Search results

Material-jetting (MJ) three-dimensional (3D) printing processes are competitive due to their printing resolution and printing speed. Driving waveform design of piezoelectric printhead in MJ would affect droplet formation and performance, but there are very limited studies on it besides patents and know-hows by commercial manufacturers. Therefore, in this research, the waveform design process to efficiently attain suitable parameters for a multi-nozzle piezoelectric printhead was studied. Therefore, this research aims to study the waveform design process to efficiently attain suitable parameters for a multi-nozzle piezoelectric printhead.

Ricoh’s Gen4L printhead was adopted. A high-speed camera captured pictures of jetted droplets and droplet velocity was calculated. The waveforms included single-, double- and triple-pulse trapezoidal patterns. The effects of parameters were investigated and the suitable ones were determined based on the avoidance of satellite drops and preference of higher droplet velocity.

In a single-pulse waveform, an increase of fill time (Tf) decreased the droplet velocity. The maximum velocity happened at the same pulse width, the sum of fill time and hold time (Tf + Th). In double- and triple-pulse, a voltage difference (Vd) above zero in the holding stage was adopted except the last pulse to avoid satellite drops. Suitable parameters for the selected resin were obtained and the time-saving design process was established.

Based on the effects of parameters and observed data trends, suggested procedures to determine suitable parameters were proposed with fewer experiments.

This study has verified the feasibility of suggested design procedures on another resin. The required number of trials was reduced significantly.

This research investigated the process of driving waveform design for the multi-nozzle piezoelectric printhead. The suggested procedures of finding suitable waveform parameters can reduce experimental trials and will be applicable to other MJ 3D printers when new materials are introduced.

This study aims to investigate the influence of commercially available resins in water-based magenta pigment inkjet ink formulations on the properties of ink printability and the characteristics of ink application in food packaging. The impact of the resin on the jettability of the existing printability phase diagrams was also assessed.

Inks with different resin loadings were tested for selected properties, such as viscosity, particle size and surface tension. Stability was determined using a Turbiscan AGS turbidimeter and LumiFuge photocentrifuge analyzer. The ink layer fastness against abrasion and foodstuffs was evaluated using an Ugra device and according to PN-EN 646, respectively. JetXpert was used to assess Ricoh printhead jetting performance.

Printability diagrams successfully characterized the jettability of polyurethane inkjet inks on a multi-nozzle printhead and the binder improved droplet formation and printing precision.

Magenta water-based inkjet inks with commercial resins have been developed for printing on paper substrates. To the best of the authors’ knowledge, for the first time, inkjet ink stability was evaluated using the Turbiscan AGS and LumiFuge analyzers, and jettability models were verified using an industrial multi-nozzle printhead.

The material-jetting-type (MJ) 3-D printing technology has advantages in resolution and color printing. During the printing process, a leveling technique is needed to precisely control the thickness and flatness of each layer. Roller-type leveling mechanism has been adopted in commercial MJ 3-D printers, but it is lack of research on roller leveling process parameters and establishing experimental procedures. Therefore, in this study, a roller-type leveling mechanism for a MJ color 3 D printer was developed, and experimental approaches were utilized to determine process parameters.

The roller-type leveling mechanism was chosen to provide functions of flattening and removal of excess material. The parameters studied were roller speed and rotational direction. Surface roughness, Ra, of printed single-layered specimens was measured at 15 locations for plane roughness and along five lines for line roughness to evaluate the leveling results. Adopting suitable parameters, color samples with and without leveling were printed for comparison and verification.

According to plane roughness results, forward rotation achieved better leveling. Plane roughness was the major criteria to determine roller speed with the assistance of standard deviation of line roughness. The best parameters of the self-developed MJ color 3-D printer were found to be rolling forward at 1,100 rpm. In addition, printed color samples showed great improvement in surface roughness with leveling and no obvious color mixing after leveling.

Leveling is important to achieve desired layer thickness, smooth surface and good color quality in color 3-D printing. For MJ 3-D printing, only patents were revealed regarding roller design, but paper publications have not been presented. This research practically proposed to use experimental approach to understand the effects of roller operating parameters and to find the suitable ones based on surface roughness results.

This research established the experimental procedures and also suggested guidelines of experimentally obtaining suitable roller leveling process parameters. Developers can refer to this study results to design and adjust leveling mechanism in a new MJ 3-D printer.

The experimental approach can be applied to similar MJ 3-D printing systems if different materials are introduced or the platform speed is changed. The observed trends suggested several guidelines to plan limited experiments only to obtain suitable roller process parameters.

This paper aims to study drop formation in piezoelectric industrial printheads during the inkjet printing processes. It presents how the piezoelectric printhead forms drops of nanoparticle ink and how the problems with different values of drop parameters may influence the printed pattern’ defects and quality.

A piezoelectric printhead with 128 nozzles was activated to operate in a controlled manner, and the droplets ejected from the nozzles were observed during falling and analysed in the printview system. The effect of varying the values of drop parameters on print quality and pattern defects has been analysed and discussed.

The obtained results allow the identification of the sources of the technological problems in obtaining repeatable performance drops with the desired properties, and indicate the importance of choosing the appropriate individually chosen strategy of controlling the printing for each individual application to get good-quality and free-from-defects patterns.

Because of the chosen research method (arbitrary selected printhead type and ink manufacturer), this study could have limited universality. Authors encourage the study of other kinds of piezoelectric heads or other conductive inks.

This study includes practically useful applications for users to improve the inkjet print quality.

This study presents results of original empirical research works on problems of the drops forming in the inkjet printing process, and finally, it identifies problems that must be resolved to disseminate this technology.

This paper aims to present a multi-material additive manufacturing (AM) process with a newly developed curing-on-demand method to fabricate a three-dimensional (3D) object with multiple material compositions.

Unlike the deposition-on-demand printing method, the proposed curing-on-demand printheads use a digital light processing (DLP) projector to selectively cure a thin layer of liquid photocurable resin and then clean the residual uncured material effectively using a vacuuming and post-curing device. Each printhead can individually fabricate one type of material using digitally controlled mask image patterns. The proposed AM process can accurately deposit multiple materials in each layer by combining multiple curing-on-demand printheads together. Consequently, a three-dimensional object can be fabricated layer-by-layer using the developed curing-on-demand printing method.

Effective cleaning of uncured resin is realized with reduced coated resin whose height is in the sub-millimeter level and improved vacuum cleaning performance with the uncleaned resin less than 10 µm thick. Also, fast material swapping is achieved using the compact design of multiple printheads.

The proposed multi-material stereolithography (SL) process enables 3D printing components using more viscous materials and can achieve desired manufacturing characteristics, including high feature resolution, fast fabrication speed and low machine cost.

This paper aims to provide a review of four-dimensional (4D) printing of shape memory polymers using inkjet printing technology. 4D printing refers to the three-dimensional (3D) printing of smart materials capable of shape change or function modification with respect to time when activated by external stimuli. Inkjet printing has gained popularity because of the technical advantages such as non-contact deposition, multi-material printing, high resolution, high speed of printing and minimal post processing. This review will serve as a platform for understanding the inkjet 4D printing process and the shape memory capability of the polymer structures printed using inkjet printing.

The approach used in this review was to search for and review research works related to inkjet 4D printing of shape memory polymers. The search period was limited for the duration 2013 to 2021 as the 4D printing technology came into light later in 2013. With the review of inkjet 4D printing of shape memory polymers, the shape memory capability of the inkjet-printed structures were also studied.

With the available research documents, it was found that the inkjet 4D printing technology gained momentum from 2016, three years after the introduction of the 4D printing technology. The key findings of this review show that inkjet 4D printing of shape memory polymers were primarily performed using commercial inkjet printers and polymer inks linked to the printers. Even though the inkjet printing technology is matured enough to print multiple materials, development of shape memory polymer inks for inkjet printability remains complex. To realize the full potential of inkjet 4D printing, novel polymer inks specific for inkjet printing needs development.

The major limitation to this review was the availability of research papers for review. Even though inkjet printing technology has grown to popularity in the graphics printing and publishing industry since its inception in the 19th century, the technology still needs to evolve in the printing of 3D structures due to the limitations in synthesizing inks that are inkjet printable. However, this research will serve as a platform for understating the current status of inkjet 4D printing and the limitations of the technology.

This review focuses only on the inkjet 4D printing of shape memory polymers among the generally summarized 4D printing review papers available. Currently, 4D printing of shape memory polymers is carried out using only the commercially available polymer printers. Also, researchers do not have the flexibility of modifying the polymer inks linked to the printers. This review can spur more research into the development of novel polymer inks specific for inkjet printing.

The purpose of this paper is to review the current status of additive manufacturing (AM) used for tissue engineering (TE) scaffold. AM processes are identified as an effective method for fabricating geometrically complex objects directly from computer models or three-dimensional digital representations. The use of AM technologies in the field of TE has grown rapidly in the past 10 years.

The processes, materials, precision, applications of different AM technologies and their modified versions used for TE scaffold are presented. Additionally, future directions of AM used for TE scaffold are also discussed.

There are two principal routes for the fabrication of scaffolds by AM: direct and indirect routes. According to the working principle, the AM technologies used for TE scaffold can be generally classified into: laser-based; nozzle-based; and hybrid. Although a number of materials and fabrication techniques have been developed, each AM technique is a process based on the unique property of the raw materials applied. The fabrication of TE scaffolds faces a variety of challenges, such as expanding the range of materials, improving precision and adapting to complex scaffold structures.

This review presents the latest research regarding AM used for TE scaffold. The information available in this paper helps researchers, scholars and graduate students to get a quick overview on the recent research of AM used for TE scaffold and identify new research directions for AM in TE.

This paper aims to encompass the technological advancements in the area of flexible sensing electronics fabrication particularly for wearable device development applications. In the recent past, it is evident that there is a tremendous growth in the field of flexible electronics and sensors fabrication technologies all around the world. Even though, there is a significant amount of research has been carried in the past decade, but still there is a huge need for exploring novel materials for low temperature processing, optimized printing methods and customized printing devices with accurate feature control.

The author has done an extensive literature survey in the proposed area and found that the researchers are showing significant interest in exploring novel materials, new conductive ink processing methods suitable for additive manufacturing, and fabrication technologies for developing the plastic substrate-based flexible electronics for the on growing demands of wearable devices in the market.

The author has consolidated some of the recent advancements in the area of flexible sensing electronics using the inkjet-printing platform carried out by the researchers. The novel customized inkjet-printing technology, materials selections for device development, compatibility of the materials for the inkjet-printing process and the interesting results of the devices fabricated are highlighted in this paper.

The author has reported the novel inkjet-printing platforms explored by researchers in the recent past for various applications which primarily includes gas sensing. The author has consolidated in a crisp manner about the technology, materials compatible for inkjet-printing, and the exciting results of the printed devices. The author has reported the advantages and challenges of the proposed methods by the researchers. This work will bridge the technical gap in the inkjet-printing technology and will be useful for the researchers to take forward the research work on this domain to the next level.

In the past decade, three-dimensional (3D) printing has gained attention in areas such as medicine, engineering, manufacturing art and most recently in education. In biomedical, the development of a wide range of biomaterials has catalysed the considerable role of 3D printing (3DP), where it functions as synthetic frameworks in the form of scaffolds, constructs or matrices. The purpose of this paper is to present the state-of-the-art literature coverage of 3DP applications in tissue engineering (such as customized scaffoldings and organs, and regenerative medicine).

This review focusses on various 3DP techniques and biomaterials for tissue engineering (TE) applications. The literature reviewed in the manuscript has been collected from various journal search engines including Google Scholar, Research Gate, Academia, PubMed, Scopus, EMBASE, Cochrane Library and Web of Science. The keywords that have been selected for the searches were 3 D printing, tissue engineering, scaffoldings, organs, regenerative medicine, biomaterials, standards, applications and future directions. Further, the sub-classifications of the keyword, wherever possible, have been used as sectioned/sub-sectioned in the manuscript.

3DP techniques have many applications in biomedical and TE (B-TE), as covered in the literature. Customized structures for B-TE applications are easy and cost-effective to manufacture through 3DP, whereas on many occasions, conventional technologies generally become incompatible. For this, this new class of manufacturing must be explored to further capabilities for many potential applications.

This review paper presents a comprehensive study of the various types of 3DP technologies in the light of their possible B-TE application as well as provides a future roadmap.