Search results

In the present work, a new blast-/ballistic-impact mitigation concept is introduced and its efficacy analyzed using advanced computational methods and tools. The concept involves the use of a zeolite protective layer separated by air from the structure being protected and in contact with a water layer in front. The paper aims to discuss these issues.

To properly capture the attendant nano-fluidics phenomena, all the calculations carried out in the present work involved the use of all-atom molecular-level equilibrium and non-equilibrium molecular-dynamics simulations.

Under high-rate loading, water molecules (treated as a nano-fluidic material) are forced to infiltrate zeolite nanopores wherein, due to complex interactions between the hydrophobic nanopore walls and the hydrogen bonds of the water molecules, water undergoes an ordering-type phase transition and acquires high density, while a significant portion of the kinetic energy of the water molecules is converted to potential energy. Concomitantly, a considerable portion of this kinetic energy is dissipated in the form of heat. As a result of these energy conversion/dissipation processes, the (conserved) linear momentum is transferred to the target structure over a longer time period, while the peak loading experienced by the structure is substantially reduced.

To the authors’ knowledge, the present work constitutes the first reported attempt to utilize pure SiO₂ hydrophobic zeolites in blast-/ballistic-impact protection applications.

This paper aims to study the fluid flow and heat transfer within the Casson nanofluid confined between disk and cone both rotating with distinct velocities. For a comprehensive investigation, two distinct nano-size particles, namely, silicon dioxide and silicon carbide, are submerged in ethanol taken as the base fluid.

This paper explores the disk and cone contraption mostly encountered for viscosity measurement in various industrial applications such as lubrication industry, hydraulic brakes, pharmaceutical industry, petroleum and gas industry and chemical industry.

It is worth mentioning here that the radially varying temperature profile at the disk surface is taken into the account. The effect of prominent emerging parameters on velocity fields and temperature distribution are studied graphically, while bar graphs are drawn to examine the physical quantities of industrial interest such as surface drag force and heat transfer rate at disk and cone.

To the best of the authors’ knowledge, no study in literature exists that discusses the thermal enhancement of nano-fluidic transport confined between disk and cone both rotating with distinct angular velocities with heat transfer.

The purpose of this paper is to design and develop 14-degree of freedom (DOF) robotic micromanipulator with which LIGA devices and axle hole part can be both manipulated and assembled.

The in-house robotic microassembly system is composed of a 6-DOF large motion serial robot with microgrippers, a hexapod six-DOF precision alignment worktable and a vision system whose optical axis of the microscope is parallel with the horizontal plane. A prism with special coating is fixed in front of the objective lens, thus, two-part figures can be acquired simultaneously by the microscope with 1.67 to 9.26 micron optical resolution. The relative discrepancy between the two parts can be calculated from image plane coordinate instead of calculating the space transformation matrix. A modified microgripper was designed to clamp meso-scale parts and its effectiveness was confirmed experimentally. Through the use of the other vision system, the insert action can be successfully manipulated. A laser ranger finder was integrated in this micro-assembly system to measure the assembly result.

A new 14-DOF robotic micromanipulator, including eight axes automatically and six axes manually, has been developed for the assembly of LIGA meso-scale flat parts and axle hole parts. The microassembly system with coaxial alignment function (MSCA) system is able to concurrently manipulate all eight axes automatically and six axes manually.

The robotic microassembly is applied in the assembly of meso-scale parts. The new capabilities of the MSCA will allow for the assembly of microsystems more efficiently and more precisely.

The purpose of this study is to provide that porous media and viscous dissipation are crucial considerations when working with hybrid nanofluids in various applications.Recent years have witnessed significant progress in optimizing these fluids for enhanced heat transfer within porous (Darcy–Forchheimer) structures, offering promising solutions for various industries seeking improved thermalmanagement and energy efficiency.

The first step is to transform the original partial differential equations into a system of first-order ordinary differential equations (ODEs). The fourth-order Runge–Kutta method is chosen for its accuracy in solving ODEs. The present study investigates the free convective boundary layer flow of hybrid nanofluids over a moving thin inclined needle with the slip flow brought about by inclined Lorentz force and Darcy–Forchheimer porous matrix, viscous dissipation.

It is found that slip conditions (velocity and Thermal) exist for a range of the natural convection boundary layer flow. In the hybrid nanofluid flow, which consists of Al₂O₃ and Fe₃O₄ are nanoparticles, H₂O − C₂H₆O₂ (50:50) are considered as the base fluid. The consequence of the governing parameter on the momentum and temperature profile distribution is graphically depicted. The range of the variables is 1 ≤ M ≤ 4, 1 ≤ d ≤ 2.5, 1 ≤ δ ≤ 4, 1 ≤ Fr ≤ 7, 1 ≤ Kr ≤ 7 and 0.5≤λ ≤ 3.5. The Nusselt number and skin friction factors are used to calculate the numerical values of various parameters, which are displayed in Table 4. These analyses elucidate that upsurges in the value of the Fr noticeably diminish the momentum and temperature. It is investigated to see if the contemporary results are in outstanding promise with the outcomes reported in earlier works.

The results can be very helpful to improve the energy efficiency of thermal systems.

The hybrid nanofluids in heat transfer have the potential to improve the energy efficiency and performance of a wide range of systems.

This study proposes that in the combined effects of hybrid nanofluid properties, the inclined Lorentz force, the Darcy–Forchheimer model for porous media and viscous dissipation on the boundary layer flow of a conducting fluid over a moving thin inclined needle. Assessing the potential practical applications of the hybrid nanofluids in inclined needles, this could involve areas such as biomedical engineering, drug delivery systems or microfluidic devices. In future should explore the benefits and limitations of using hybrid nanofluids in these applications.

Joule heating effect is a pervasive phenomenon in electro-osmotic flow because of the applied electric field and fluid electrical resistivity across the microchannels. Its effect in electro-osmotic flow field is an important mechanism to control the flow inside the microchannels and it includes numerous applications.

This research article details the numerical investigation on alterations in the profile of stream wise velocity of simple Couette-electroosmotic flow and pressure driven electro-osmotic Couette flow by the dynamic viscosity variations happened due to the Joule heating effect throughout the dielectric fluid usually observed in various microfluidic devices.

The advantages of the Joule heating effect are not only to control the velocity in microchannels but also to act as an active method to enhance the mixing efficiency. The results of numerical investigations reveal that the thermal field due to Joule heating effect causes considerable variation of dynamic viscosity across the microchannel to initiate a shear flow when EDL (Electrical Double Layer) thickness is increased and is being varied across the channel.

This research work suggest how joule heating can be used as en effective mechanism for flow control in microfluidic devices.

The purpose of this paper is to present different approaches for applying macroscopic boundary conditions in hybrid multiscale modelling.

Molecular dynamics (MD) was employed for the microscopic simulations. The continuum boundary conditions were applied either through rescaling of atomistic velocities or resampling based on velocity distribution functions.

The methods have been tested for various fluid flows with heat transfer scenarios. The selection of the most suitable method is not a trivial task and depends on a number of factors such as accuracy requirements and availability of computational resource.

The applicability of the methods has been assessed for liquid and gas flows. Specific parameters that affect their accuracy and efficiency have been identified. The effects of these parameters on the accuracy and efficiency of the simulations are investigated. The study provides knowledge regarding the development and application of boundary conditions in multiscale computational frameworks.

The purpose of this paper is to investigate nonlinear vibrations of triple-walled carbon nanotubes buried within Pasternak foundation carrying viscous fluids.

Considering the geometry of nanotubes, the governing equations were initially derived using Timoshenko and modified couple stress theories and by taking into account Von-Karman expressions. Then, by determining boundary conditions, type of fluid motion, Knudsen number and, ultimately, fluid viscosity, the principal equation was solved using differential quadrature method, and linear and nonlinear nanotube frequencies were calculated.

The results indicated that natural frequency is decreased as the fluid velocity and aspect ratio increase. Moreover, as the aspect ratio is increased, the results converge for simple and fixed support boundary conditions, and the ratio of nonlinear to linear frequencies approaches. Natural frequency of vibrations and critical velocity increase as Pasternak coefficient and characteristic length increase. As indicated by the results, by assuming a non-uniform velocity for the fluid and a slip boundary condition at Kn = 0.05, reductions of 10.714 and 28.714% were observed in the critical velocity, respectively. Moreover, the ratio of nonlinear to linear base frequencies decreases as the Winkler and Pasternak coefficients, maximum deflection of the first wall and characteristic length are increased in couple stress theory.

This paper is a numerical investigation of nonlinear vibration analysis for triple-walled carbon nanotubes conveying viscous fluid.

This paper aims to present the capacitance characterization of tapered dielectrophoresis (DEP) microelectrodes as micro-electro-mechanical system sensor and actuator device. The application of DEP-on-a-chip (DOC) can be used to evaluate and correlate the capacitive sensing measurement at an actual position and end station of liquid suspended targeted particles by DEP force actuator manipulation.

The capability of both, sensing and manipulation was analysed based on capacitance changes corresponding to the particle positioning and stationing of the targeted particles at regions of interest. The mechanisms of DEP sensor and actuator, designed in DOC applications were energized by electric field of tapered DEP microelectrodes. The actual DEP forces behaviour has been also studied via quantitative analysis of capacitance measurement value and its correlation with qualitative analysis of positioning and stationing of targeted particles.

The significance of the present work is the ability of using tapered DEP microelectrodes in a closed mode system to simultaneously sense and vary the magnitude of manipulation.

The integration of DOC platform for contactless electrical-driven with selective detection and rapid manipulation can provide better efficiency in in situ selective biosensors or bio-detection and rapid bio-manipulation for DOC diagnostic and prognostic devices.

The aim of present work is to study the flow and heat transport structures of hybrid nanoparticles in a moving material. Two types of hybrid nanoparticles have been chosen namely Al₂O₃-Cu and Al₂O₃-Ag nanoparticles (90%) within 10% of pure water.

Leading governing equations are transformed through similarity technique and then computed for numerical illustration by applying RKF method.

The author observed that the skin friction value of Al₂O₃-Cu/water case is lesser in comparison to the values of Nusselt number for Al₂O₃-Ag/water nanoparticles.

There exist no such study which addressed such phenomenon.