Search results

This study proposed a model based on knowledge management infrastructure capabilities (KMICs) to explore that how functional flexibility (FF) and knowledge sharing (KS) plays a mediating role between KMIC and innovative work behavior (IWB) among production-line workers.

Data were collected from 894 workers through self-administered questionnaires from manufacturing businesses. The outcomes of the study revealed that KMIC has a significant and positive relationship with IWB. Second, FF and KS fully mediate between KMIC and IWB. Finally, the moderating role of KS between KMIC and FF was also supported by this study.

This study offers the empirical evidence on how to flourish the mechanism of FF and KS in manufacturing concerns. Additionally, some facts are also highlighted by this study that should be eloquent options for HR managers to understand the nexus of KMIC, KS and FF for enhancing the IWB among production-line workers. Moreover, this study contributed to noteworthy inferences for management by focusing on KMIC as a fundamental organizational level factor for IWB via KS and FF.

This is the first study in the which emphasis on KMIC for explaining IWB through employee FF and KS in settings such as manufacturing concern where the implementation of new working methods is necessary.

The purpose of current flow configuration is to spotlights the thermophysical aspects of magnetohydrodynamics (MHD) viscoinelastic fluid flow over a stretching surface.

The fluid momentum problem is mathematically formulated by using the Prandtl–Eyring constitutive law. Also, the non-Fourier heat flux model is considered to disclose the heat transfer characteristics. The governing problem contains the nonlinear partial differential equations with appropriate boundary conditions. To facilitate the computation process, the governing problem is transmuted into dimensionless form via appropriate group of scaling transforms. The numerical technique shooting method is used to solve dimensionless boundary value problem.

The expressions for dimensionless velocity and temperature are found and investigated under different parametric conditions. The important features of fluid flow near the wall, i.e. wall friction factor and wall heat flux, are deliberated by altering the pertinent parameters. The impacts of governing parameters are highlighted in graphical as well as tabular manner against focused physical quantities (velocity, temperature, wall friction factor and wall heat flux). A comparison is presented to justify the computed results, it can be noticed that present results have quite resemblance with previous literature which led to confidence on the present computations.

The computed results are quite useful for researchers working in theoretical physics. Additionally, computed results are very useful in industry and daily-use processes.

The purpose of this research is to identify major barriers to the implementation of reverse logistics (RL). Also, the study addresses best practices among reuse, remanufacture, recycling, refurbishment and repair as alternatives for RL processes.

This study targets supply chain management experts for their opinions regarding the identification of critical barriers and alternatives for RL implementation. Their opinions were extracted through a Web questionnaire based on 14 criteria with 5 alternatives. The tools of multi-criteria decision-making are used for analysis, i.e. fuzzy VIKOR and fuzzy TOPSIS.

The results indicate that lack of recognition of competitive advantage to be gained through RL practice is the most critical barrier to RL implementation. The least barrier or major facilitator for RL is “supportive initiative for end-of-life products.” The top-ranked alternative in this study is reuse followed by remanufacturing. The least important alternative is “repair” in the case of Pakistan. These alternatives are ranked based on “q values” derived through fuzzy VIKOR.

The results of this study can only be generalized for the manufacturing sector of Pakistan during the period of the study.

The findings of this study will assist managers in deploying the best practices concerning RL.

Fuzzy VIKOR and fuzzy TOPSIS have not been applied to RL alternatives in previous research.

This study aims to investigate the direct impact of knowledge sharing (KS) and functional flexibility (FF) on innovative work behavior (IWB) of small medium enterprises (SME’s) employees. This study also observes the mediating role of FF in the connection between KS and IWB.

This study adapted a quantitative methodology and used the cross-sectional data. Data were collected from the 751 workers of SMEs to validate the mediation model.

Results reveal that KS and FF significantly affect IWB in SME’s workers. The findings also reveal that FF acts as a mediator between KS and IWB link.

The live experience of currently working employees shows that IWB is dependent of employees' KS and FF. Moreover, this study contributed to the streams of knowledge management and organizational innovation perspective by emphasizing upon the mediating mechanism of FF.

The study was conducted with the primary objective of measuring the association between the disputant’s expenses and Dispute Resolution Council (DRC) effectiveness in the study area.

The current study followed a quantitative research design. To obtain the study objectives, data was collected from a sample of 387 respondents in the selected three Tehsils of District Mardan, Pakistan. The respondents were selected through multistage stratified random sampling. At bivariate and multivariate level analyses, chi-square test and Gamma (γ) test statistics were used to test the relationship between variables (expenses of the disputants and effectiveness of DRC). Gender, monthly income and literacy status were used as control variables at the multivariate level.

At the bivariate level analysis, the study found a significant association (P = 0.05) of office of DRC is easily accessible, DRC as a cost-effective justice system as compared to other, availability of a vehicle to reach the DRC office and affordable amount for preparation of documents and filing the case with the effectiveness of DRC. At the multivariate level, the study portrayed that the expenses of the disputants enhance the effectiveness of DRC in males to a greater extent than females. However, the costs of the disputants were a universal feature to explain the efficacy of DRC irrespective of monthly income and literacy status.

The present study was limited to cost and expenditure of the disputants which was associated with effectiveness of DRC with collaboration of gender, monthly income and literacy status. Moreover, a representation of “387” was only selected but it was enough for validity and reliability of the research dynamics.

The current study is highly significant for the policymakers for devising alternate policies for disputes resolution as the study focused on the cost and expenditure and recommend suggestions that how to improve the effectiveness of DRC in easy and timely disposal of disputes.

The main objectives of the study is to examine the association between cost and expenditure of the disputant and effectiveness of DRC. In addition, to measure the influence of gender, income and literacy status on the association between the association between cost and expenditure of the disputant and effectiveness of DRC.

The current study is highly significant for policymakers to devise alternate policies for dispute resolution. The study focused on the cost and expenditure and recommended suggestions for improving the effectiveness of DRC in easy and timely disposal of disputes.

Cement industry for both developed and developing countries is important from the economic point of view. It is playing a vital role in economic development of a developing country like Pakistan. However, these industries are posing threat to the environment, human health and plant species. The purpose of this paper is to identify the most critical factors of cement industry that have a negative impact on the environment, human health and plant species in the context of Pakistan.

The factors are categorized into air pollution, noise pollution, soil pollution, human health and plant species. These factors are categorized on the basis of previous literature and environmental safety reports. Air pollution is caused by iron and sulphur while noise pollution is mainly caused by crusher room and rotatory kiln end. The soil is being polluted by zinc and lead while human health and plant species are being damaged by sulphur dioxide and nitrogen dioxide. For the analysis purpose, a multi-criteria decision-making (MCDM) technique, i.e., decision-making trial and evaluation laboratory (DEMATEL) is used.

The result shows that the major cause of air pollution is “sulphur” while “crusher room and rotatory kiln end” are responsible for noise pollution. On the other hand, “mercury” is responsible for causing soil pollution while human health and plant species are influenced by the toxic effect of “nitrogen dioxide.”

The results obtained are specific to cement manufacturing industry of Pakistan and cannot be generalized for any other manufacturing sector.

The proposed methodology shows the most critical factors toward which concertation should be given for mitigating their impact. This study will help the government and the cement industry to focus on all those elements that are the most responsible for causing different types of pollution.

No such work is reported in previous research that proposes a framework using DEMATEL technique for analysis of critical factors of cement industries that have a dangerous impact on the environment and human health, especially in a developing country, like Pakistan.

The change in climate and depletion of natural resources because of the harmful emissions from different materials becomes a main issue for the globe. Some of the developed and developing countries have focused on this issue and performed research to provide a solution. The purpose of this study is to identify the best types of concrete based on its impact on the environment and economy.

The life cycle assessment and life cycle cost analysis of six concrete mixtures that include construction and demolition wastes (CDW), marble sludge, rice husk and bagasse ash as a partial replacement of cement, are performed. These types of concrete are compared with each other and with ordinary concrete to select the best possible concrete type for a developing country, like Pakistan.

The results show that, although for an agricultural country like Pakistan, the agriculture wastes such as rice husk and bagasse ash are preferable to be used, if the emissions of CO₂ and CO from rice husk and NOx and SO₂ from bagasse ash are properly controlled. However, based on the results, it is recommended to use the CDW in concrete because of the small amount of air emissions and affordable prices.

Through this study, a path has been provided to construction companies and relative government organizations of Pakistan, which leads to sustainable practices in the construction industry. Moreover, the base is provided for future researchers who want to work in this area, as for Pakistan, there is no database available that helps to identify the impact of different concrete on the environment.

The purpose of this paper is to discuss the importance of mission and vision in the process of state development. Using the case of Pakistan, it will be argued that state organizations do not develop and find the right direction without outlining a clear mission and vision which will be beneficial to all citizens, who are the real stakeholders.

Yin (2003) and Baxter and Jack (2008) argue that case study is an enriched method to explore a complex relationship. The complex relationship may be understood better by qualitative methods than quantitative. Following their suggestion, case study method will be adopted to understand the relationship between the mission and vision and state development. In this study, Pakistan will be used as a case. Moreover, the technique of historical analysis will be employed to understand this relationship. Historical analysis is important because the repercussions of current actions can only be evaluated in the future.

The paper shows the importance of “mission and vision” for state development. Using Pakistan as the case, it is argued that a state can lose its direction without having a clear mission and vision. It is further contended that it is not erection of institutions or verbal/written pronouncements and slogans, but a strong commitment to the mission and the vision brings the required change, which helps to develop a state. In the future research, the researcher can further examine the role of mission and vision in relation to state development.

The limitation of this study is that it has only focussed on the leadership and politics of Pakistan. In the future, a comparative study investigation may be useful.

The research is useful for political leaders, political scientists and public management researchers.

The research is unique and original that it evaluates the role of leadership and the development of the state from the perspective of mission and vision, which has not been done in the earlier research. Moreover, the paper elaborates the concept of state development.

This research aims to concentrate on the important concern that how social capital (SC) influences business model innovation (BMI) in the course of the mediating role of organizational learning capabilities (OLC) and the moderating role of entrepreneurial orientation (EO). In the context of small and medium enterprises (SMEs), this study empirically tested a theoretical model of BMI to advocate a mechanism for the analysis of its significant determinants.

In order to achieve the objective of the research, survey method was utilized, and data were collected from 521 CEOs, MDs and the owners of ICT sector SMEs. Correlation, causal step approach and regression analysis were used to test the proposed model.

Finding of the research advocates that OLC mediate the relationship between SC and BMI. In addition, stronger EO augments the association between OLC and BMI.

The study adds to the literature by providing insights regarding the impact of SC, OLC and EO on BMI of small firms.

This research enriches the existing knowledge by testing a mediating role of OLC between SC-BMI link and, therefore, makes an important addition to the existing knowledge in the context of SMEs by concentrating on the relationship between SC, OLC, BMI and EO.

The present study aims to investigate the impact of corporate governance proxies by ownership structure and firm-specific characteristics, i.e. firm size, leverage, growth opportunities, previous year dividend, firm risk, profitability, and liquidity on dividend behavior of the Pakistan Stock Exchange (PSX) listed firms.

Final sample of the study consists of 140 PSX-listed firms. The study covers a period of six years, starting from 2015 to 2020. Dividend payout dummy, dividend payout ratio, and dividend yield were used to assess the dividend behavior of the sample firms. The appropriate regression procedures (logistic, probit, ordinary least square (OLS), and fixed effect regression) are used to test the study hypothesis. To check the robustness of the result, a system GMM estimation technique is also used in the present study.

The study reveals that institutional ownership, foreign ownership, and individual ownership have a significant positive whereas managerial ownership has a significant negative impact on the dividend decision of sample firms. Among firm-specific characteristics, it was found that liquidity, profitability, and the previous year's dividend were significantly positive, while growth opportunities were significantly inversely associated with dividend payout decisions of PSX-listed firms.

This study sheds light on the relationship between dividend policy, ownership structure, and firm-specific factors in the context of an emerging market like Pakistan. The study's findings have important implications for managers, minority shareholders, lawmakers, and investors looking for guidance on the dividend policy of publicly-traded non-financial firms.

The literature lacks studies that together analyze the ownership characteristics and firm-specific variables on dividend decisions, particularly in the context of developing economies. The current study aims to fill this gap.