Search results

The purpose of this paper is to investigate the performance of Passive Direct Methanol Fuel Cell (PDMFC) experimentally using various Membrane Electrode Assembly (MEA) shapes such as square, rectangle, rhombus, and circle with equal areas and equal perimeters. The variation in MEA shape/size is achieved by altering gasket openings in the dynamic regions.

In the equal areas of MEA shapes, gasket opening areas of 1963.5 (+/−0.2) mm2 are used. Whereas in the equal perimeters of shapes, gasket opening perimeters of 157.1 (+/−0.2) mm are used. In this experimentation, Nickel-201 current collectors with 45.3% of circular openings are used on both the anode and cathode sides. The experiment is carried out at a 5 molar methanol concentration to find out the highest power density of the cell.

In the equal areas, among the shapes that are chosen for investigation, the square shape opening consisting of a perimeter of 177.2 mm has developed a maximum power density of 6.344 mWcm⁻² and a maximum current density of 65.2 mAcm⁻². Similarly, in equal perimeters, the rhombus shape opening with an area of 1400 mm2 has developed a maximum power density of 7.714 mWcm⁻² and a maximum current density of 85.3 mAcm⁻².

The novelty of this research work is instead of fabricating various shapes and sizes of highly expensive MEAs, the desired shapes and sizes of the MEA are achieved by altering gasket openings over dynamic regions to find out the highest power density of the cell.

Homogeneous charge compression ignition (HCCI) engine is an advanced combustion method to use alternate fuel with higher fuel economy and, reduce NOX and soot emissions. This paper aims to investigate the influence of ethanol fraction (ethanol plus gasoline) on dual fuel HCCI engine performance.

In this study, the existing CI engine is modified into dual fuel HCCI engine by attaching the carburetor to the inlet manifold for the supply of ethanol blend (E40/E60/E80/E100). The mixture of ethanol blend and the air is ignited by diesel through a fuel injector into the combustion chamber at the end of the compression stroke. The experiments are conducted for high load conditions on the engine i.e. 2.8 kW and 3.5 kW maximum output power for 1,500 constant rpm.

It is noticed from the experimental results that, with an increase of ethanol in the blends, ignition delay (ID) increases and the start of combustion is retarded. It is noticed that E100 shows the highest ID and low in-cylinder pressure; however, E40 shows the lowest ID compared to higher fractions of ethanol blends. An increase in ethanol proportion reduces NOX and smoke opacity but, HC and CO emissions increase compared to pure diesel mode engine. E100 plus diesel dual-fuel HCCI engine shows the highest brake thermal efficiency compared to remaining ethanol blends and baseline diesel engine.

This experimental study concluded that E100 plus diesel and E80 plus diesel gave optimum dual fuel HCCI engine performance for 2.8 kW and 3.5 kW rated power, respectively.

Fuel cells technologies are the most promising green energy technologies for diverse applications. One of the fastest growing areas is the portable electronic applications where the power range is the order of 1–100 W. For most of the portable electronic devices, rechargeable battery is the major energy source. Due to limitations like limited capacity, requirement of external power for recharge have led many researchers to look for alternative power sources to power portable electronic devices. The high energy density of fuel cells makes them very attractive alternative to batteries for portable power applications. There are a variety of fuel cell technologies being considered to replace batteries in portable electronic equipment. Direct Liquid Fuel Cells (DLFCs) have attracted much attention due to their potential applications as a power source for portable electronic devices. The advantages of DLFCs over hydrogen fed PEM fuel cells include a higher theoretical energy density and efficiency, a more convenient handling of the streams, and enhanced safety. Unlike batteries, fuel cells need not be recharged, merely refueled. This paper provides an overview on challenges of DLFCs (Direct Liquid Fuel Cells), like fuel crossover, cost, durability, water management, weight and size along with approaches being investigated to solve these challenges. Portable Fuel Cell Commercialization Targets for future and producers of portable fuel cells across the globe are also discussed in this paper.