Search results

The purpose of this paper is to perform an analytical study of non-linear elastic delamination fracture in the multilayered functionally graded split cantilever beam (SCB) configuration. The SCB studied may have an arbitrary number of vertical layers. The material in each layer is functionally graded along the layer thickness. Also, the material properties may be different in each layer. The analytical solution derived was applied for parametric investigations in order to evaluate the effects of material properties and delamination crack location on the non-linear fracture behaviour.

The delamination fracture was studied in terms of the strain energy release rate. The SCB mechanical response was described by using a power-law stress-strain relation. A non-linear analytical solution for the strain energy release rate was derived by considering the SCB complementary strain energy. In order to verify the solution, an additional analysis of the strain energy release rate was developed by considering the complementary strain energy in the beam cross-sections ahead and behind the crack front.

The effects of material gradient, crack location along the beam width and non-linear material behaviour on the delamination fracture were evaluated. The analytical solution derived is useful for parametric studies of non-linear fracture in multilayered functionally graded beams.

Delamination fracture in the multilayered functionally graded SCB configuration was analysed with considering the non-linear material behaviour.

A delamination fracture analysis of two-dimensional functionally graded multilayered end-loaded split beam configuration with non-linear mechanical behaviour of material is conducted. The beam is made of an arbitrary number of longitudinal layers. Perfect adhesion between layers is assumed. The material is two-dimensional functionally graded in the cross-section of each layer. Also, each layer has individual thickness and material properties. A delamination crack is located arbitrary along the beam height. The paper aims to discuss these issues.

The delamination fracture behaviour is investigated analytically in terms of the strain energy release rate by analysing the balance of the energy. An additional analysis of the delamination fracture is performed by applying the J-integral approach for verification.

The solutions derived are used to evaluate the effects of crack location, material gradients and material non-linearity on the delamination fracture behaviour of end-loaded split beam. The effect of material gradient on the distribution of the J-integral value along the crack front is elucidated too.

Delamination in the multilayered functionally graded end-loaded split beam exhibiting non-linear mechanical behaviour of the material is analysed assuming that the material property is distributed non-linearly in both thickness and width directions in each layer.

This paper aims to analyze the elastic-plastic delamination fracture behaviour of multilayered functionally graded four-point bending beam configuration.

The mechanical response of beam is described by a power-law stress-strain relation. The fracture is studied analytically in terms of the strain energy release rate by considering the beam complimentary strain energy. The beam can have an arbitrary number of layers. Besides, each layer may have different thickness and material properties. Also, in each layer, the material is functionally graded along the beam width. A delamination crack is located arbitrary between layers. Thus, the crack arms have different thickness.

The analysis developed is used to elucidate the effects of crack location, material gradient and non-linear behaviour of material on the delamination fracture. It is found that the material non-linearity leads to increase in the strain energy release rate. Therefore, the non-linear behaviour of material should be taken into account in fracture mechanics-based safety design of structural members and components made of multilayered functionally graded materials. The analysis revealed that the strain energy release rate can be effectively regulated by using appropriate material gradients in the design stage of multilayered functionally graded constructions.

Delamination fracture behaviour of multilayered functionally graded four-point bending beam configuration is studied in terms of the strain energy release rate by taking into account the material non-linearity.

The purpose of this paper is to present an analytical study of the delamination fracture behaviour of a multilayered two-dimensional functionally graded cantilever beam configuration. A delamination crack is located arbitrary along the height of the beam cross-section. The layers have different thicknesses and material properties. Perfect adhesion is assumed between layers. The material is functionally graded in both thickness and width directions in each layer. Besides, the material of the beam exhibits non-linear-elastic behaviour.

The delamination fracture behaviour is analysed in terms of the strain energy release rate. The J-integral approach is applied in order to verify the analysis of the strain energy release rate developed in the present paper.

The influence of material properties, the crack location along the height of the beam cross-section and the non-linear behaviour of the material on the delamination fracture is examined.

A non-linear delamination fracture analysis of multilayered two-dimensional non-symmetric functionally graded beam configuration is developed.

The purpose of this paper is to develop an analysis of longitudinal fracture behaviour of a functionally graded non-linear-elastic circular shaft loaded in torsion. It is assumed that the material is functionally graded in both radial and longitudinal directions of the shaft (i.e. the material is bi-directional functionally graded).

The Ramberg–Osgood stress-strain relation is used to describe the non-linear mechanical behaviour of the functionally graded material. The fracture is studied in terms of the strain energy release rate by analysing the balance of the energy. The strain energy release rate is obtained also by differentiating of the complementary strain energy with respect to the crack area for verification.

Parametric studies are carried out in order to evaluate the influence of material gradients in radial and longitudinal directions, the crack location in radial direction and the crack length on the fracture behaviour of the shaft. It is found that by using appropriate gradients in radial and longitudinal directions, one can tailor the variations of material properties in order to improve the fracture performance of the non-linear-elastic circular shafts to the externally applied torsion moments.

A longitudinal cylindrical crack in a bi-directional functionally graded non-linear-elastic circular shaft loaded in torsion is analysed by using the Ramberg–Osgood stress-strain relation.

This paper is concerned with analysis of the time-dependent strain energy release rate for a longitudinal crack in a beam subjected to linear relaxation. A viscoelastic model with an arbitrary number of parallel units is used for treating the relaxation. Each unit has one dashpot and two springs. A stress-strain-time relationship is derived for the case when the coefficient of viscosity in each unit of the viscoelastic model changes continuously with time. The beam exhibits continuous material inhomogeneity along the thickness. Thus, the moduli of elasticity and the coefficients of viscosity vary continuously in the thickness direction. The aim of the present paper is to obtain time-dependent solutions to the strain energy release rate that take into account the relaxation when the coefficient of viscosity changes with time.

Time-dependent solutions to the strain energy release rate are derived by considering the time-dependent strain energy and also by using the compliance method. The two solutions produce identical results.

The variation of the strain energy release rate with time due to the relaxation is analysed. The influence of material inhomogeneity and the crack location along the beam width on the strain energy release rate are evaluated. The effects of change of the coefficients of viscosity with time and the number of units in the viscoelastic model on the strain energy release rate are assessed by applying the solutions derived.

The time-dependent strain energy release rate for a longitudinal vertical crack in a beam under relaxation is analysed for the case when the coefficients of viscosity change with time.

This study aims to construct a mathematical model to study the dispersion analysis of magneto-electro elastic plate of arbitrary cross sections immersed in fluid by using the Fourier expansion collocation method (FECM).

The analytical formulation of the problem is designed and developed using three-dimensional linear elasticity theories. As the inner and outer boundaries of the arbitrary cross-sectional plate are irregular, the frequency equations are obtained from the arbitrary cross-sectional boundary conditions by using FECM. The roots of the frequency equation are obtained using the secant method, which is applicable for complex solutions.

The computed physical quantities such as radial stress, hoop strain, non-dimensional frequency, magnetic potential and electric potential are plotted in the form of dispersion curves, and their characteristics are discussed. To study the convergence, the non-dimensional wave numbers of longitudinal modes of arbitrary (elliptic and cardioid) cross-sectional plates are obtained using FECM and finite element method and are presented in a tabular form. This result can be applied for optimum design of composite plates with arbitrary cross sections.

This paper contributes the analytical model for the role of arbitrary cross-sectional boundary conditions and impact of fluid loading on the dispersion analysis of magneto-electro elastic plate. From the graphical patterns of the structure, the effects of stress, strain, magnetic, electric potential and the surrounding fluid on the various considered wave characteristics are more significant and dominant in the cardioid cross sections. Also, the aspect ratio (a/b) and the geometry parameters of elliptic and cardioids cross sections are significant to the industry or other fields that require more flexibility in design of materials with arbitrary cross sections.

This paper gives a bibliographical review of the finite element methods (FEMs) applied to the analysis of ceramics and glass materials. The bibliography at the end of the paper contains references to papers, conference proceedings and theses/dissertations on the subject that were published between 1977‐1998. The following topics are included: ceramics – material and mechanical properties in general, ceramic coatings and joining problems, ceramic composites, ferrites, piezoceramics, ceramic tools and machining, material processing simulations, fracture mechanics and damage, applications of ceramic/composites in engineering; glass – material and mechanical properties in general, glass fiber composites, material processing simulations, fracture mechanics and damage, and applications of glasses in engineering.

The purpose of this paper is to carry out a delamination fracture analysis of the three-dimensional functionally graded split cantilever beam (SCB) configuration.

The fracture behaviour was studied analytically in terms of the strain energy release rate by applying methods of linear elastic fracture mechanics. It was assumed that the material is functionally graded along the beam width, height and length. The strain energy release rate was derived by analysing the stress and strain state in the beam cross-sections ahead and behind the crack front. An additional analysis of the strain energy release rate was performed by considering the beam strain energy for verification.

The influence of material gradient along the beam width, height and length on the delamination fracture behaviour was investigated. The effect of crack length was analysed too. The analytical approach developed is very useful for parametric fracture investigations. The results obtained in the present study can be applied for optimisation of three-dimensional functionally graded beam systems in their design with respect to delamination fracture behaviour.

An analytical approach for studying the delamination fracture in the SCB configuration that is functionally graded along the beam width, height and length was developed.

The purpose of this study was to introduce three-dimensional printing (3DP) of functionally graded sandwich foams (FGSFs). This work was continued by predicting the mechanical buckling and free vibration behavior of 3DP FGSFs using experimental and numerical analyses.

Initially, hollow glass microballoon-reinforced high-density polyethylene-based polymer composite foams were developed, and these materials were extruded into their respective filaments. These filaments are used as feedstock materials in fused filament fabrication based 3DP for the development of FGSFs. Scanning electron microscopy analysis was performed on the freeze-dried samples to observe filler sustainability. Furthermore, the density, critical buckling load (P_cr), natural frequency (f_n) and damping factor of FGSFs were evaluated. The critical buckling load (P_cr) of the FGSFs was estimated using the double-tangent method and modified Budiansky criteria.

The density of FGSFs decreased with increasing filler percentage. The mechanical buckling load increased with the filler percentage. The natural frequency corresponding to the first mode of the FGSFs exhibited a decreasing trend with an increasing load in the pre-buckling regime and an increase in post-buckled zone, whereas the damping factor exhibited the opposite trend.

The current research work is valuable for the area of 3D printing by developing the functionally graded foam based sandwich beams. Furthermore, it intended to present the buckling behavior of 3D printed FGSFs, variation of frequency and damping factor corresponding to first three modes with increase in load.