Search results

The stone dust column was used to strengthen the sample and had a significant effect on improving the shear strength of the kaolin clay. The application of stone columns, which can improve the overall carrying capacity of soft clay as well as lessen the settlement of buildings built on it, is among the most widespread ground improvement techniques throughout the globe. The performance of foundation beds is enhanced by their stiffness values and higher strength, which could withstand more of the load applied. Stone dust is a wonderful source containing micronutrients for soil, particularly those derived from basalt, volcanic rock, granite and other related rocks. The aim of this paper is to evaluate the properties of soft clay reinforced with encapsulated stone dust columns to remediate problematic soil and obtain a more affordable and environmentally friendly way than using other materials.

In this study, the treated kaolin sample's shear strength was measured using the unconfined compression test (UCT). 28 batches of soil samples total, 12 batches of single stone dust columns measuring 10 mm in diameter and 12 batches of single stone dust columns measuring 16 mm in diameter. Four batches of control samples are also included. At heights of 60 mm, 80 mm and 100 mm, respectively, various stone dust column diameters were assessed. The real soil sample has a diameter of 50 mm and a height of 100 mm.

Test results show when kaolin is implanted with a single encased stone dust column that has an area replacement ratio of 10.24% and penetration ratios of 0.6, 0.8 and 1.0, the shear strength increase is 51.75%, 74.5% and 49.20%. The equivalent shear strength increases are 48.50%, 68.50% and 43.50% for soft soil treated with a 12.00% area replacement ratio and 0.6, 0.8 and 1.0 penetration ratios.

This study shows a comparison of how sample types affect shear strength. Also, this article provides argumentation behind the variation of soil strength obtained from different test types and gives recommendations for appropriate test methods for soft soil.

Given the COVID-19 Pandemic outbreak and the role of medical textiles for protection, this study aims to identify the leading research foci on using textile materials for personal protection in pandemic situations.

A systematic review and systemic analysis of the literature on the subject were performed using the process knowledge development – constructivist (ProKnow-C) methodology.

A bibliographic portfolio with 16 relevant studies was obtained. This portfolio represents the main focus of this research field, including the main filtration mechanisms, ways of disinfecting N95 respirators and proposed methods to evaluate the filtration efficiency of different materials with potential for mask development.

To the best of the authors’ knowledge, this is the first time the ProKnow-C methodology was used in the textile field. Thus, future studies can benefit from using the Proknow-C for selecting and analyzing relevant textile studies following a systematic approach.

This study explores how titanium oxide (TiO₂) filler influences the specific wear rate (SWR) in flax fiber-reinforced epoxy composites (FFRCs) through a Taguchi approach. It aims to boost abrasive wear resistance by incorporating TiO₂ filler, promoting sustainable and eco-friendly materials.

This study fabricates epoxy/flax composites with TiO₂ particles (0–8 wt%) using hand layup. Composites were tested for wear following American Society for Testing and Materials (ASTM) G99-05. Statistical analysis used Taguchi design of experiments (DOE), with ANOVA identifying key factors affecting SWR in abrasive sliding conditions.

The study illuminates how integrating TiO2 filler particles into epoxy/flax composites enhances abrasive wear properties. Statistical analysis of SWR highlights abrasive grit size (grit) as the most influential factor, followed by normal load, wt% of TiO₂ and sliding distance. Grit size has the highest effect at 43.78%, and wt% TiO₂ filler contributes 15.61% to SWR according to ANOVA. Notably, the Taguchi predictive model closely aligns with experimental results, validating its reliability.

This paper integrates TiO₂ filler and flax fibers to form a novel hybrid composite with enhanced tribological properties in epoxy composites. The use of Taguchi DOE and ANOVA offers valuable insights for optimizing control variables, particularly in natural fiber-reinforced composites (NFRCs).

The purpose of this study is to investigate the impact of titanium oxide (TiO₂) filler on the abrasive wear properties of bamboo fiber reinforced epoxy composites (BFRCs) using a Taguchi approach. The study aims to enhance the abrasive wear resistance of these composites by introducing TiO₂ filler as a potential reinforcement, thus contributing to the development of sustainable and environmentally friendly materials.

This study focuses on the fabrication of epoxy/bamboo composites infused with TiO₂ particles within the Wt.% range of 0–8 Wt.% using hand layup techniques. The resulting composites were subjected to wear testing according to ASTM G99-05 standards. Statistical analysis of the wear results was carried out using the Taguchi design of experiments (DOE). Additionally, an analysis of variance (ANOVA) was used to determine the influential control factors impacting the specific wear rate (SWR) and coefficient of friction (COF).

The study illuminates how integrating TiO₂ filler enhances abrasive wear in epoxy/bamboo composites. Statistical analysis of SWR highlights abrasive grit size (grit) as the most influential factor, followed by normal load, Wt.% of TiO₂ and sliding distance. Analysis of the COF identifies normal load as the primary influential factor, followed by grit, Wt.% of TiO₂ and sliding distance. The Taguchi predictive model closely aligns with experimental results, validating its reliability. The morphological study revealed significant differences between the unfilled and TiO₂-filled composites. The inclusion of TiO₂ improved wear resistance, as evidenced by reduced surface damage and wear debris.

This research paper aims to integrate TiO₂ filler and bamboo fibers to create an innovative hybrid composite material. TiO₂ micro and nanoparticles show promise as filler materials, contributing to improved tribological properties of epoxy composites. The utilization of Taguchi’s DOE and ANOVA for statistical analysis provides valuable guidance for academic researchers and practitioners in optimizing control variables, especially in the context of natural fiber reinforced composites.

Dehydrated bacterial cellulose’s (BC) intrinsic rigidity constrains applicability across textiles, leather, health care and other sectors. This study aims to yield a novel BC modification method using glycerol and succinic acid with catalyst and heat, applied via an industrially scalable padding method to tackle BC’s stiffness drawbacks and enhance BC properties.

Fabric-like BC is generated via mechanical dehydration and then finished by using padding method with glycerol, succinic acid, catalyst and heat. Comprehensive material characterizations, including international testing standards for stiffness, bending properties (cantilever method), tensile properties, moisture vapor transmission rate, moisture content and regain, washing, thermal gravimetric analysis, derivative thermogravimetry, Fourier-transform infrared spectroscopy and colorimetric measurement, are used.

The combination of BC/glycerol/succinic acid dramatically enhanced porous structure, elongation (27.40 ± 6.39%), flexibility (flexural rigidity of 21.46 ± 4.01 µN m; bending modulus of 97.45 ± 18.20 MPa) and moisture management (moisture vapor transmission rate of 961.07 ± 86.16 g/m²/24 h; moisture content of 27.43 ± 2.50%; and moisture regain of 37.94 ± 4.73%). This softening process modified the thermal stability of BC. Besides, this study alleviated the drawbacks for washing (five cycles) of BC and glycerol caused by the ineffective affinity between glycerol and cellulose by adding succinic acid with catalyst and heat.

The study yields an effective padding process for BC softening and a unique modified BC to contribute added value to textile and leather industries as a sustainable alternative to existing materials and a premise for future research on BC functionalization by using doable technologies in mass production as padding.

Denim fabric has become a wardrobe staple due to its versatility to be worn in a variety of fashions. This paper aims to study denim fabrics to understand their unique hand by developing a hand evaluation system using computational method. Also, the effect of various washes was studied on the hand and surface morphology of denim fabrics.

Five different denim samples were manufactured with various washing treatments. The Kawabata Evaluation System was used to measure the low stress mechanical properties. Computation method was used to develop hand equations using multiple regression technique in the MS Excel software. The correlation coefficient analysis was done to determine the authenticity of the developed equations. Five primary hand attributes such as softness, smoothness, fullness, flexibility and stretchability were shortlisted by a panel of judges that influence the fabric handle.

The correlation coefficient between subjective and computational total hand values with thermal properties and without thermal properties was 0.88 and 0.85, respectively. The enzymatic wash fabric has the highest total hand value followed by the acid, bleach and stone-washed fabrics.

Although the hand evaluation system is available for conventional textiles like suiting and shirting fabrics, the method to predict fabric hand of non-conventional textiles such as denim fabrics remains an unexplored topic. The stresses acting on denim fabrics are completely different. Therefore, to the best of the author’s knowledge, a novel attempt has been made in this research work to develop a computational model to predict the total hand value of denim fabrics.

This paper aims to estimate the performance of protective clothing used to resist puncture (anti-stab property).

Seven single-layer (one layer) samples were investigated in this research. The first three samples were already used for the purpose of (anti-stab property), manufactured from Du-Pont product (commercial samples). The rest of the samples were locally designed and manufactured for the same purpose. These seven samples have then been examined after been added in conjunction with WL Kevlar XP (S 104) witness multilayers (eight layers) panel to create which are called multilayer samples.

The results of the statistical analysis for one-way ANOVA illustrated significant effect for single layer samples for all properties. While for multi-layer samples, the results showed a significant difference for all variables except displacement. The Tukey post hoc test observed a significant effect for some samples; also, other samples show a non-significant effect between samples.

It was observed that the locally manufactured samples serve the purpose as (anti-stab samples) compared with the commercial samples. The radar chart shows that for single-layer sample, the fifth sample fulfill the highest radar chart area, whereas for multi-layer samples, the sixth sample achieved the highest radar chart area.