Search results

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.

The COVID-19 pandemic has posed many challenges in almost all sectors around the globe. Because of the pandemic, government entities responsible for managing health-care resources face challenges in managing and distributing their limited and valuable health resources. In addition, severe outbreaks may occur in a small or large geographical area. Therefore, county-level preparation is crucial for officials and organizations who manage such disease outbreaks. However, most COVID-19-related research projects have focused on either state- or country-level. Only a few studies have considered county-level preparations, such as identifying high-risk counties of a particular state to fight against the COVID-19 pandemic. Therefore, the purpose of this research is to prioritize counties in a state based on their COVID-19-related risks to manage the COVID outbreak effectively.

In this research, the authors use a systematic hybrid approach that uses a clustering technique to group counties that share similar COVID conditions and use a multi-criteria decision-making approach – the analytic hierarchy process – to rank clusters with respect to the severity of the pandemic. The clustering was performed using two methods, k-means and fuzzy c-means, but only one of them was used at a time during the experiment.

The results of this study indicate that the proposed approach can effectively identify and rank the most vulnerable counties in a particular state. Hence, state health resources managing entities can identify counties in desperate need of more attention before they allocate their resources and better prepare those counties before another surge.

To the best of the authors’ knowledge, this study is the first to use both an unsupervised learning approach and the analytic hierarchy process to identify and rank state counties in accordance with the severity of COVID-19.

Sustainable development goals (SDGs) are gaining significant importance in the current environment. Many businesses are keen to adopt SDGs to get a competitive edge. There are certain challenges in realigning the present working scenario for sustainable development, which is a primary concern for society. Various firms are adopting sustainable engineering (SE) practices to tackle such issues. Artificial intelligence (AI) is an emerging technology that can help the ineffective adoption of sustainable practices in an uncertain environment. In this regard, there is a need to review the current research practices in the field of SE in AI. The purpose of the present study is to comprehensive review the research trend in the field of SE in AI.

This work presents a review of AI applications in SE for decision-making in an uncertain environment. SCOPUS database was considered for shortlisting the articles. Specific keywords on AI, SE and decision-making were given, and a total of 127 articles were shortlisted after implying inclusion and exclusion criteria.

Bibliometric study and network analyses were performed to analyse the current research trends and to see the research collaboration between researchers and countries. Emerging research themes were identified by using structural topic modelling (STM) and were discussed further.

Research propositions corresponding to each research theme were presented for future research directions. Finally, the implications of the study were discussed.

This work presents a systematic review of articles in the field of AI applications in SE with the help of bibliometric study, network analyses and STM.

The advancements in internet technologies and the use of sophisticated digital devices in supply chain operations incessantly generate enormous amounts of data, which is termed as big data (BD). The BD technologies have brought about a paradigm shift in the supply chain decision-making towards profitability and sustainability. The aim of this work is to address the issue of implementation of the big data analytics (BDA) in sustainable supply chain management (SSCM) by identifying the relevant factors and developing a structural model for this purpose.

Through a comprehensive literature review and experts’ opinion, the crucial factors are found using the PESTEL framework, which covers political, economic, social, technological, environmental and legal factors. The structural model is developed based on the results of the total interpretive structural modelling (TISM) procedure and MICMAC analysis.

The policy support regarding IT, culture of data-based decision-making, inappropriate selection of BDA technologies and the laws related to data security and privacy are found to affect most of the other factors. Also, the company’s vision towards environmental performance and willingness for material and energy optimization are found to be crucial for the environmental and social sustainability of the supply chain.

The study is focused on the manufacturing supply chain in emerging economies. It may be extended to other industry sectors and geographical areas. Also, additional factors may be included to make the model more robust.

The proposed model imparts an understanding of the relative importance and interrelationship of factors. This may be useful to managers to assess their strengths and weaknesses and ascertain their priorities in the context of their organization for developing a suitable investment plan.

The study establishes the importance of BDA for conservation and management of energy and material. This is crucial to develop strategies for enhancing eco-efficiency of the supply chain, which in turn enhances the economic returns for the society.

This study addresses the implementation of BDA in SSCM in the context of emerging economies. It uses the PESTEL framework for identifying the factors, which is a comprehensive framework for strategic planning and decision-making. This study makes use of the TISM methodology for model development and deliberates on the social and environmental implications too, apart from theoretical and managerial implications.

The rapid development of urban areas in Sleman District, Indonesia, has created new challenges for firefighting response services. One of the primary challenges is to identify the optimal locations for new fire stations, to improve service quality and maximize service coverage within the specified time.

This paper proposes a method for precisely calculating travel time that integrates delay time caused by traffic lights, intersections and congestion. The study highlights the importance of precise calculation of travel time in order to provide a more accurate understanding of the service area covered by the fire stations. The proposed method utilizes network analysis in ArcGIS, the analytical hierarchy process (AHP) and simple additive weighting (SAW) to accurately calculate travel time and to identify the best locations for new fire stations. The identification of new site was based on service safety, service quality, service costs and demographic factors and applied to the Sleman district in Indonesia.

The results showed that the total area covered by old and new fire stations decreased from 61% to 31.8% of the study area when the adjusted default speed scenario was implemented.

The results indicated that the default speed scenario could provide misleading information about the service area, while the adjusted default speed scenario improved service quality and maximized service coverage.

The proposed method provides decision-makers with an effective tool to make informed decisions on optimal locations for new fire stations and thus enhance emergency response and public safety.

Amid rapid technological progress, the construction industry is embracing Construction 4.0, redefining work practices through emerging technologies. However, the implications of Construction 4.0 technologies to enhancing well-being are still poorly understood. Particularly, the challenge lies in selecting technologies that critically contribute to well-being enhancement. Therefore, this study aims to evaluate the implications of Construction 4.0 technologies to enhancing well-being.

A list of Construction 4.0 technologies was identified from a national strategic plan on Construction 4.0, using Malaysia as a case study. Fourteen construction industry experts were selected to evaluate the implications of Construction 4.0 technologies on well-being using fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The expert judgment was measured using linguistic variables that were transformed into fuzzy values. Then, the collected data was analyzed using the following analyses: fuzzy TOPSIS, Pareto, normalization, sensitivity, ranking performance and correlation.

Six Construction 4.0 technologies are critical to enhancing well-being: cloud & real-time collaboration, big data & predictive analytics, Internet of Things, building information modeling, autonomous construction and augmented reality & virtualization. In addition, artificial intelligence and advanced building materials are recommended to be implemented simultaneously as a very strong correlation exists between them.

The novelty of this study lies in a comprehensive understanding of the implications of Construction 4.0 technologies to enhancing well-being. The findings can assist researchers, industry practitioners and policymakers in making well-informed decisions to select Construction 4.0 technologies when targeting the enhancement of the overall well-being of the local construction industry.

This study aims to examine the role of supplier selection and supplier monitoring in public procurement efficiency in terms of cost reduction in Tanzania.

A structured questionnaire was used to collect cross-sectional survey data from 179 public procuring entities in Tanzania. Structural equation modelling (SEM) was used to analyse the collected data.

The findings revealed that supplier selection and supplier monitoring are positive and significant predictors of public procurement efficiency in terms of cost reduction.

This study was conducted in Tanzanian public procurement contexts, so generalisations should be made with caution. Also, this study collected cross-sectional data; other studies may consider longitudinal data.

This study provides procurement practitioners with insights into selecting the proper suppliers and embracing supplier monitoring to achieve procurement efficiency in terms of cost reduction.

This study examines the effects of supplier selection and supplier monitoring on procurement cost reduction as a measure of public procurement efficiency in the Tanzanian context. Consequently, it provides empirical evidence of supplier management practices in the public procurement context.

Green HRM practices in the hospitality sector are now receiving growing interest. However, the extent to which these practices contribute towards employee non-green workplace outcomes remains largely unknown. This study explores the relationships among green HRM practices, happiness at work, employee resilience, and feedback-seeking behaviour.

The study employs two-wave data from a sample of 306 five-star hotel employees in India. Using partial least square-structural equation modelling, the relationships are tested.

The study’s results demonstrate that green HRM practices positively impact happiness at work, employee resilience, and feedback-seeking behaviour. Additionally, the relationship between green HRM practices and feedback-seeking behaviour and employee resilience is mediated by happiness at work.

Drawing on the Job Demands-Resources Theory, Social Exchange Theory, and Broaden and Build theory, this paper proposes that green HRM practices can contribute to happiness at work, employee resilience, and feedback-seeking behaviour.

To establish a positive connection between green HRM practices and employee outcomes, organizations must recognize the vital role played by happiness at work as a mediator. This means that organizations must implement green HRM practices and ensure their positive impact on employee happiness at work.

The originality of this research lies in its holistic approach to green HRM outcomes, suggesting that the benefits of these practices extend beyond environmental impacts to influence the psychological and behavioural dimensions of employees.

Prefabricated products are continually entering the building construction market; yet, the decision to use prefabricated products in a construction project is based mostly on personal preferences and the evaluation of direct costs. Researchers and practitioners have debated appropriate measurement systems for evaluating the impacts of prefabricated products and for comparing them with conventional on-site construction practices. The more advanced, cost–benefit approach to evaluating prefabricated products often inspires controversy because it may generate inaccurate results when converting non-monetary effects into costs. As prefabrication may affect multiple organisations and product subsystems, the method used to decide on production methods should consider multiple direct and indirect impacts, including nonmonetary ones. Thus, this study aims to develop a multi-criteria method to evaluate both the monetary and non-monetary impacts of prefabrication solutions to facilitate decision-making on whether to use prefabricated products.

Drawing upon a literature review, this research suggests a multi-criteria method that combines the choosing-by-advantage approach with a cost–benefit analysis. The method was presented for validation in focus group discussions and tested in a case involving a prefabricated bathroom.

The analysis indicates that the method helps a project’s stakeholders communicate about the relative merits of prefabrication and conventional construction while facilitating the final decision of whether to use prefabrication.

This research contributes a method of evaluating the monetary and non-monetary impacts of prefabricated products. The research underlines the need to evaluate the diverse benefits and sacrifices that stakeholder face when considering production methods in construction.

This paper uses the complex proportionality assessment (COPRAS) method to examine the driving factors of Industry 4.0 (I4) technologies for lean implementation in small and medium-sized enterprises (SMEs).

Adopting I4 technology is imperative for SMEs seeking to maintain competitiveness within the manufacturing sector. A thorough understanding of the driving factors involved is required to support the implementation of I4. For this objective, the multi-criteria decision-making (MCDM) tool COPRAS was used to efficiently analyze and rank these driving elements based on their importance. These factors can help small and medium-sized firms (SMEs) prioritize their efforts and investments in I4 technologies for lean implementation.

This study evaluates and prioritizes the nine I4 factors according to the perceptions of SMEs. The ranking offers significant insights into the factors SMEs consider more accessible and effective when adopting I4 technologies.

The author's original contribution is to examine I4 driving factors for lean implementation in SMEs using COPRAS.