Search results

The purpose of this paper is to formulate two component polyurethane coatings based on acrylic polyol, to study the effects of variable nanosilica loadings in these coatings on different morphological, optical, mechanical, corrosion resistance and weather resistance properties and to study the intercalation of acrylic polyol molecules into nanosilica crystals by XRD technique.

Two component polyurethane coatings were synthesised using acrylic polyol and isocyanate HDI. The nanosilica was incorporated in polyurethane formulation at the weight ratios of 1%, 3% and 5% based on total weight of polyol and isocyanate. The performance of nanocoatings was compared for variable loads of nanosilica for different properties such as morphological, optical, mechanical, corrosion resistance, weather resistance and were studied for intercalation of acrylic polyol into nanosilica crystals by XRD technique.

Improvement in the properties of polyurethane coatings is achieved with the incorporation of nanosilica. The improvement is the result of inherently high properties of inorganic nanosilica. Tensile strength, scratch hardness, abrasion resistance, corrosion and weathering resistance show significant improvement in performance with the incorporation of nanosilica. Properties are found to deteriorate beyond a certain loading of nanosilica; hence it is important to optimise loading level. The optimal range for high performance was found to be in the range of 1% to 3%. The improvement was a result of synergistic behaviour and good interfacial interaction between polyurethane and nanosilica at optimal levels.

The method used for incorporation of nanosilica into polyurethane was direct incorporation method. The other method of incorporation, i.e. in situ addition and its effect on properties can also be studied.

With the addition of optimal loading level of nanosilica to polyurethane coatings, properties can be enhanced up to the mark. The addition is relatively easy and cost effective.

The paper proves the significance of incorporation of nanosilica on original properties of polyurethane coatings and widens the area of applications of two component polyurethane coatings from acrylic polyol by strengthening them in their properties. The coatings can be applicable in high performance topcoats especially for automotive topcoats.

This review discusses the concept of edible nanocoatings (ENCs), the biomaterials used in the coating matrices, techniques of coating development, applications, challenges and safety regulations associated with nanotechnology in food products. These ENCs are capable of imparting increased shelf life, improved appearance, better physiological qualities and bioactive potentials such as antimicrobial and antioxidant properties. ENCs can be developed using the layer-by-layer method which forms multiple alternative layers adhered together primarily by electrostatic interactions.

Various keywords such as edible coatings (ECs), safety aspects and nanocoatings were used to search the literature from Google Scholar, Research Gate, ScienceDirect, Springer Link, Taylor and Francis and PubMed. After searching enough literature, 113 articles and research papers were examined, which provides the updated overview of different aspects of edible nano-coatings.

Consumers today are very much aware of the food quality and its safety. They demand food products with longer shelf life, which are minimally processed with natural or no preservatives. ECs based on biopolymers is an alternative technique, which is biodegradable and can be consumed as such without posing any safety risks. The emergence of nanotechnology in food processing has provided new insights to develop ECs at the nanoscale with improved mechanical and barrier properties

ECs are beneficial to consumers and to the environment. ECs have generated significant attention over years as an alternative to fossil-based plastics, considering their renewable and biodegradable features

This paper aims to investigate the thermal stability and hydrophobicity of difference alkyl chain of silanes with silicon (Si) micro- and nanoparticles.

Sol-gel methods have been used to design superhydrophobic glass substrates through surface modification by using low-surface-energy Isooctyl trimethoxysilane (ITMS) and Ethyl trimethoxysilane (ETMS) solution. Hierarchical double-rough scale solid surface was built by Si micro- and nanoparticles to enhance the surface roughness. The prepared sol was applied onto glass substrate using dip-coating method and was dried at control temperature of 400°C inside the tube furnace.

The glass substrate achieved the water contact angle as high as 154 ± 2° and 150.4 ± 2° for Si/ITMS and Si/ETMS films, respectively. The Si/ITMS and Si/ETMS also were equipped with low sliding angle as low as 3° and 5°, respectively. The Si micro- and nanoparticles in the coating system have created nanopillars between them, which will suspend the water droplets. Both superhydrophobic coatings have showed good stability against high temperature up to 200°C as there are no changes in WCA shown by both coatings. Si/ITMS film sustains its superhydrophobicity after impacting with further temperature up to 400°C and turns hydrophobic state at 450°C.

Findings will be useful to develop superhydrophobic coatings with high thermal stability.

Sol method provides a suitable medium for the combination of organic-inorganic network to achieve high hydrophobicity with optimum surface roughness.

Application of different alkyl chain groups of silane resin blending with micro- and nanoparticles of Si pigments develops superhydrophobic coatings with high thermal stability.

The purpose of this study is to evaluate the possibility of using titanium dioxide coating in the field of architectural heritage.

In this research, a titanium dioxide coating was prepared and then applied to the travertine stone surfaces. The nature of the coating was determined through various observations and analyses. Moreover, the effect of photocatalytic self-cleaning was evaluated using an organic dye (Rhodamine B).

The results of XRD, DLS and SEM confirmed the formation of small anatase crystals. The hydrophilic behavior on the surface was observed by coatings based on titanium dioxide.

The self-cleaning ability of titanium dioxide is due to the synergistic effect of its optical inductive property, which is activated with sunlight.

The self-cleaning coatings are interested for many industries. The reported data can be used by the formulators working in the research and development departments.

Self-cleaning systems are considered as smart coatings. Therefore, the developing of its knowledge can help to extend its usage to different applications.

The application of titanium dioxide coating in the field of architectural heritage is a great challenge. Therefore, in this research, a titanium dioxide coating was prepared by sol-gel method and then applied on travertine surfaces and its properties were studied.

Miniaturized smart sensors that can perform sensitive and selective real-time monitoring of target analytes are tremendously valuable for various sensing applications. So, the purpose of this paper is to provide details of sensors based on selective nanocoatings by combining trinitrotoluene (TNT) receptors bound to conjugated polydiacetylene (PDA) polymers with single-walled carbon nanotube field-effect transistors (CNTFETs) for detecting explosives TNT.

Following an introduction, this paper describes the way of creating an FET with CNTs, which are functionalized by the peptide based on TNT molecule recognition elements and PDA, to offer a system which has the capability of answering the presence of related target molecules (TNT). Finally, brief conclusions are drawn.

Single-wall nanotubes and reduced graphene oxide are interesting materials for creating biosensors of FETs at nanoscale because of unique electrical, mechanical, geometrical and biocompatible properties. Therefore, this sensor is designed and manufactured, and the results of applying TNT to sensor show good sensitivity and selectivity response.

In this timeframe of history, sensors based on CNTFET are required for different uses, including clinical diagnosis technologies, environmental tests and bioterrorism recognition technologies, that correspond to the military conflicts and terrorism. So, CNTFET sensor design provides real-time detection of TNT explosives.

Smart sensors based on graphene field effect transistor (GFET) and biological receptors are regarded as a promising nanomaterial that could be the basis for future generation of low-power, faster, selective real-time monitoring of target analytes and smaller electronics. So, the purpose of this paper is to provide details of sensors based on selective nanocoatings by combining trinitrotoluene (TNT) receptors (Trp-His-Trp) bound to conjugated polydiacetylene polymers on a graphene channel in GFET for detecting explosives TNT.

Following an introduction, this paper describes the way of manufacturing of the GFET sensor by using investigation methods for transferring graphene sheet from Cu foil to target substrates, which is functionalized by the TNT peptide receptors, to offer a system which has the capability of answering the presence of related target molecules (TNT). Finally, brief conclusions are drawn.

In a word, shortly after graphene discovery, it has been explored with a variety of methods gradually. Because of its exceptional electrical properties (e.g. extremely high carrier mobility and capacity), electrochemical properties such as high electron transfer rate and structural properties, graphene has already showed great potential and success in chemical and biological sensing fields. Therefore, the authors used a biological receptor with a field effect transistor (FET) based on graphene to fabricate sensor for achieving high sensitivity and selectivity that can detect explosive substances such as TNT. The transport property changed compared to that of the FET made by intrinsic graphene, that is, the Dirac point position moved from positive Vg to negative Vg, indicating the transition of graphene from p-type to n-type after annealing in TNT, and the results show the bipolar property change of GFET with the TNT concentration and the possibility to develop a robust, easy-to-use and low-cost TNT detection method for performing a sensitive, reliable and semi-quantitative detection in a wide detection range.

In this timeframe of history, TNT is a common explosive used in both military and industrial settings. Its convenient handling properties and explosive strength make it a common choice in military operations and bioterrorism. TNT and other conventional explosives are the mainstays of terrorist bombs and the anti-personnel mines that kill or injure more than 15,000 people annually in war-torn countries. In large, open-air environments, such as airports, train stations and minefields, concentrations of these explosives can be vanishingly small – a few parts of TNT, for instance, per trillion parts of air. That can make it impossible for conventional bomb and mine detectors to detect the explosives and save lives. So, in this paper, the authors report a potential solution with design and manufacture of a GFET sensor based on a biological receptor for real-time detection of TNT explosives specifically.

This study aims to investigate the effect of trisodium nitrilotriacetic acid (NTA) on the physical and luminescence emission properties of NaLuF4:Yb, Tm Upconversion (UC) particles and compared with trisodium citrate (CA). Upconversion materials have been remarkably considered in many applications in the past decades. However, the morphology of the UC particles affects their emission properties, depending on the synthesis situation.

The UC particles were synthesized by the hydrothermal method. Properties such as crystal phase, particle morphology, particle size, smoothness and uniformity of particle surface and their emission intensity in the UV–Vis region were studied.

Observations showed that pH is an essential factor in determining the crystalline phase. In addition, quality factors affect the morphology, particle size and surface smoothness of crystalline facets. It was also found that the UC particles synthesized in the presence of trisodium NTA have a much higher emission intensity than those synthesized in the presence of CA. The use of UC particles in security inks to maintain the brand was also investigated.

To the best of the authors’ knowledge, for the first time, the effect of trisodium NTA as a chelating agent was investigated on morphology and UC intensity of NaLuF4:Yb,Tm phosphor.