Search results

This research studies the behavior choice of key actors in the construction supply chain and constructs a model which includes the benefit function of the government, contractors and owners, aiming at improving the coverage of green buildings.

In this paper, tripartite dynamic game is studied and simulated based on duplicate dynamic equation. The tripartite game under government intervention is rarely considered, and government punishment measures are seldom introduced into the research.

According to the simulation results, the practical insights in line with the development of green supply chain are put forward. Rewards and punishments affect the development of the supply chain. New technologies and new materials accelerate the development of green supply chain and then improve the coverage of green buildings.

This paper constructs a dynamic model based on complete information rationality, which is difficult to realize in practice, for information is incomplete and human rationality is limited.

In fact, the government has not issued a punishment document to introduce a new variable adjustment model.

This paper is devoted to prepare micro-cone structure with variable cross-section size by Stereo Lithography Appearance (SLA)-based 3D additive manufacturing technology. It is mainly focused on analyzing the forming mechanism of equipment and factors affecting the forming quality and accuracy, investigating the influence of forming process parameters on the printing quality and optimization of the printing quality. This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The µ-SLA process is optimized based on the variable cross-section micro-cone structure printing. Multi-index analysis method was used to analyze the influence of process parameters. The process parameter influencing order is determined and validated with flawless micro array structure.

After the optimization analysis of the top diameter size, the bottom diameter size and the overall height, the influence order of the printing process parameters on the quality of the micro-cone forming is: exposure time (B), print layer thickness (A) and number of vibrations (C). The optimal scheme is A1B3C1, that is, the layer thickness of 5 µm, the exposure time of 3000 ms and the vibration of 64x. At this time, the cone structure with the bottom diameter of 50 µm and the cone angle of 5° could obtain a better surface structure.

This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

This paper aims to optimize the charging schedule for battery electric buses (BEBs) to minimize the charging cost considering the time-of-use electricity price.

The BEBs charging schedule optimization problem is formulated as a mixed-integer linear programming model. The objective is to minimize the total charging cost of the BEB fleet. The charge decision of each BEB at the end of each trip is to be determined. Two types of constraints are adopted to ensure that the charging schedule meets the operational requirements of the BEB fleet and that the number of charging piles can meet the demand of the charging schedule.

This paper conducts numerical cases to validate the effect of the proposed model based on the actual timetable and charging data of a bus line. The results show that the total charge cost with the optimized charging schedule is 15.56% lower than the actual total charge cost under given conditions. The results also suggest that increasing the number of charging piles can reduce the charging cost to some extent, which can provide a reference for planning the number of charging piles.

Considering time-of-use electricity price in the BEBs charging schedule will not only reduce the operation cost of electric transit but also make the best use of electricity resources.

This paper aims to examine the impact of adverse personality traits (alexithymia, social inhibition, negative affectivity) and supervisor knowledge hiding on individual knowledge hiding. This study also explores the moderating role of positive affectivity.

Partial least squares path modeling and data collected from 518 Polish employees with higher education and extensive professional experience recruited via an Ariadna survey panel were used to test the research hypotheses.

Two dimensions of alexithymia were considered: difficulty identifying feelings (DIF) and difficulty describing feelings (DDF). DIF has a direct impact on individual hiding, whereas DDF has an indirect impact, via social inhibition. Negative affectivity is a predictor of social inhibition, which enhances knowledge hiding. Positive affectivity slightly weakens the positive and strong effect of supervisor knowledge hiding on subordinate knowledge hiding.

Because alexithymia, social inhibition and negative affectivity may predispose employees to knowledge hiding, managers should identify these personality traits among job applicants and hired employees to make appropriate employment decisions. Moreover, managers should be aware that hiding knowledge by a supervisor may be imitated by subordinates.

Based on conservation of resources theory, this study investigates previously unexplored relationships among alexithymia, social inhibition, affectivity and knowledge hiding.

This research establishes an evaluation index system and calculation method for the China's maritime power construction index (CMPCI). It has conducted practical tests on the progress of China's maritime power construction since the 12th–13th Five-Year Plans. This paper conducts a phased study on the construction of China's maritime power based on the CMPCI evaluation results; it expands the relevant achievements in the research field of quantitative research in China's maritime power construction. The verification results are consistent with the actual situation.

Fully reflect the guiding role of national marine policies in the new development stage, guide the transformation of China's marine management model. The CMPCI is a quantitative evaluation of the overall development level of China's maritime power construction over a certain period of time. The CMPCI in this article aims to comprehensively reflect the changes in the construction of China's maritime power, strives to cover various fields it encompasses. This study focuses on objective statistical data analysis, supplemented by multisource data, to objectively and fairly measure the level of CMPCI.

It fully reflects the highlights of marine science and technology, social democracy and strategic emerging industries. This research dynamically quantifies the trajectory of China's maritime power construction, synthetic reflecting the country's macroeconomic policy guiding function. Guiding the transformation of the marine resources utilization, marine economy development, marine scientific research and marine rights and interests maintenance and effectively serving the decision-making needs of the government.

The present study focused on examining the effect of treated wastewater (TWW) on soil chemical properties. Also, efforts were made to compare the soil chemical properties under TWW irrigation with that under groundwater (GW).

During the years 2021 and 2022, surface and subsurface soil samples were randomly collected in triplicate by using an auger fortnightly at two depths (20 and 40 cm) from the selected spot areas to represent the different types of irrigation water sources: TWW and GW. Samples of the GW and the TWW were collected for analysis.

This study examines the impact of TWW on soil characteristics and the surrounding environment. TWW use enhances soil organic matter, nutrient availability and salt redistribution, while reducing calcium carbonate accumulation in the topsoil. However, it negatively affects soil pH, electrical conductivity and sodium adsorption ratio, although remaining within acceptable limits. Generally, irrigating with TWW improves most soil chemical properties compared to GW.

In general, almost all of the soil’s chemical properties were improved by irrigating with TWW rather than GW. Following that, wastewater is used to irrigate the soil. Additionally, the application of gypsum to control the K/Na and Ca/Na ratios should be considered under long-term TWW and GW usage in this study area in order to control the salt accumulation as well as prevent soil conversion to saline-sodic soil in the future. However, more research is needed to thoroughly investigate the long-term effects of using TWW on soil properties as well as heavy metal accumulation in soil.

The purpose of this study is to analyze the environmental efficiency level and trend of the transportation sector in the upper–mid–downstream of the Yangtze River Economic Belt and the JingJinJi region in China and assess the effectiveness of policies for protecting the low-carbon environment.

This study uses the meta-frontier slack-based measure (SBM) approach to evaluate environmental efficiency, which targets and classifies specific regions into regional groups. First, this study employs the SBM with the undesirable outputs to construct the environmental efficiency measurement models of the four regions under the meta-frontier and group frontiers, respectively. Then, this study uses the technology gap ratio to evaluate the gap between the group frontier and the meta-frontier.

The analysis reveals several key findings: (1) the JingJinJi region and the downstream of the YEB had achieved the overall optimal production technology in transportation than the other two regions; (2) significant technology gaps in environmental efficiency were observed among these four regions in China; and (3) the downstream region of the YEB exhibited the lowest levels of energy consumption and excessive CO₂ emissions.

To evaluate the differences in environmental efficiency resulting from regions and technological gaps in transportation, this study employs the meta-frontier model, which overcomes the limitation of traditional environmental efficiency methods. Furthermore, in the practical, the study provides the advantage of observing the disparities in transportation efficiency performed by the Yangtze River Economic Belt and the Beijing–Tianjin–Hebei regions.

Renal failure is an end-stage consequence after persistent hyperglycemia during diabetic nephropathy (DN), and the etiology of DN has been linked to oxidative stress. The purpose of this research was to determine the beneficial synergistic effects of S-Allyl Cysteine (SAC) and Taurine (TAU) on oxidative damage in the kidneys of type 2 diabetic rats induced by hyperglycemia.

Experimental diabetes was developed by administering intraperitoneal single dose of streptozotocin (STZ; 65 mg/kg) with nicotinamide (NA; 230 mg/kg) in adult rats. Diabetic and control rats were treated with SAC (150 mg/kg), TAU (200 mg/kg) or SAC and TAU combination (75 + 100 mg/kg) for four weeks. The estimation of body weight, fasting blood glucose (FBG), oral glucose tolerance test (OGTT), oxidative stress markers along with kidney histopathology was done to investigate the antidiabetic potential of SAC/TAU in the NA/STZ diabetic group.

The following results were obtained for the therapeutic efficacy of SAC/TAU: decrease in blood glucose level, decreased level of thiobarbituric acid reactive substances (TBARS) and increased levels of GSH, glutathione-s-transferase (GST) and catalase (CAT). SAC/TAU significantly modulated diabetes-induced histological changes in the kidney of rats.

SAC/TAU combination therapy modulated the oxidative stress markers in the kidney in diabetic rat model and also prevented oxidative damage as observed through histopathological findings.

This paper explores international trade of the Chinese manufacturing industries through the lenses of network analysis (NA) to visualise the world trade network of the Chinese economy, describe its topology and better explain the international organisation of Chinese manufacturing industries.

The authors built a dataset of 40,550 Chinese companies and their 107,026 subsidiaries in 118 countries from Orbis-BVD and used a NA to investigate the connection between China and other countries. In particular, the authors studied the connections between Chinese companies and their subsidiaries in order to build a network of Chinese industries.

The authors found that the network of Chinese companies is ramified but not wide and it can be divided into two clusters. Moreover, the relations between China and other peripheral countries are strongly mediated by a few leading locations (e.g. Hong Kong and the USA).

This paper contributes to the literature in several ways. First, the authors provide empirical evidence on the magnitude and ramifications of Chinese enterprises in the world. The existing studies generally focus on applying NA to sectoral insights (Mao and Yang, 2012; Shaikh et al., 2016; Zheng et al., 2016; Wanzenbö ck, 2018; Krichene et al., 2019), whereas in this work the authors take a comprehensive view of the entire Chinese manufacturing system. Second, this paper complements the existing literature identifying the difference between cluster levels in Chinese manufacturing (Wu and Jiang, 2011) by proposing a cluster centralisation method to analyse the international network of Chinese firms rather than just the national network. Finally, the results also shed light on the international trade relationship between China, Hong Kong and the USA.

Health risks associated with coronavirus disease 2019 (COVID-19) have severely affected the financial stability of airline companies globally. Recapturing financial stability following this crisis depends heavily on these companies’ ability to attain efficient and productive operations. This study uses several empirical approaches to examine key factors contributing to carriers sustaining high productivity prior to, during and after a major recession. Findings suggest, regardless of economic conditions, that social distancing which requires airline companies in the Asia Pacific region to fly with a significant percentage of unfilled seats weakens the performance of those companies. Furthermore, efficient operations do not guarantee the avoidance of productivity declines, especially during a recession.