have been largely collected and analyzed, involving multiple stakeholders of the development process.

This study describes how several stakeholders have been involved during the phase of the NSD process, showing two variables that ruled their involvement: the level of control exerted by the School on the stakeholders and the level of flexibility of the stakeholders.

This research offers insights to the understanding of the dynamics of involving and sharing knowledge with multiple-stakeholders in NSD. From a theoretical perspective, it contributes to stakeholder theory linking it with the service management literature, highlighting the role of cyclical fluctuations in the involvement activities.

This research offers insights to managers dealing with the development of new services, offering them a novel view on how various stakeholders may be involved over time, in different moment and in different ways, to properly enhance the development process thanks to their knowledge sharing.

This paper contributes to the service management literature emphasizing the role of multiple stakeholders while providing insights and suggestions to manage the complex relationships created by their involvement and their knowledge.

The use of modern technologies of the fourth industrial revolution, commonly known as “Industry 4.0” (I4.0), is believed to have considerable potential for product customisation. In this context, this paper aims to explore whether or not using these technologies impacts customer participation (CP) in a firm's new product development (NPD) process.

To empirically test the proposed relationships, the authors collected the North Italian manufacturing firms' data and applied regression analysis.

Empirical results indicate that, on the one hand, the technologies have their specific and individual impacts, and on the other hand, the firms which use more I4.0 technologies allow more customer participation in their product design and production process. This positive impact is more robust in product design than in the production process.

Managers aiming to benefit from CP should broaden the scope of adopting I4.0 technologies and consider different roles concerning the design and production phases of the new product development process. Recognising the importance and allowing CP in NPD will enable firms to meet the customised demands.

To the best of the authors' knowledge, the proposed relationships of this study have been extensively debated theoretically in the I4.0 context but never empirically tested before. It is one of the few studies which discusses the strategic adoption and the combined use of I4.0 technologies to create more opportunities for product customisation.