Search results

The paper aims to consider non‐viscous, laminar mixed convection boundary‐layer flow over a horizontal moving porous flat plate, with chemical reaction.

The governing equations are expressed in non‐dimensional form and the series solutions of coupled system of equations are constructed for velocity, temperature and concentration functions using numerical method.

The investigated parameters are: buoyancy parameter, chemical reaction parameter, order of chemical reaction, Prandtl number and Schmidt number.

The partial differential equations are transformed to ordinary differential equations. The method of one parameter continuous group theory is used for this transformation.

The purpose of this paper is to analyze the mangnetohydrodynamic boundary layer flow of a viscous, incompressible and electrically conducting non-Newtonian nanofluid obeying power-law model over a non-linear stretching sheet under the influence of thermal radiation with heat source/sink.

The transverse magnetic field is applied normal to the sheet. The model used for the nanofluid incorporates the effects of Brownian motion with thermophoresis in the presence of thermal radiation. On this regard, thermophoresis effect on convective heat transfer on nanofluids are investigated simultaneously. The governing partial differential equations are reduced to ordinary differential equations by suitable similarity transformations which are solved numerically by variational finite element method.

The computations carried out for some values of the power-law index, magnetic parameter, radiation parameter, Brownian motion and thermophoresis. The effect of these parameters on the velocity, temperature and nanoparticle volume fraction distribution are presented graphically. The skin friction coefficient, Nusselt number and Sherwood number for various values of the flow parameters of the problem are also presented.

To the best of the authors’ knowledge, no investigations has been reported regarding the study of non-Newtonian nanofluids which obeying power-law model over a nonlinear stretching sheet. The principal aim of this paper is to study the boundary layer MHD flow of a non-Newtonian power-law model over a non-linear stretching sheet on a quotient viscous incompressible electrically conducting with a nanofluid.

The purpose of this paper is to study the boundary layer flow and heat transfer of a power-law non-Newtonian nanofluid over a non-linearly stretching sheet.

The governing equations describing the problem are transformed into a nonlinear ordinary differential equations by suitable similarity transformations. The resulting equations for this investigation are solved numerically by using the variational finite element method.

It was found that the local Nusselt number increases by increasing the Prandtl number, stretching sheet parameter and decreases by increasing the power-law index, thermophoresis parameter and Lewis number. Increases in the stretching sheet parameter, Prandtl number and thermophoresis parameter decrease the local Sherwood number values. The effects of Brownian motion and Lewis number lead to increases in the local Sherwood number values.

The work is relatively original as very little work has been reported on non-Newtonian nanofluids.

The analysis of boundary layers is needed to reflect the behaviour of fluid flows in current industrial processes and to improve the efficacy of products. Hence, this study aims to analyse the flow and heat transfer performance of hybrid alumina-copper/water (Al₂O₃-Cu/H₂O) nanofluid with the inclusion of activation energy and binary chemical reaction effect towards a moving wedge.

The multivariable differential equations with partial derivatives are converted into a specific type of ordinary differential equations by using valid similarity transformations. The reduced mathematical model is elucidated in the MATLAB system by using the bvp4c procedure. This solution method is competent in delivering multiple solutions once appropriate assumptions are supplied.

The results of multiple control parameters have been studied, and the findings are verified to provide more than one solution. The coefficient of skin friction was discovered to be increased by adding nanoparticles volume fraction from 0% to 0.5% and 1%, by almost 1.6% and 3.2%. Besides, increasing the nanoparticles volume fraction improves heat transfer efficiency gradually. The inclusion of the activation energy factor displays a downward trend in the mass transfer rates, consequently reducing the concentration profile. In contrast, the increment of the binary reaction rate greatly facilitates the augmentation of mass transfer rates. There is a significant enhancement in the heat transfer rate, approximately 13.2%, when the suction effect dominates about 10% in the boundary layer flow. Additionally, the results revealed that as the activation energy rises, the temperature and concentration profiles rise as well. It is proved that the activation energy parameter boosts the concentration of chemical species in the boundary layer. A similar pattern emerges as the wedge angle parameter increases. The current effort aims to improve the thermal analysis process, particularly in real-world applications such as geothermal reservoirs, chemical engineering and food processing, which often encountered mass transfer phenomenon followed by chemical reactions with activation energy.

The present results are original and new for the study of flow and heat transfer over a permeable moving wedge in a hybrid nanofluid with activation energy and binary chemical reaction.

The purpose of this paper is to focus on the influence of multiple slips on MHD Williamson nanofluid flow embedded in porous medium towards a linearly stretching sheet that has been investigated numerically. The whole analysis has been carried out considering the presence of nth-order chemical reaction between base fluid and nanoparticles.

A similarity transformation technique has been adopted to convert non-linear governing partial differential equations into ordinary ones and then they are solved by using both the RK-4 method and Laplace transform homotopy perturbation method. The consequences of multiple slip parameters on dimensionless velocity, temperature and concentration and heat and mass transfer rates have been demonstrated using tabular and graphical outline.

The investigation explores that the Nusselt number reduces for escalating behaviour of velocity slip and thermal slip parameter. Fluid’s temperature rises in the presence of generative reaction parameter.

A fine conformity of the current results has been achieved after comparing with previous literature studies. Considering destructive chemical reaction, reduced Nusselt number is found to decrease, but reverse consequence has been noticed in the case of generative chemical reaction. Mass transport diminishes when the order of chemical reaction amplifies for both destructive and generative reactions.

The purpose of this study is to examine the impact of activation energy with binary chemical reaction for unsteady flow on permeable stretching surface.

The simultaneous effects of multiple slip and magneto-hydrodynamic effects at the boundary are taken into account. The thermal buoyancy parameter and thermal radiation are included in both energy and momentum equations, while expression of activation energy is considered in concentration equation. Three-stage Lobatto IIIa finite difference collocation technique with bvp4c MATLAB package is used to obtained numerical results.

The influence of key elements (Schmidt number, buoyancy force ratio factor, factor of radiation, magnetic element, unsteadiness factor, suction/injection parameter, Prandtl number, activation energy, chemical reaction rate parameter, heat source and sink parameters, velocity, thermal and concentration slips, porosity parameter and temperature difference parameter) on velocity, temperature and concentration profiles are illustrated pictorially. A detailed discussion is presented to see how the graphical aspects justify the physical prospect.

In the best of author’s knowledge, this work is yet not available in existing literature.

The purpose of this study is to study flow caused by rotating frame. Effects of Darcy–Forchheimer and porous medium are considered to study velocity field. Concentration field is discussed in presence of activation energy. Darcy–Forchheimer in a rotating frame is examined. Flow because of stretched sheet fills the porous space. Binary chemical reaction is entertained. Resulting system is numerically solved. The plots are arranged for rotational parameter, porosity parameter, coefficients of inertia, Prandtl number and Schmidt number. It is revealed that rotation on velocity has opposite effects when compared with temperature and concentration distributions. Skin friction coefficients and local Nusselt and Sherwood numbers are numerically discussed.

Darcy–Forchheimer in a rotating frame is examined. Flow because of stretched sheet fills the porous space. Binary chemical reaction is entertained. Resulting system is numerically solved. The plots are arranged for rotational parameter, porosity parameter, coefficients of inertia, Prandtl number and Schmidt number. It is revealed that rotation on velocity has opposite effects when compared with temperature and concentration distributions. Skin friction coefficients and local Nusselt and Sherwood numbers are numerically discussed.

The major findings here are as follows: an addition in porosity λ causes decay in velocity f′(η) while there is opposite behavior for temperature θ(η) and concentration ϕ(η) fields. θ and ϕ via β have similar results qualitatively. There is an opposite behavior of Pr on temperature and concentration. Inverse behavior of λ on ϕ and wall mass flux is noted. Concentration ϕ is decreasing function of reaction rate constant σ. Skin friction coefficient has similar qualitative results for λ and β. Temperature gradient −θ^′(0) is decreased by λ and β.

Here, the authors are interested to investigate rotating flow in a porous space. Dissipation and radiation effects are neglected. Effects of activation energy are studied. This work is not done yet in literature.

This study aims to present a numerical analysis of the behavior of the electric field and flow field characteristics under electrohydrodynamics (EHD) force. The influence of the jet airflow under the EHD force is investigated when it impacts the inclined flat plate.

The high electrical voltage and angle of an inclined flat plate are tested in a range of 0–30 kV and 0–90^°, respectively. In this condition, the air is set in a porous medium and the inlet jet airflow is varied from 0–2 m/s.

The results of this study show that the electric field line patterns increase with increasing the electrical voltage and it affects the electric force increasing. The angle of inclined flat plate and the boundary of the computational model are influenced by the electric field line patterns and electrical voltage surface. The electric field pattern is the difference in the fluid flow pattern. The fluid flow is more expanded and more concentrated with increasing the angle of an inclined flat plate, the electrical voltage and the inlet jet airflow. The velocity field ratio is increased with increasing the electrical voltage but it is decreased with increasing the angle of the inclined flat plate and the inlet jet airflow.

The maximum Reynolds number, the maximum velocity field and the maximum cell Reynolds number are increased with increasing the electrical voltage, the inlet jet airflow and the angle of the inclined flat plate. In addition, the cell Reynolds number characteristics are more concentrated and more expanded with increasing the electrical voltage. The pattern of numerical results from the cell Reynolds number characteristics is similar to the pattern of the fluid flow characteristics. Finally, a similar trend of the maximum velocity field has appeared for experimental and numerical results so both techniques are in good agreement.

The purpose of this paper is to explore the novel aspects of activation energy in the nonlinearly convective flow of Walter-B nanofluid in view of Cattaneo–Christov double-diffusion model over a permeable stretched sheet. Features of nonlinear thermal radiation, dual stratification, non-uniform heat generation/absorption, MHD and binary chemical reaction are also evaluated for present flow problem. Walter-B nanomaterial model is employed to describe the significant slip mechanism of Brownian and thermophoresis diffusions. Generalized Fourier’s and Fick’s laws are examined through Cattaneo–Christov double-diffusion model. Modified Arrhenius formula for activation energy is also implemented.

Several techniques are employed for solving nonlinear differential equations. The authors have used a homotopy technique (HAM) for our nonlinear problem to get convergent solutions. The homotopy analysis method (HAM) is a semi-analytical technique to solve nonlinear coupled ordinary/partial differential equations. The capability of the HAM to naturally display convergence of the series solution is unusual in analytical and semi-analytic approaches to nonlinear partial differential equations. This analytical method has the following great advantages over other techniques:

• It provides a series solution without depending upon small/large physical parameters and applicable for not only weakly but also strongly nonlinear problems.

• It guarantees the convergence of series solutions for nonlinear problems.

• It provides us a great choice to select the base function of the required solution and the corresponding auxiliary linear operator of the homotopy.

It provides a series solution without depending upon small/large physical parameters and applicable for not only weakly but also strongly nonlinear problems.

It guarantees the convergence of series solutions for nonlinear problems.

It provides us a great choice to select the base function of the required solution and the corresponding auxiliary linear operator of the homotopy.

Brief mathematical description of HAM technique (Liao, 2012; Mabood et al., 2016) is as follows. For a general nonlinear equation:

where N denotes a nonlinear operator, x the independent variables and u(x) is an unknown function, respectively. By means of generalizing the traditional homotopy method, Liao (1992) creates the so-called zero-order deformation equation:

here q∈[0, 1] is the embedding parameter, H(x) ≠ 0 is an auxiliary function, h(≠ 0) is a nonzero parameter, L is an auxiliary linear operator, u_o(x) is an initial guess of u(x) and u ˆ ( x ; q ) is an unknown function, respectively. It is significant that one has great freedom to choose auxiliary things in HAM. Noticeably, when q=0 and q=1, following holds:

Expanding u ˆ ( x ; q ) in Taylor series with respect to (q), we have:

If the initial guess, the auxiliary linear operator, the auxiliary h and the auxiliary function are selected properly, then the series (4) converges at q=1, then we have:

By defining a vector u → = ( u o ( x ) , u 1 ( x ) , u 2 ( x ) , … , u n ( x ) ) , and differentiating Equation (2) m-times with respect to (q) and then setting q=0, we obtain the mth-order deformation equation:

where:

Applying L⁻¹ on both sides of Equation (6), we get:

In this way, we obtain u_m for m ⩾ 1, at mth-order, we have:

It is evident from obtained results that the nanoparticle concentration field is directly proportional to the chemical reaction with activation energy. Additionally, both temperature and concentration distributions are declining functions of thermal and solutal stratification parameters (P₁) and (P₂), respectively. Moreover, temperature Θ(Ω₁) enhances for greater values of Brownian motion parameter (N_b), non-uniform heat source/sink parameter (B₁) and thermophoresis factor (N_t). Reverse behavior of concentration ϒ(Ω₁) field is remarked in view of (N_b) and (N_t). Graphs and tables are also constructed to analyze the effect of different flow parameters on skin friction coefficient, local Nusselt number, Sherwood numbers, velocity, temperature and concentration fields.

The novelty of the present problem is to inspect the Arrhenius activation energy phenomena for viscoelastic Walter-B nanofluid model with additional features of nonlinear thermal radiation, non-uniform heat generation/absorption, nonlinear mixed convection, thermal and solutal stratification. The novel aspect of binary chemical reaction is analyzed to characterize the impact of activation energy in the presence of Cattaneo–Christov double-diffusion model. The mathematical model of Buongiorno is employed to incorporate Brownian motion and thermophoresis effects due to nanoparticles.

The present investigation aims to deal with the study of unsteady, heat-generating/-absorbing and chemically reacting Casson fluid flow over a vertical cone and flat plate saturated with non-Darcy porous medium in the presence of cross-diffusion effects.

A numerical computation for the governing equations has been performed using implicit finite difference method of Crank–Nicolson type.

The influence of various physical parameters on velocity, temperature and concentration distributions is illustrated graphically, and the physical aspects are discussed in detail. Numerical results for average skin-friction, Nusselt number and Sherwood number are tabulated for the pertaining physical parameters. Results indicate that Soret and Dufour effects have notable influence on heat and mass transfer characteristics of the fluid when the temperature and concentration gradients are high. It is also observed that the consideration of heat generation/absorption plays a vital role in predicting the heat transfer characteristics of moving fluids.

Consider a two-dimensional, unsteady, free convective flow of an incompressible Casson fluid over a vertical cone and a flat plate saturated with non-Darcy porous medium. The fluid properties are assumed to be constant except for density variations in the buoyancy force term. The fluid flow is moderate and the permeability of the medium is assumed to be low, so that the Forchheimer flow model is applicable.

The flow of Casson fluids (such as drilling muds, clay coatings and other suspensions, certain oils and greases, polymer melts and many emulsions), in the presence of heat transfer, is an important research area because of its relevance in the optimized processing of chocolate, toffee and other foodstuffs.

In the heat and mass transfer investigations, the Casson fluid model is found to be accurately applicable in many practical situations in the wings of polymer processing industries and biomechanics, etc.; some prominent examples are silicon suspensions, suspensions of bentonite in water and lithographic varnishes used for printing inks.

The motivation of the present study is to bring out the effects of heat source/sink, Soret and Dufour effects on chemically reacting Casson fluid flow over a vertical cone and flat plate saturated with non-Darcy porous medium. The flow of Casson fluids (such as certain oils and greases, polymer melts and many emulsions) in the presence of heat transfer is an important research area because of its relevance in the optimized processing of chocolate, toffee and other foodstuffs. A numerical computation for the governing equations has been performed using implicit finite difference method of the Crank–Nicolson type.