Search results

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.

This paper uses the complex proportionality assessment (COPRAS) method to examine the driving factors of Industry 4.0 (I4) technologies for lean implementation in small and medium-sized enterprises (SMEs).

Adopting I4 technology is imperative for SMEs seeking to maintain competitiveness within the manufacturing sector. A thorough understanding of the driving factors involved is required to support the implementation of I4. For this objective, the multi-criteria decision-making (MCDM) tool COPRAS was used to efficiently analyze and rank these driving elements based on their importance. These factors can help small and medium-sized firms (SMEs) prioritize their efforts and investments in I4 technologies for lean implementation.

This study evaluates and prioritizes the nine I4 factors according to the perceptions of SMEs. The ranking offers significant insights into the factors SMEs consider more accessible and effective when adopting I4 technologies.

The author's original contribution is to examine I4 driving factors for lean implementation in SMEs using COPRAS.

The automotive industry appears to overcome much of its obstacles, despite the constant struggle facing COVID-19. The pandemic has resulted in significant improvements in the habits and conduct of consumers. There is an increased preference for personal mobility. In this dynamic environment with unexpected changes and high market rivalry, automotive supply chains focus more on executing responsive strategies with minimum costs. This paper aims to identify and model the drivers to the responsiveness of automotive supply chain.

Seventeen drivers for supply chain responsiveness have been identified from the extensive literature, expert interview. An integrated methodology of fuzzy decision-making trial and evaluation laboratory–interpretive structural modelling (DEMATEL–ISM) is developed to establish the interrelationship between the drivers. The cause–effect relationship between the drivers was obtained through fuzzy DEMATEL technique, and a hierarchical structure of the drivers was developed using the ISM technique.

The result of the integrated methodology revealed that strategic decision-making of management, accurate forecasting of demand, advanced manufacturing system in the organisation and data integration tools are the critical drivers.

This study has conceptual and analytical limitations. In this study, a limited number of drivers are examined for supply chain responsiveness. Further research may examine the role of other key performance indicators in the broad field of responsiveness in the automotive supply chain or other industry sectors. Future study can uncover the interrelationships and relative relevance of indicators using advanced multi-criteria decision-making methodologies.

The authors proposed an integrated methodology that will be benefitted to the supply chain practitioners and automotive manufacturers to develop management strategies to improve responsiveness. This study further helps to compare the responsiveness of the supply chain between various automotive manufacturers.

Education 4.0 (E 4.0) represents a new paradigm in the field of education, which emphasizes a student-centric approach that allows learners to access education anytime, anywhere, tailored to their individual needs through modern-day technologies. The purpose of the study was to unearth the critical success factors (CSFs) essential for the successful implementation of E 4.0.

The CSFs were unearthed using a literature review and further the interrelationships were analysed using multi-criteria decision making (MCDM) approach.

The study unearthed 15 CSFs for the successful implementation of E 4.0. The most important factor for the successful implementation of E 4.0 was personalized learning which was found to be the casual factor. The other causal CSFs were clear vision and leadership for E 4.0, stakeholder involvement, data analytics in teaching and learning, inter-disciplinary learning and blended learning environments. The effect factors were digital citizenship-based education, teacher training and development for E 4.0, supportive environment, curriculum redesign for E 4.0, open educational resources, digital technologies, formative assessments, infrastructure for E 4.0 and sustainability in education.

This is the first study which unearthed the CSFs and found the interrelationships among them, thus contributing to the theory of technology organization environment.

This study represented a pioneering effort in understanding the CSFs underpinning the successful adoption of E 4.0, paving the way for a more personalized, tech-savvy and effective education system.

Since conducting agile strategies provides sustainable passenger satisfaction and revenue by replacing applied policies with more profitable ones rapidly, the focus of this study is to evaluate agile attributes for managing low-cost carriers (LCCs) operations by means of resources and competences based on dynamic capabilities built on resource-based view (RBV) theory and to achieve sustainable competitive advantage in a volatile and dynamic air transport environment. LCCs in Turkey are also evaluated in this study since the competition among LCCs is high to gain market share and they can adapt quickly to all kinds of circumstances.

Two well-known Multi-Criteria Decision-Making Methods (MCDM) named as the Stepwise Weight Assessment Ratio Analysis (SWARA) and multi-attributive border approximation area comparison (MABAC) methods by employing Picture fuzzy sets (PiFS) are employed to determine weight of agile attributes and superiority of LCCs based on agile attributes in the market, respectively. To check the consistency and robustness of the results for the proposed approach, comparative and sensitivity analysis are performed at the end of the study.

While the ranking orders of agile attributes are Strategic Responsiveness (AG1), Financial Management (AG4), Quality (AG2), Digital integration (AG3) and Reliability (AG5), respectively, LCC2 is selected as the best agile airline company in Turkey with respect to agile attributes. SWARA and MABAC method based on PiFS is appropriate and effective method to evaluate agile attributes that has important reference value for the airline companies in aviation industry.

The findings of this study will support managers in the airline industry to conduct airline operations more flexibly and effectively to take sustainable competitive advantage in unexpected and dynamic environment.

To the author' best knowledge, this study is the first developed to identify the attributes necessary to increase agility in LCCs. Thus, as a systematic tool, a framework is developed for the implementation of agile attributes to achieve sustainable competitive advantage in the airline industry and presented a roadmap for airline managers to deal with crises and challenging situations by satisfying customer and increasing competitiveness.

Every day, small and big incidents happen all over the world, and given the human, financial and spiritual damage they cause, proper planning should be sought to deal with them so they can be appropriately managed in times of crisis. This study aims to examine humanitarian supply chain models.

A new model is developed to pursue the necessary relations in an optimal way that will minimize human, financial and moral losses. In this developed model, in order to optimize the problem and minimize the amount of human and financial losses, the following subjects have been applied: magnitude of the areas in which an accident may occur as obtained by multiple attribute decision-making methods, the distances between relief centers, the number of available rescuers, the number of rescuers required and the risk level of each patient which is determined using previous data and machine learning (ML) algorithms.

For this purpose, a case study in the east of Tehran has been conducted. According to the results obtained from the algorithms, problem modeling and case study, the accuracy of the proposed model is evaluated very well.

Obtaining each injured person's priority using ML techniques and each area's importance or risk level, besides developing a bi-objective mathematical model and using multiple attribute decision-making methods, make this study unique among very few studies that concern ML in the humanitarian supply chain. Moreover, the findings validate the results and the model's functionality very well.

This study focused on exploring the performance factors (PFs) that impact Infrastructure Sanitation Projects (ISSPs) in the construction sector. The aim was twofold: firstly, to identify these crucial PFs and secondly, to develop a robust performance model capable of effectively measuring and assessing the intricate interdependencies and correlations within ISSPs. By achieving these objectives, the study aimed to provide valuable insights into and tools for enhancing the efficiency and effectiveness of sanitation projects in the construction industry.

To achieve the study's aim, the methodology for identifying the PFs for ISSPs involved several steps: extensive literature review, interviews with Egyptian industry experts, a questionnaire survey targeting industry practitioners and an analysis using the Relative Importance Index (RII), Pareto principle and analytic network process (ANP). The RII ranked factor importance,  and Pareto identified the top 20% for ANP, which determined connections and interdependencies among these factors.

The literature review identified 36 PFs, and an additional 13 were uncovered during interviews. The highest-ranked PF is PF5, while PF19 is the lowest-ranked. Pareto principle selected 11 PFs, representing the top 20% of factors. The ANP model produced an application for measuring ISSP effectiveness, validated through two case studies. Application results were 92.25% and 91.48%, compared to actual results of 95.77% and 97.37%, indicating its effectiveness and accuracy, respectively.

This study addresses a significant knowledge gap by identifying the critical PFs that influence ISSPs within the construction industry. Subsequently, it constructs a novel performance model, resulting in the development of a practical computer application aimed at measuring and evaluating the performance of these projects.

This study aims to analyze lean wastes for the poultry sector in Turkey and link lean tools to this study, focusing on identifying each lean waste that affects poultry production and proposing solutions for preventing these lean wastes in the sector. The proposed solutions aim to improve processes by suggesting different lean tools and their applications for the poultry sector.

The study consists of two different applications. First, the waste relationship matrix (WRM) was created to reveal the relationship between seven lean wastes and their importance order. Then, after determining lean tools for eliminating lean wastes, the optimum weight ranking and consistency ratio of the most suitable lean tools were calculated for these wastes and ranked with the best-worst method (BWM).

Results showed that overproduction is the most critical waste that impacts other wastes, followed by defect waste. Due to the nature of the sector, these wastes not only result in economic loss for the company but also in food waste and loss and issues related to animal welfare. Furthermore, the Kaizen approach and 5S implementation are the methods to eliminate these wastes. Detailed discussion on the link between lean tools and lean wastes is provided for the poultry sector.

This is the first study that theoretically and empirically identifies the potential lean waste affecting the poultry sector and provides lean tools for eliminating these wastes. Sector-specific explanations and discussions are presented in the study to show the applicability of lean approaches in the poultry sector to eliminate waste. In addition, this study is the first to integrate the WRM and BWM.

The aim of this paper is to explore the possibility of using the Define-Measure-Analyze-Improve-Control (DMAIC) cycle, process mining (PM) and multi-criteria decision methods in an integrated way so that these three elements combined result in a methodology called the Agile DMAIC cycle, which brings more agility and reliability in the execution of the Six Sigma process.

The approach taken by the authors in this study was to analyze the studies arising from this union of concepts and to focus on using PM tools where appropriate to accelerate the DMAIC cycle by improving the first two steps, and to test using the AHP as a decision-making process, to bring more excellent reliability in the definition of indicators.

It was indicated that there was a gain with acquiring indicators and process maps generated by PM. And through the AHP, there was a greater accuracy in determining the importance of the indicators.

Through the results and findings of this study, more organizations can understand the potential of integrating Six Sigma and PM. It was just developed for the first two steps of the DMAIC cycle, and it is also a replicable method for any Six Sigma project where data acquisition through mining is possible.

The authors develop a fully applicable and understandable methodology which can be replicated in other settings and expanded in future research.

This study aims to investigate the effects of organizational culture factors on the selection of software process development models and develops a conceptual model for selecting and adopting process development models with an organizational culture approach, using 12 criteria and their sub-criteria defined in Fey and Denison’s model (12 criteria).

The research hypotheses were investigated using statistical analysis, and then the criteria and sub-criteria were selected based on Fey and Denison’s model and the experts’ viewpoints. Afterward, the organizational culture of the selected company was measured using the data from 2016 and 2017, based on Fey and Denison’s questionnaire. Due to the correlation between the criteria, using the decision-making trial and evaluation technique, the correlation between sub-criteria were determined, and by analytical network process method and using Super-Decision software, the process development model was preferred to the 12 common models in information systems development.

Results indicated a significant and positive effect of organizational culture factors (except the core values factor) on the selection of development models. Also, by changing the value of organizational culture, the selected process development model changed either. Sensitivity analysis performed on the sub-criteria implied that by changing and improving some sub-criteria, the organization will be ready and willing to use the agile or risk-based models such as spiral and win-win models. Concerning units where the mentioned indicators were at moderate and low limits, models such as waterfall, V-shaped and incremental worked more appropriately.

While many studies were performed in comparing development models and investigating their strengths and weaknesses, and the impact of organizational culture on the success of information technology projects, literature indicated that the impact of organizational sub-culture prevailing in the selection of development process models has not been investigated. In this study, new factors and indicators were addressed affecting the selection of development models with a focus on organizational culture. Correlation among the factors and indicators was also investigated and, finally, a conceptual model was proposed for proper adoption of the models and methodologies of system development.