Search results

This paper aims to investigate the effect of shear rate, concentration (4–20 kg/m³) and temperature (20°C–60 °C) on the apparent viscosity of apricot gum solutions.

Apparent viscosity has been measured using a rotational viscometer.

It has been observed that the shear stress and apparent viscosity values increase at high concentrations in the prepared apricot gum solutions. However, it is understood that the higher the temperature in the operation conditions, the lower the apparent viscosity results. Power-law is found the best-fitting model to illustrate the changes in temperature and concentration. According to the consistency coefficient and flow behavior indices, the apricot gum displayed shear-thinning behavior (pseudoplastic). The apricot gum is a polysaccharide with amino and uronic acids, according to Fouirer Transform Infrared Spektrofotometre spectra.

The results suggest that power-law model can be used to estimate the viscosity of apricot gum solutions at different temperatures and concentrations for applications for which flow behavior should be taken into account.

Exudate gums have good rheological properties and, therefore, are widely used in the food industry. Apricot gum is a biodegradable and abundant polysaccharide that enhances viscosity, stabilizes suspension or emulsion and improves the flow properties of foods. Different rheological models are used to investigate rheological properties. However, those models are time-independent to fit the experimental data.

The purpose of this study is to successfully apply ultrasonic waves for the quick extraction of flax seed gum from flaxseed hull or whole seed and compare it to the standard technique of extraction.

The effect of the heating source, extracted time, temperature and pH of extracted solution on the extraction was studied. The obtained gum is subsequently used for silk screen printing on cotton, linen and viscous fabrics. Rheological properties and viscosity of the printing paste were scrutinized in the current study to get a better insight into this important polysaccharide. The output of this effort aimed to specify the parameters of the processes for printing textiles to serve in women’s fashion clothes by applying innovated handmade combinations of Islamic art motives using a quick and affordable method. Seven designs are executed, and inspiring from them, seven fashion designs of ladies’ clothes were designed virtually by Clo 3D software.

The result recorded that the new gum has excellent printing properties. In addition, they have better rheological properties, viscosity, chromatic strength and fastness qualities, all of which could help them in commercial production.

Flaxseed and three different fabric types (Cotton, Linen and Viscous) were used.

Synthesis of a new biodegradable thickener from a natural resource, namely, flaxseed, by applying new technology to save time, water and energy.

Synthesis of eco-friendly biodegradable thickener and used in textile printing alternative to the synthetic thickener.

The purpose of this study is to detect the effect of some natural cellulosic polymers in their nano forms with the addition of zinc oxide nanoparticles on restoring the lost mechanical strength of degraded papyrus without any harmful effects on the inks.

In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging.

In the current study, the USB digital microscopy, scanning electron microscope, measurement of mechanical properties (tensile and elongation), pH measurement, color change and infrared spectroscopy were undertaken for the samples before and after treatment and aging.

The effect of strengthening materials was studied on cellulose and carbon ink, which makes this study closer to reality as the manuscript is the consistent structure of cellulose and inks, whereas most of the literature stated the impact of consolidation materials on the strengthening the cellulosic supports without attention to their impact on inks.

This paper aims to study the color change kinetics of lac dye in response to pH and food spoilage metabolites (ammonia, lactic acid and tyramine) for its potential application in intelligent food packaging.

UV-Vis spectroscopy was used to study the color change of dye solution. Ratio of absorbance of dye solution at 528 nm (peak of ionized form) to absorbance at 488 nm (peak of unionized form) was used to study the color change. Color change kinetics was studied in terms of change in absorbance ratio (A528/A488) with time using zero- and first-order reaction kinetics. An indicator was prepared by incorporating lac dye in agarose membrane to validate the result of study for monitoring quality of raw milk.

Dye was orange-red in acidic medium (pH: 2 to 5) and exhibited absorbance peak at 488 nm. It turned purple in alkaline medium (pH: 7 to10) and exhibited absorbance peak at 528 nm. The change in absorbance ratio with pH followed zero-order model. Acid dissociation constant (pKa) of dye was found to be 6.3. Color change of dye in response to ammonia and tyramine followed zero-order reaction kinetics, whereas for lactic acid, the first-order model was found best. In the validation part, the color of the indicator label changed from purple to orange-red when the milk gets spoiled.

The study opens a new application area for lac dye. The results suggest that lac dye has potential to be used as an indicator in intelligent food packaging for detection of spoilage in seafood, meat, poultry and milk.

The purpose of this paper is to provide an early assessment of India’s South-South cooperation for trade and technology (SSTT) with East Africa, focusing on Ethiopia, Rwanda, Kenya, Uganda and Tanzania. It aims to analyse the role of SSTT in providing support to targeted sectors.

The paper examines SSTT, focusing on India and East Africa over a specific period (2000–2016) of its emergence, and extends the public sponsorship literature in international business (IB) to better understand the relationship between SSTT and value addition – applying to a particular case study of SSTT interventions in spices.

The paper highlights SSTT as a pathway to support value addition in global value chains (GVCs). Trade between India and East African countries has grown, with three developments over the period of analysis in particular: shifting trade patterns, growing share of intermediate goods trade and differences in GVC insertion. However, East African exports are largely of lower value. Capacity building to support processing capability and thriving markets can encourage greater value addition. Preliminary findings suggest early gains at the margins, as SSTT interventions have been focusing on capacity boosting with buffering and bridging mechanisms for increased volume of trade. Moving up the value chain however requires that specific value-enhancing activities continue to be targeted, building on regional capacities. Our high-level case study for spices suggests that activities are starting to have a positive effect; however, more focus is needed to specifically target value creation before export and in particular higher levels of processing.

While findings are preliminary, policy implications emerge to guide SSTT interventions. There is capacity for building higher value-added supply chains as is evident among East African countries that trade with each other – future SSTT programmes could tap into this and help build capacity in these higher-value value chains. Future SSTT programmes can take a comprehensive approach by aiming at interventions at key points of the value chain, and especially at points that facilitate higher value addition than initial processing. An example is that Ethiopia and Rwanda are likely to benefit from an expanded spice industry, but the next phase should be towards building processing for value-addition components of the value chain, such as through trade policies, incentivising exporters to add value to items before export. From a development perspective, more analysis needs to be done on the value chain itself – for instance, trade facilitation measures to help processers engage in value chains and to access investments for increasing value add activities. (iv), Future research should examine more closely the development impacts of SSTT, namely, the connection between increased trade, local job creation and sustained innovation, as it is these tangible benefits that will help countries in the Global South realise the benefits of increased trade.

The paper underlines how the SSTT approach can contribute to the critical IB and GVCs literature using a theoretical grounded approach from public sponsorship theory, and with a unique lens of development cooperation between countries in the global south and its emerging impact on development outcomes in these countries.

This study aims to assess the efficacy of nano-alumina (nano-Al₂O₃) in improving the performance of epoxy adhesives used to assemble archaeological glass. The conservators face a significant problem in assembling this type of artifact. Therefore, the assembling process is considered one of the important stages that must be taken care of to preserve these artifacts from damage and loss.

To evaluate the stability of adhesives, the samples were subjected to artificial aging under varying environmental conditions. Some investigative techniques and mechanical testing were used in this study to evaluate the selected materials. It includes a transmission electron microscope, X-ray diffraction, visual assessment, digital microscope, scanning electron microscopy (SEM), color change and tensile strength test.

The visual evaluation and the digital microscope results showed that the epoxy/nano-Al₂O₃ greatly resisted artificial aging. Although slight yellowing was present, it did not significantly affect the general appearance of the samples. On the other hand, the pure epoxy sample showed cracks of different sizes on its surface due to aging, as evidenced by SEM examination. Furthermore, epoxy/nano-Al₂O₃ has a better tensile strength (11.27 MPa) and slight color change (ΔE = 2.06).

The main objective of the experimental study was to identify appropriate adhesive materials that possess key properties such as non-yellowing and improved tensile strength by conducting various tests and evaluations. Ultimately, the goal was to identify materials that could serve as effective adhesives for assembling the archaeological glass.

The type 120 emergency valve is an essential braking component of railway freight trains, but corresponding diaphragms consisting of natural rubber (NR) and chloroprene rubber (CR) exhibit insufficient aging resistance and low-temperature resistance, respectively. In order to develop type 120 emergency valve rubber diaphragms with long-life and high-performance, low-temperatureresistant CR and NR were processed.

The physical properties of the low-temperature-resistant CR and NR were tested by low-temperature stretching, dynamic mechanical analysis, differential scanning calorimetry and thermogravimetric analysis. Single-valve and single-vehicle tests of type 120 emergency valves were carried out for emergency diaphragms consisting of NR and CR.

The low-temperature-resistant CR and NR exhibited excellent physical properties. The elasticity and low-temperature resistance of NR were superior to those of CR, whereas the mechanical properties of the two rubbers were similar in the temperature range of 0 °C–150 °C. The NR and CR emergency diaphragms met the requirements of the single-valve test. In the low-temperature single-vehicle test, only the low-temperature sensitivity test of the NR emergency diaphragm met the requirements.

The innovation of this study is that it provides valuable data and experience for future development of type 120 valve rubber diaphragms.

This study aims to investigation of the guar gum-manganese dioxide (GG/MnO₂) nanocomposite (NC) synthesized using an environment-friendly method and the degradation of reactive yellow (RY 145) dye in the UV system.

Characterization of the GG/MnO₂ NCs were conducted using field emission scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy. Experiments were conducted using a 1 L glass reactor coupled with Ultraviolet (UV-C) blue light bulb of wavelength 250 nm and power of 8 W.

The NC (2.25 g/L) displayed high RY 145 dye degradation (81%) with 10 mg/L of concentration at pH 3. The coefficient of determination (R² 0.99) also depicted that the model fits the experimental data. The analysis of variance (ANOVA) showed that the F-values of 464.75, 276.04 and 5.15 are related to the dose of GG/MnO₂ NCs, initial concentration of RY 145 dye and solution pH, respectively.

The GG/MnO₂ NCs followed by photo oxidation process (UV-process) could be used to degrade the RY 145 dye from synthetic wastewater.

There are two main innovations. One is that the novel process is performed successfully for RY 145 dye degradation. The other is that the optimized conditions are obtained by Box–Behnken design. Also, the effects of different variables on the RY 145 dye removal efficiency were investigated.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

The purpose of this study is to investigate the authors' previously prepared and fully characterized poly (methacrylamide)-chitosan nanoparticles (CNPs) graft copolymer having 50.2% graft yield with respect to flocculation efficiency for ferric laurate aqueous dispersions. This was done to compare the ability of the latter cheap, biodegradable and ecofriendly hybrid natural-synthetic polymeric substrate as a flocculant in comparison with higher cost, nonbiodegradable and harmful polyacrylamide as a well-known synthetic flocculant counterpart.

The graft copolymerization process was carried out at 450°Cfor 120 min using (1.0 g) CNPs, methacrylamide (1.5 g), 100 mmol/l potassium chromate and 80 mmol/l mandelic acid. Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and specific viscosity were used to characterize and analyze the resultant copolymer. The flocculation efficiency was conferred in terms of transmittance % and weight removal %. The main factors influencing the flocculation process, such as flocculent dose, flocculation medium pH, stirring speed, flocculation temperature and grafting extent, were comprehensively discussed.

The flocculation efficiency of the prepared copolymers revealed the following findings: increased by increasing the flocculant dose, pH, temperature and stirring speed to a maximum values denoted at 30 ppm, 6.0, 30°C and 50 r/min, respectively, then decreased thereafter; increased by increasing the extent of grafting within the range studied; showed a comparable flocculation efficiency in comparison with polyacrylamide as a synthetic polymeric flocculent; and, finally, a preliminary bridging mechanism representing the attraction between the anionic suspended particles ferric laurate and cationic poly (MAam)-CNPs graft copolymer has been projected.

The advancement addressed here is undertaken with using the authors’ poly (MAam)-CNPs graft copolymers having different extent of grafting (a point which is not cited in the literature especially for the authors’ prepared copolymer) as a hybrid natural-synthetic polymeric substrate as a flocculant for ferric laurate aqueous dispersions in comparison with the high cost and nondegradable polyacrylamide synthetic flocculant.