Search results

The purpose of this paper is to examine the initial mixing of wastewater discharged from submerged outfall diffusers and the influence of port configurations on wastewater distribution based on computational results.

Marine wastewater discharges from multiport diffusers are investigated by numerically solving three-dimensional and uncompressible two-phase flow fields. A mixture model simulates this flow and the standard k-e model to resolve flow turbulence; inter-phase interactions were described in terms of relative slip velocity between phases. Computations were performed for two values of the port spacings s/H with different current Froude numbers F.

Computational results compared well with previous laboratory measurements. Numerical results reveal that for both the closely spaced (s/H=0.21) and widely spaced (s/H=3.0) ports, the normalized dilution Sn becomes independent of F; further, the length of the near field xn and the spreading layer thickness hn are functions of F. For the closely spaced ports, the wastewater discharge behaves like a line plume, the Coanda effect is obvious, quasi-bifurcation is present, horseshoe structures of the jets in the planes are rapidly produced and then squashed and elongated, and the jet trajectories based on maximum velocity precede those based on maximum concentration. For the widely spaced ports, the wastewater discharge behaves like a point plume, the Coanda effect is not obvious, bifurcation is present, horseshoe structures of the jets in the planes are gradually produced and become ellipses, and the jet trajectories based on maximum velocity are similar to those based on maximum concentration.

Semi-empirical equations are presented to predict major near field characteristics. These provide guidance for designing multiport diffusers and assessing environmental impact.

This paper aims to emphasize on studying various geometrical modification performed in wavy and raccoon microchannel by manipulating parameters, i.e. waviness (γ), expansion factor (α), wall to fluid thermal conductivity ratio (k_sf), substrate thickness to channel height ratio (d_sf) and Reynolds number (Re) for obtaining optimum parameter(s) that leads to higher heat dissipation rate.

A three-dimensional solid-fluid conjugate heat transfer numerical model is designed to capture flow characteristics and heat transfer in single-phase laminar flow microchannels. The governing equations are solved using finite volume method.

The results are presented in terms of average base temperature, average Nusselt number, pressure drop, dimensionless local heat flux, dimensionless wall and bulk fluid temperature, local Nusselt number and performance factor including axial conduction number. Heat dissipation rate with raccoon microchannel configuration is found to be higher compared to straight and wavy microchannel. With waviness of γ = 0.167, and 0.267 in wavy and raccoon microchannel, respectively, performance factor attains maximum value compared to other waviness for all values of Reynolds number. It is also found that the effect of axial wall conduction in wavy and raccoon microchannel is negligible. Additionally, thermal performance of wavy and raccoon microchannel is compared with straight microchannel.

In recent past years, much complex design of microchannel has been proposed for heat transfer enhancement, but the feasibility of available manufacturing techniques to fabricate complex geometries is still questionable. However, fabrication of wavy and raccoon microchannel is easy, and their heat dissipation capability is higher.

This makes the difference in wall and bulk fluid temperature smaller. Thus, present work highlighted the dominance of axial wall conduction on thermal and hydrodynamic performance of wavy and raccoon microchannel under conjugate heat transfer situation.