Search results

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming and powder metallurgy are briefly discussed. The range of applications of finite elements on the subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for the last five years, and more than 1100 references are listed.

This paper gives a review of the finite element techniques (FE) applied in the area of material processing. The latest trends in metal forming, non‐metal forming, powder metallurgy and composite material processing are briefly discussed. The range of applications of finite elements on these subjects is extremely wide and cannot be presented in a single paper; therefore the aim of the paper is to give FE researchers/users only an encyclopaedic view of the different possibilities that exist today in the various fields mentioned above. An appendix included at the end of the paper presents a bibliography on finite element applications in material processing for 1994‐1996, where 1,370 references are listed. This bibliography is an updating of the paper written by Brannberg and Mackerle which has been published in Engineering Computations, Vol. 11 No. 5, 1994, pp. 413‐55.

Argues that the dynamic‐explicit approach has in recent years been successfully applied to the solution of various quasi‐static, elastic‐plastic problems, especially in the metal forming area. A condition for the success has, however, been that the problems have been displacement‐driven. The solution of similar force‐driven problems, using this approach, has been shown to be much more complicated and computationally time consuming because of the difficulties in controlling the unphysical dynamic forces. Describes a project aiming to develop a methodology by which a force‐driven problem can be analysed with similar computational effort as a corresponding displacement‐driven one. To this end an adaptive loading procedure has been developed, in which the loading rate is controlled by a prescribed velocity norm. Presents several examples in order to exhibit the merits of the proposed procedure.

To provide a selective bibliography for researchers working with bulk material forming (specifically the forging, rolling, extrusion and drawing processes) with sources which can help them to be up‐to‐date.

A range of published (1996‐2005) works, which aims to provide theoretical as well as practical information on the material processing namely bulk material forming. Bulk deformation processes used in practice change the shape of the workpiece by plastic deformations under forces applied by tools and dies.

Provides information about each source, indicating what can be found there. Listed references contain journal papers, conference proceedings and theses/dissertations on the subject.

It is an exhaustive list of papers (1,693 references are listed) but some papers may be omitted. The emphasis is to present papers written in English language. Sheet material forming processes are not included.

A very useful source of information for theoretical and practical researchers in computational material forming as well as in academia or for those who have recently obtained a position in this field.

There are not many bibliographies published in this field of engineering. This paper offers help to experts and individuals interested in computational analyses and simulations of material forming processes.

Sheet metal forming is a process of shaping thin sheets of metal by applying pressure through male or female dies or both. In most of used sheet‐formating processes the metal is subjected to primarily tensile or compressive stresses or both. During the last three decades considerable advances have been made in the applications of numerical techniques, especially the finite element methods, to analyze physical phenomena in the field of structural, solid and fluid mechanics as well as to simulate various processes in engineering. These methods are useful because one can use them to find out facts or study the processes in a way that no other tool can accomplish. Finite element methods applied to sheet metal forming are the subjects of this paper. The reason for writing this bibliography is to save time for readers looking for information dealing with sheet metal forming, not having an access to large databases or willingness to spend own time with uncertain information retrieval. This paper is organized into two parts. In the first one, each topic is handled and current trends in the application of finite element techniques are briefly mentioned. The second part, an Appendix, lists papers published in the open literature. More than 900 references to papers, conference proceedings and theses/dissertations dealing with subjects that were published in 1995‐2003 are listed.

Two mesh refinement indicators based on the gradients of effective stress (GSIG) and effective plastic strain (GEPS), respectively, are proposed for adaptive finite element analysis of the large deformation, quasi‐static or dynamic response of shell structures. The mesh refinement indicators are based on equi‐distributing the variation of stresses or plastic strains over the elements of the mesh. A program module is developed and implemented in the non‐linear explicit finite element code LS‐DYNA. This module provides element‐wise refinement evaluations so that selective mesh refinements are carried out in regions of the mesh where the values of local indicators exceed a user‐specified tolerance. The FE model of a conventional deep drawing process is used as a numerical model, including both material and geometrical non‐linearities, in order to demonstrate the versatility of the two refinement indicators. Four different refinement indicators, based on angle change, thickness change, GSIG and GEPS, are applied in this investigation. The numerical results are compared with experimental results regarding the thickness distribution versus cup height, cup height variation versus circumference angle, effective plastic strain in the deformed sheet and punch force. It is shown that the proposed indicators can identify finite elements which have high gradients of effective stress or effective plastic strain so that the mesh is refined in the regions undergoing the most severe deformations and the numerical results are improved.

Floorball is a Swedish sports innovation which emerged and started to be played about 40 years ago. The purpose of this paper is to explore value capturing in this relatively new sport and the various contributions made by different actors towards market development of the sport.

The research utilizes a theoretical framework of value capturing in professional team sports for research. The analysis is based upon 13 semi-structured interviews with representatives from three groups, “players/coaches,” “board members and “manufacturers/retailers.”

All economic actors within the research framework contribute to various extents to the market development of the sport, yet they all need to cooperate, exemplifying that innovation for market development and value for the sport can only be co-created.

The sample is taken from the Swedish market and may, thus, be considered biased.

All economic actors within the research framework contribute to market development of the sport to various degrees, yet they all need to cooperate, exemplifying that innovation for market development and value for the sport can only be co-created.

This paper provides unique insights into the development of floorball as a “new” sport.