Search results

The purpose of this study is to describe the steady mixed convection stagnation point of a hybrid nanofluid with a second-order velocity slip.

Using appropriate similarity variables, the partial differential equations are transformed into ordinary (similar) differential equations, which are numerically solved using the bvp4c function in MATLAB. The numerical results are used to present graphical illustrations for the reduced skin friction, reduced Nusselt number, velocity and temperature profiles.

Dual solutions are discovered in this study. Thus, stability analysis is implemented and the first (upper branch) and second (lower branch) solutions are determined and analyzed.

Hybrid nanofluids have many practical applications in the modern industry such as in micro-manufacturing, periodic heat exchanges process, nano drug delivery system and nuclear reactors.

Despite numerous studies on the mixed convection stagnation point of classical viscous fluids past a vertical plate flow, none of the researchers have focused on the effect of second-order slip velocity on hybrid nanofluids. The behavior of the flow and heat transfer has been thoroughly analyzed with the variations in governing parameters such as heat source/sink and nanoparticle volume fraction. Moreover, the use of the wall slip velocity in this hybrid nanofluid model strengthened the novelty of this study.

The purpose of this study is to investigate the influence of the second order slip velocity on the boundary layer stagnation point flow of a nanofluid past a non-aligned stretching/shrinking sheet.

Proper similarity variables are used to transform the system of partial differential equations into a system of ordinary (similarity) differential equations. This system is then solved numerically using the bvp4c solver in MATLAB software. As in the papers by Kuznetsov and Nield (2010, 2013) and Fang et al. (2009), the authors considered the stretching/shrinking parameter λ, the first-order (a₁, a₂) and second-order (b₁) slip parameters and the Lewis number Le, Nb the Brownian parameter and Nt the thermophoresis parameter fixed at Le = 10, Nb = Nt = 0.5 when the Prandtl number Pr is fixed at Pr = 1.

Dual solutions are found as the sheet is shrunk in the horizontal direction. Stability analysis shows that the first solution is physically realizable, whereas the second solution is not practicable.

The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Wang (2008) and Lok et al. (2011) to the case of nanofluids.

This paper aims to study numerically the steady natural convective heat transfer of a hybrid nanosuspension (Ag-MgO/H2O) within a partially heated/cooled trapezoidal region with linear temperature profiles at inclined walls under an effect of uniform Lorentz force. This investigation is useful for researchers studying in the area of cavity flows to know features of the flow structures and nature of hybrid nanofluid characteristics. In addition, a detailed entropy generation analysis has been performed to highlight possible regimes with minimal entropy generation rates.

The governing equations formulated using the Oberbeck–Boussinesq approach and single-phase nanoliquid model are transformed to a non-dimensional form by using non-dimensional variables. The obtained equations with appropriate boundary conditions are resolved by the finite difference technique. The developed code has been validated comprehensively. Analysis has been performed for a wide range of governing parameters, including Rayleigh number (Ra = 105), Prandtl number (Pr = 6.82), Hartmann number (Ha = 0–100), magnetic field inclination angle (φ = 0–?/2) and nanoparticles volume fraction (φ_hnf = 0 and 2%).

It has been shown that inclined magnetic field can be used to manage the energy transport performance. An inclusion of nanoparticles without Lorentz force influence allows forming more stable convective regime with descending heat plume in the central zone, while such a regime was performed for clear fluid only for moderate and high Hartmann numbers. Moreover, the average overall entropy generation can be decreased with a growth of the Hartmann number, while an addition of hybrid nanoparticles allows reducing this parameter for Ha = 30 and 50. The average Nusselt number can be increased with a growth of the nanoparticles concentration for low values of the magnetic field intensity.

Governing equations written using the conservation laws and dimensionless non-primitive variables have been resolved by the finite difference approach. The created numerical code has been verified by applying the grid independence test and computational outcomes of other researchers. The comprehensive analysis for various key parameters has been performed.

The purpose of this study is to analyze numerically the steady axisymmetric rotational stagnation point flow impinging on a radially permeable stretching/shrinking sheet in a nanofluid.

Similarity transformation is used to convert the system of partial differential equations into a system of ordinary (similarity) differential equations. This system is then reduced to a system of first-order differential equations and solved numerically using the bvp4c function in MATLAB software.

Dual solutions exist when the surface is stretched, as well as when the surface is shrunk. For these solutions, a stability analysis is carried out revealing that the first solution (upper branch) is stable and physically realizable, while the second solution (lower branch) is unstable and therefore not physically realizable.

The present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Weidman (2016) to the case of nanofluids.

The purpose of this paper is to numerically study the problem of mixed convection flow of a hybrid nanofluid past a vertical wedge with thermal radiation effect.

The governing nonlinear partial differential equations are transformed into a system of ordinary differential equations by a similarity transformation, which is then solved numerically through the function bvp4c from MATLAB for different values of the governing parameters. The solutions contain a mixed convection parameter λ that has a considerable impact on the flow fields.

It is found that the solutions of the ordinary (similarity) differential equations have two branches, upper and lower branch solutions, in a certain range of the mixed convection and several other parameters. To establish which of these solutions are stable and which are not, a stability analysis has been performed. The effects of the governing parameters on the fluid flow and heat transfer characteristics are illustrated in tables and figures. It is found that dual (upper and lower branch) solutions exist for both the cases of assisting and opposing flow situations. A stability analysis has also been conducted to determine the physical meaning and stability of the dual solutions.

This theoretical study is significantly relevant to the applications of the heat exchangers placed in a low-velocity environment and electronic devices cooled by fans.

The case of mixed convection flow of a hybrid nanofluid past a vertical wedge with thermal radiation effects has not been studied before, and hence all generated numerical results are claimed to be original and novel.

This paper aims to present the steady dual solutions on three-dimensional flow and heat transfer of nanofluid over a permeable non-linearly shrinking surface with two-order velocity slips conditions. Boundary layer assumption is considered in the mathematical modelling. Authors comprehend from previous studies and papers that the shrinking surfaces are extremely important in current engineering and environmental systems.

Using appropriate similarity variables, the full partial differential equations (PDF) are modified into a specific set of ordinary (similar) differential equations (ODE). The resulting non-linear ordinary differential system is then solved both analytically for some particular cases and numerically for the general case using the function bvp4c from MATLAB for characteristic values of the parameters which govern the equations. The transformed mathematical model is analysed using the bvp4c procedure. Based on the given assumptions, this study is able to produce multiple solutions of the problem.

The ordinary (similarity) differential equations have two branches solutions, upper and lower branch solutions, given some interval of shrinking and velocity slip parameters. The authors consider here a temporal stability analysis, as they want to establish which of the solutions are stable and which are not. In a distinct paragraph, the authors discuss in detail and present in a graphical manner the effects of shrinking and second-order slip flow model on the skin friction coefficient, surface wall heat flux and dimensionless velocity and temperature profiles. The analysis reveals that the second order slip has a big influence on the flow and heat transfer characteristics.

The present discoveries are unique and truly new for the research of the three-dimensional stretching/shrinking forced convection flow and heat transfer nanofluids. The nanofluid is a water-based nanofluid (H₂O), which contains one type of nanoparticles, namely, copper (Cu). Of course, the analysis can be further extended considering other types of nanoparticles such as alumina (Al₂O₃). The authors assume that the thermal equilibrium is reached for the base fluid together with the suspended nanoparticles and that the nanoparticles are uniform in dimension and form.

This study aims to investigate the dual solutions for axisymmetric flow and heat transfer due to a permeable radially shrinking disk in copper oxide (CuO) and silver (Ag) hybrid nanofluids with radiation effect.

The partial differential equations that governed the problem will undergo a transformation into a set of similarity equations. Following this transformation, a numerical solution will be obtained using the boundary value problem solver, bvp4c, built in the MATLAB software. Later, analysis and discussion are conducted to specifically examine how various physical parameters affect both the flow characteristics and the thermal properties of the hybrid nanofluid.

Dual solutions are discovered to occur for the case of shrinking disk (λ < 0). Stronger suction triggers the critical values’ expansion and delays the boundary layer separation. Through stability analysis, it is determined that one of the solutions is stable, whereas the other solution exhibits instability, over time. Moreover, volume fraction upsurge enhances skin friction and heat transfer in hybrid nanofluid. The hybrid nanofluid’s heat transfer also heightened with the influence of radiation.

Flow over a shrinking disk has received limited research focus, in contrast to the extensively studied axisymmetric flow problem over a diverse set of geometries such as flat surfaces, curved surfaces and cylinder. Hence, this study highlights the axisymmetric flow due to a shrinking disk under radiation influence, using hybrid nanofluids containing CuO and Ag. Upon additional analysis, it is evidently shows that only one of the solutions exhibits stability, making it a physically dependable choice in practical applications. The authors are very confident that the findings of this study are novel, with several practical uses of hybrid nanofluids in modern industry.

This paper aims to report theoretical and numerical results for the problem of laminar axisymmetric flow of hybrid nanofluid over a permeable non-linearly stretching/shrinking sheet with radiation effect.

The numerical solutions of the arising boundary value problem are obtained using the function bvp4c from MATLAB for different values of the governing parameters.

It is found that the solutions of the ordinary (similarity) differential equations have two branches, upper and lower branch solutions, in a certain range of the stretching/shrinking and suction parameters. To establish which of these solutions are stable and which are not, a stability analysis has been performed.

To the best of the authors’ knowledge, present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Mustafa et al. (2015) to the case of hybrid nanofluids.

The purpose of this paper is to study the effects of MHD, suction, second-order slip and melting on the stagnation-point and heat transfer of a nanofluid past a stretching/shrinking sheet.

Using appropriate variables, the governing partial differential equations were transformed into ordinary (similarity) differential equations, which are then solved numerically using the function bvp4c from Matlab.

It is found that dual (upper and lower branch) solutions exist for some values of the governing parameters. From the stability analysis, it is found that the upper branch solution is stable, while the lower branch solution is unstable. The sample velocity, temperature and concentration profiles along both solution branches are graphically presented.

The results of the paper are new and original with many practical applications of nanofluids in the modern industry.

The purpose of this paper is to theoretically investigate the unsteady separated stagnation-point flow and heat transfer past an impermeable stretching/shrinking sheet in a copper (Cu)-water nanofluid using the mathematical nanofluid model proposed by Tiwari and Das.

A similarity transformation is used to reduce the governing partial differential equations to a set of nonlinear ordinary (similarity) differential equations which are then solved numerically using the function bvp4c from Matlab for different values of the governing parameters.

It is found that the solution is unique for stretching case; however, multiple (dual) solutions exist for the shrinking case.

The authors believe that all numerical results are new and original, and have not been published elsewhere.