Search results

PET fiber is widely used in many fields, such as clothing and decorative materials. However, the high flammability and dripping problem restrict its applications. It is vital for PET fiber to overcome these two main drawbacks for practical applications.

In this paper nacre-mimetic flame retardant coating of chitosan (CH) and Montmorillonite (MMT) was fabricated on PET fabrics through the layer-by-layer assembly method. The flame retardancy and anti-dripping performance of the treated PET fabric were investigated.

The results of limiting oxygen index (LOI) value and vertical burning test revealed the anti-dripping performance of PET fabrics which was greatly improved, while the flame retardancy has not been improved. The dripping phenomena was eliminated when the CH/MMT bilayers were over 5 BL. Thermo gravimetric analysis (TGA) results revealed that nacre-mimetic coated CH/MMT bilayers on PET fabrics would promote the char formation both under nitrogen atmosphere and under air atmosphere indicating the obviously condensed phase flame retardant action. scanning electron microscopy (SEM) images of the char residues revealed that coated PET fabrics would promote the formation of char.

However, the char was an unstable char which would further combust to change the thermal degradation and combustion process of PET fabric. Though PET fabric coated by this CH/MMT nacre-mimetic system had no flame retardancy, the anti-dripping performance was greatly improved. This research would provide experimental basis for improving the anti-dripping performance for thermoplastic materials.

This research is the original research for the flame retardant treatment by fabrication nacre-mimetic CH/MMT coating on PET fabric, which has not been reported previously. This research would provide experimental basis for improving the anti-dripping performance for thermoplastic polymer fabrics.

The purpose of this paper is to model a nacre-like composite material, consisting of tablets and polyurea tablet/tablet interfaces, B₄C. This composite material is being considered in the construction of the so-called backing-plate, a layer within a multi-functional/multi-layer armor system.

Considering the basic functions of the backing-plate (i.e. to provide structural support for the ceramic-strike-face and to stop a high-velocity projectile and the accompanying fragments) in such an armor system, the composite-material architecture is optimized with respect to simultaneously achieving high flexural stiffness and high ballistic-penetration resistance. Flexural stiffness and penetration resistance, for a given architecture of the nacre-like composite material, are assessed using a series of transient non-linear dynamics finite-element analyses. The suitability of the optimized composite material for use in backing-plate applications is then evaluated by comparing its performance against that of the rolled homogeneous armor (RHA), a common choice for the backing-plate material.

The results obtained established: a trade-off between the requirements for a high flexural stiffness and a high ballistic-penetration resistance in the nacre-like composite material; and overall superiority of the subject composite material over the RHA when used in the construction of the backing-plate within multi-functional/multi-layer armor systems.

This study extends the authors previous research on nacre-mimetic armor to optimize the architecture of the armor with respect to its flexural stiffness and ballistic-penetration resistance, so that these properties could be increased over the levels attained in the current choice (RHA) for the backing layer of multi-functional/multi-layer armor.

Cotton is one of the most common nature textile fiber that is widely used in clothing, bedding and decorative fields due to its comfort. However, the cellulosic cotton fiber has its own drawbacks. Cotton fiber belongs to flammable material with the limiting oxygen index (LOI) value about 18% that restricts its applications. Cotton fiber is easy to crease during the repeat wearing and laundering process that will influence the wearability. Therefore, it is very important to improve the flame retardancy and anticrease performance of cotton fabric.

In this study, flame retardant and anticrease multifunctional modifications of cotton fabric were conducted by one-step pad–dry–cure process using eco-friendly phytic acid and 1, 2, 3, 4-butanetetracarboxylic acid.

The results of limited oxygen index (LOI) values and vertical burning test indicate that the flame retardancy of modified cotton fabric was greatly improved. The LOI value of modified cotton fabric reached 30.8% when the usage of phytic acid was 12%. The crease recovery angle was over 250° of the modified cotton fabric revealing good anticrease performance.

This research provides a novel feasible cost-effective one-step method for the multifunctional modified cellulosic fiber using eco-friendly chemical agents.