Search results

The purpose of this paper is to report the resistance of plasma‐sprayed titanium dioxide (TiO₂) nanostructured coatings in a corrosive environment.

Weight loss studies are performed according to ASTM G31 specifications in 3.5 wt% NaCl. Electrochemical polarization resistance measurements are made according to ASTM G59‐91 specifications. Corrosion resistance in a humid and corrosive environment is determined by exposing the samples in a salt spray chamber for 100 h. Microstructural studies are carried out using an atomic force microscope and scanning electron microscope.

The nanostructured TiO₂ coatings offer good resistance to corrosion, as shown by the results of immersion, electrochemical and salt spray studies. The corrosion resistance of the coating is dictated primarily by the geometry of splat lamellae, density of unmelted nanoparticles, magnitude of porosity and surface homogeneity.

The TiO₂ nanostructured coatings show promising potential for use as abrasion, wear‐resistant and thermal barrier coatings for service in harsh environments.

The paper relates the corrosion resistance of nanostructured TiO₂ coatings to their structure and surface morphology.

The self-cleaning properties of nanostructured titanium dioxide facade coatings are useful in Singapore's tropical climate. However, its potential maintenance issues need to be determined right at the design stage. The purpose of this paper is to highlight the development of the design for maintainability tool which is a multicriteria design decision score sheet that evaluates the maintainability potential of nano-facade coating applications on high-rise façades with concrete and stonemasonry finishes and curtain walls.

Quantitative methods (expert and practitioner surveys) are conducted in this research study. Analytic hierarchy process (AHP) and sensitivity analysis were used to develop a robust Design for Maintainability tool.

Safety measures indicator received the highest weighted score by experts, while the maximizing performance, minimizing risk, minimizing negative environmental impact and minimizing consumption of matter and energy were the top ranking main criteria by both experts and practitioners. The top ranked design for maintainability sub-criteria identified by practitioners and experts were risk management, maintenance considerations, climatic conditions, safety measures, lifecycle cost and maintenance access, sun's path, rainfall intensity, biological growth measures and building age profile.

Most researches on the maintainability of nano-façade coatings uses experimentation to test the durability of nano-façade coatings, while this study focuses on design based empirical data such as establishing and ranking the list of design for maintainability criteria or indicators to minimize future defects and maintenance issues. The design for maintainability tool contributes to the maintainability of nano-façade coatings leading to maximizing its performance while minimizing cost, risks, resource consumption and negative environmental impact.

Nanostructured titanium dioxide (TiO₂) coatings can potentially address the current surge in façade cleaning cost, maintenance and labour problems. The purpose of this paper is to investigate potential maintainability issues and design challenges concerning the effective performance of TiO₂ façade coatings’ hydrophilic properties, especially in tropical environments such as Singapore. This paper aims to establish a list of green maintainability design criteria to help minimise future TiO₂ façade coating issues when this coating is applied on commercial buildings with concrete and stonemasonry façade materials.

A mixed-mode approach that includes a literature review, site investigation, instrumental case studies and expert interviews is used in this study.

TiO₂ coatings help improve façade performance whilst offering environmental benefits to society. This study reports that green maintainability design criteria are vital requirements in designing sustainable buildings at the outset. The identified defects and issues will aid in ensuring the effectiveness of TiO₂ application in building façades.

This study acts as a foundation for future researchers to strengthen this little researched area, serves as a useful guide in preventing possible TiO₂ coating issues and promotes industry awareness of the use of TiO₂ façade coatings.

TAs the intensity of ultraviolet (UV) radiation increases every year, effective methods to block UV rays to protect human skin, plastics, timber and other polymer materials are urgently sought. Textiles serve as important materials for UV protection in many applications. The utilisation of nanoparticles to textile materials has been the object of several studies aimed at producing finished fabrics with different performances. This article reviews the recent advancements in the field of UV blocking textiles and fibers that are functionalised with nanostructured surface coatings. Different types of UV blocking agents are discussed and various examples of UV blocking textiles that utilise zinc oxide (ZnO) and titanium dioxide (TiO₂) are presented. Future challenges, such as wash-fastness and photocatalysis, are also discussed.

This paper introduced the simple synthesis process of self-cleaning coating with fog-resistance property using hydrophobic polydimethylsiloxane (PDMS) polymer and nano-calcium carbonate (nano-CaCO₃) and titanium dioxide (TiO₂).

The synthesis method of PDMS/nano-CaCO₃-TiO₂ is based on sol-gel process. The crosslinking between PDMS and nanoparticles is driven by the covalent bond at temperature of 50°C. The 3-Aminopropyltriethoxysilane is used as binder for nanoparticles attachment in polymer matrix. Two fabrication methods are used, which are dip- and spray-coating methods.

The prepared coated glass fulfilled the requirement of standard self-cleaning and fog-resistance performance. For the self-cleaning test BS EN 1096-5:2016, the coated glasses exhibited the dust haze value around 20%–25% at tilt angle of 10°. For the antifog test, the coated glasses showed the fog haze value were below 2% and the gloss value were above 85%. The obtained results completely achieved the standard antifog value ASTM F659-06 protocol.

Findings will provide an infrastructure support for the building glass to enhance building’s energy efficiency, cleaning performance and friendly environment.

This study proposed the simple synthesis method using hydrophobic polymer and nano-CaCO₃ and nano-TiO₂, which can achieve optimum self-cleaning property at low tilt angle and fog-resistance performance for building glass.

The research findings have high potential for building company, cleaning building company and government sector. The proposed project capable to reduces the energy consumption about 20% per annum due to labor cost, time-consuming and safety during manual cleaning.

The novel method to develop self-cleaning coating with fog-resistance using simple synthesis process and fabrication method for building glass application.

This paper aims to verify weather atmospheric plasma spray (APS) in situ remelting posttreatment is effective for densifying the porous FeCoCrMoCBY amorphous alloy (FAA) coating and improving the antiabrasion and anticorrosion performances or not.

APS was used to deposit and in situ densify FAA coating on the 40Cr substrate. Scanning electron microscope, X-ray diffractometer, energy dispersive spectroscopy, neutral salt spray, hardness and wear behavior test were used to evaluate the densifying effects.

APS remelting technology can effectively improve the hardness of the coating by reducing the porosity. After remelting at 30 kW power, the hardness of the coating increased by about 260 HV0.2 and the porosity decreased to 2.78%. The amorphous content of the coating is 93.9%, which is about 3.5% lower than original powders. The electrochemical impedance spectrum and neutral salt spray test results show that APS remelting can reduce the corrosion rate by about 62.7%.

APS remelting method is firstly proposed in this work to replace laser remelting or laser cladding methods. APS remelting method can effectively improve the corrosion and abrasion resistance of the FAA coating by increasing the densification with much low recrystallization, which is big progress for application of FAA coatings.

This paper aims to design the nano-titanium dioxide (TiO₂) coating system which has superhydrophilic property, self-cleaning mechanism and antifog property as well as strong adhesion on glass substrate.

Two hydrophilic materials have been used such as TiO₂ nanoparticles as fillers and hydrophilic copolymer, Pluronic F-127 by using simple sol–gel approach. The prepared solution was applied onto glass through dip- and spray-coating techniques and then left for drying at ambient temperature.

The nano-TiO₂ superhydrophilic coating has achieved the water contact angle of 4.9° ± 0.5°. The superhydrophilic coating showed great self-cleaning effect against concentrated syrup and methylene blue where thin layer of water washes the dirt contaminants away. The nano-TiO₂ coating exhibits great antifog performance that maintains high transparency of around 89% when the coated glass is placed above hot-fog vapor for 10 min. The fog droplets were condensed into water film which allowed the transmission of light through the glass. The strong adhesion of coated glass shows no total failure at scratch profile when impacted with scratch load of 500, 800 and 1,200 mN.

Findings will be useful in the development of self-cleaning superhydrophilic coating that is applicable on building glass and photovoltaic panel.

The developed nano-TiO₂ coating is developed by the combination of hydrophilic organic copolymer–inorganic TiO₂ network to achieve great superhydrophilic property, optimum self-cleaning ability and supreme antifog performance.

The findings will be useful for residents in building glass window where the application will reduce dust accumulation and keep the glass clean for longer period.

The synthesis of nano-TiO₂ superhydrophilic coating which can be sprayed on large glass panel and cured at ambient temperature.

The purpose of this paper is to introduce flexible dye-sensitized solar cells (FDSSCs).

In the third generation solar cells, glass was used as a substrate, which due to its high weight and fragility, was not possible to produce continuously. However, in flexible solar cells, flexible substrates are used as new technology. The most important thing may choose a suitable substrate to produce a photovoltaic (PV) device with optimal efficiency.

Conductive plastics or metallic foils are the two main candidates for glass replacement, each with its advantages and disadvantages. As some high-temperature methods are used to prepare solar cells, metal substrates can be used to prepare PV devices without any problems. In contrast to the advantage of high thermal resistance in metals, metal substrates are dark and do not transmit enough light. In other words, metal substrates have a high loss of photon energy. Like all technologies, PV devices with polymer substrates have technical disadvantages.

In this study, the development of FDSSCs offers improved photovoltaic properties.

The most important challenge is the poor thermal stability of polymers compared to glass and metal, which requires special methods to prepare polymer solar cells. The second important point is choosing the suitable components and materials for this purpose.

Dependence of efficiency and performance of the device on the angle of sunlight, high-cost preparation devices components, limitations of functional materials such as organic-mineral sensitizers, lack of close connection between practical achievements and theoretical results and complicated fabrication process and high weight.

This study aims to investigate profoundly the protection of oil painting from deterioration using molybdenum trisulphide quantum dots (MoS3 QDs) against microbe, dirt accumulation and ultraviolet (UV) degradation.

The protection of painting against different deterioration factors necessitates the sustainable methods and advanced techniques. Scanning electron microscopy and transmission electron microscopy have been used to investigate the morphological structure of the painting and MoS3 QDs, respectively, and optical microscopy was used to examine antibacterial activity of MoS3 QDs towards different types of bacteria. To investigate the protection of painting against deterioration, the Fourier transform IR spectroscopy (FTIR) was used to investigate the paintings left in open air for a year. Chemical composition and crystal structure of MoS3 QDs have been studied using X-ray diffraction and X-ray photoelectron spectroscopy analysis, respectively.

The addition of MoS3 nanoparticles into painted coatings enhances the durability of linseed oil-based paintings toward UV ageing regarding the change in colour which confirmed by FTIR analysis. The protection of oil painting opposed to various deterioration factors was developed by involving of MoS3 QDs in the coating of the painting. Antibacterial effect of MoS3 QDs was tested against different types of bacteria such as Pseudomonas aeruginosa confirming that the MoS3 QDs involved in the coatings of oil paintings produces a high protection layer for the paintings against several microbial attacks. In addition, coatings containing MoS3 QDs reduce the accumulation of dirt on oil paintings when subjected to open air for a year.

The novel MoS3 QDs was used to form a protective and transparent coating layer for the oil painting to overcome the deterioration, displays the promising protection and can be applied for different oil paintings.

The purpose of this paper is to modify light hollow polymer microsphere (LHPM) with titanium dioxide nanoparticles (nano-TiO2) to improve its compatibility with latex and apply the obtained nano-TiO2/LHPM composite particles in external wall thermal insulation coatings.

The nano-TiO2/LHPM composite particles were prepared via vigorous stirring. The morphology and chemical composition of the produced nano-TiO2/LHPM composite particles were characterized using scanning electron microscopy, energy dispersion spectrum, thermo-gravimetric analyzer and Fourier transform infrared. The performance of this new composite coating was evaluated by checking its stability, density, radiation reflectivity, thermal conductivity and the resulting insulation temperature difference when forming coating film.

It was found that a 9:1 mass ratio of nano-TiO2/LHPM with total 10 weight per cent composite particles in the thermal insulation paint showed low density, good stability, low thermal conductivity (0.1687 W/m·K) and high insulation temperature difference (5.8°C).

The LHPM can be modified by other nanoparticles to improve its insulation performance in thermal insulation coatings.

This work provides a simple, robust, but effective approach to produce new thermal insulation coatings with nano-TiO2/LHPM composite particles.

This method for surface modification of LHPMs is novel and the modified hollow polymer microspheres could be applied to external wall insulation coatings.